[asterisk-users] Re: mISDN, 2 Billion HFC ISDN cards, cannot dial or receive
UPDATE I can now dial and receive ISDN calls, but get an error message on the console intermitently and on boot. The error message is: mISDN dss1 fromup without proc pr=10180 dinfo(0) I don't know what any part of this means. Any thoughts please? Solution so far: http://www.asteriskguru.com/tutorials/bri.html has a good description of the difference between PTP and PTMP. I was incorrectly set to PTMP, and have now changed that. I also followed instructions from http://www.cognovis.de/entwickler/tips/asterisk/hardware/ and removed Hisax. After these two changes i could dial and receive BRI calls. I suspect Hisax was the critical one, as my other machine runs fine under PTMP. mISDN dss1 fromup without proc pr=10180 dinfo(0) On 26/09/06, Nigel Godfrey [EMAIL PROTECTED] wrote: I have two similar Billion HFC cards working on a bri-stuffed Asterisk 0.99 server which has run my phone system in the UK for 2 years without fault. The hardware is getting old, and I thought it wilse to upgrade at my own speed, rather than in response to a failure. I've installed Asterisk 1.2.12.1 via the Beronet install-asterisk script and it appears to have installed mISDN correctly too. Placing a call to ISDN I get silence for 6 seconds, and then the call is dropped. Placing an incoming call over the PSTN from my mobile phone, i get no acknowledgement from the Asterisk, and a continuous tone from the mobile. The mISDN log (log level 4) for the outgoing call is below. Does anyone have a similar system working? Does anyone know why nothing appears to happen? I'll post a solution when I get one... Thanks, Nigel. Tue Sep 26 21:48:04 2006: P[ 0] -- Group Call group: bri Tue Sep 26 21:48:04 2006: P[ 1] Group [bri] Port [1] Tue Sep 26 21:48:04 2006: P[ 1] portup:1 Tue Sep 26 21:48:04 2006: P[ 0] -- * NEW CHANNEL dad:02012345678 oad:(null) Tue Sep 26 21:48:04 2006: P[ 1] * Queuing chan 0x958c0a0 Tue Sep 26 21:48:04 2006: P[ 1] read_config: Getting Config Tue Sep 26 21:48:04 2006: P[ 1] config_jb: Called Tue Sep 26 21:48:04 2006: P[ 1] -- * CallGrp: PickupGrp: Tue Sep 26 21:48:04 2006: P[ 1] -- TON: Unknown Tue Sep 26 21:48:04 2006: P[ 1] -- LTON: Unknown Tue Sep 26 21:48:04 2006: P[ 1] -- CTON: Unknown Tue Sep 26 21:48:04 2006: P[ 1] * CALL: g:bri/02012345678 Tue Sep 26 21:48:04 2006: P[ 1] -- * dad:02012345678 tech:mISDN/1-u3 ctx:incoming Tue Sep 26 21:48:04 2006: P[ 1] -- * adding2newbc ext 02077347184 Tue Sep 26 21:48:04 2006: P[ 1] -- * adding2newbc callerid 31 Tue Sep 26 21:48:04 2006: P[ 1] update_config: Getting Config Tue Sep 26 21:48:04 2006: P[ 1] -- pres: 1 screen: 1 Tue Sep 26 21:48:04 2006: P[ 1] NO OPTS GIVEN Tue Sep 26 21:48:04 2006: P[ 1] I SEND:SETUP oad:31 dad:02012345678 pid:5 Tue Sep 26 21:48:04 2006: P[ 1] -- bc_state:BCHAN_CLEANED Tue Sep 26 21:48:04 2006: P[ 1] -- channel:0 mode:TE cause:16 ocause:16 rad: cad: Tue Sep 26 21:48:04 2006: P[ 1] -- info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0 Tue Sep 26 21:48:04 2006: P[ 1] -- caps:Speech pi:0 keypad: sending_complete:0 Tue Sep 26 21:48:04 2006: P[ 1] -- screen:1 -- pres:1 Tue Sep 26 21:48:04 2006: P[ 1] -- addr:0 l3id:50003 b_stid:0 layer_id:0 Tue Sep 26 21:48:04 2006: P[ 1] -- facility:FAC_NONE out_facility:FAC_NONE Tue Sep 26 21:48:04 2006: P[ 1] -- urate:0 rate:16 mode:0 user1:0 Tue Sep 26 21:48:04 2006: P[ 1] -- bc:953e504 h:0 sh:0 Tue Sep 26 21:48:04 2006: P[ 1] -- new_l3id 50004 Tue Sep 26 21:48:04 2006: P[ 1] Sending msg, prim:30580 addr:41000104 dinfo:50004 Tue Sep 26 21:48:04 2006: P[ 1] -- * SEND: State Dialing pid:5 Tue Sep 26 21:48:10 2006: P[ 1] handle_frm: frm-addr:42000103 frm-prim:3f182 Tue Sep 26 21:48:10 2006: P[ 1] -- lib: RELEASE_CR Ind with l3id:50004 Tue Sep 26 21:48:10 2006: P[ 1] -- lib: CLEANING UP l3id: 50004 Tue Sep 26 21:48:10 2006: P[ 1] empty_chan_in_stack: 255 Tue Sep 26 21:48:10 2006: P[ 1] $$$ CLEANUP CALLED pid:5 Tue Sep 26 21:48:10 2006: P[ 1] $$$ Already cleaned up bc with stid :0 Tue Sep 26 21:48:10 2006: P[ 1] I IND :CLEAN_UP oad: dad: pid:5 state:CALLING Tue Sep 26 21:48:10 2006: P[ 1] hangup_chan Tue Sep 26 21:48:10 2006: P[ 1] - queue_hangup Tue Sep 26 21:48:10 2006: P[ 1] release_chan: bc with l3id: 50004 Tue Sep 26 21:48:10 2006: P[ 1] * RELEASING CHANNEL pid:5 ctx:incoming dad:02077347184 oad:02077347184 state: CALLING Tue Sep 26 21:48:10 2006: P[ 1] -- * State Down Tue Sep 26 21:48:10 2006: P[ 1] -- Setting AST State to down ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] mISDN, 2 Billion HFC ISDN cards, cannot dial or receive
I have two similar Billion HFC cards working on a bri-stuffed Asterisk 0.99 server which has run my phone system in the UK for 2 years without fault. The hardware is getting old, and I thought it wilse to upgrade at my own speed, rather than in response to a failure. I've installed Asterisk 1.2.12.1 via the Beronet install-asterisk script and it appears to have installed mISDN correctly too. Placing a call to ISDN I get silence for 6 seconds, and then the call is dropped. Placing an incoming call over the PSTN from my mobile phone, i get no acknowledgement from the Asterisk, and a continuous tone from the mobile. The mISDN log (log level 4) for the outgoing call is below. Does anyone have a similar system working? Does anyone know why nothing appears to happen? I'll post a solution when I get one... Thanks, Nigel. Tue Sep 26 21:48:04 2006: P[ 0] -- Group Call group: bri Tue Sep 26 21:48:04 2006: P[ 1] Group [bri] Port [1] Tue Sep 26 21:48:04 2006: P[ 1] portup:1 Tue Sep 26 21:48:04 2006: P[ 0] -- * NEW CHANNEL dad:02012345678 oad:(null) Tue Sep 26 21:48:04 2006: P[ 1] * Queuing chan 0x958c0a0 Tue Sep 26 21:48:04 2006: P[ 1] read_config: Getting Config Tue Sep 26 21:48:04 2006: P[ 1] config_jb: Called Tue Sep 26 21:48:04 2006: P[ 1] -- * CallGrp: PickupGrp: Tue Sep 26 21:48:04 2006: P[ 1] -- TON: Unknown Tue Sep 26 21:48:04 2006: P[ 1] -- LTON: Unknown Tue Sep 26 21:48:04 2006: P[ 1] -- CTON: Unknown Tue Sep 26 21:48:04 2006: P[ 1] * CALL: g:bri/02012345678 Tue Sep 26 21:48:04 2006: P[ 1] -- * dad:02012345678 tech:mISDN/1-u3 ctx:incoming Tue Sep 26 21:48:04 2006: P[ 1] -- * adding2newbc ext 02077347184 Tue Sep 26 21:48:04 2006: P[ 1] -- * adding2newbc callerid 31 Tue Sep 26 21:48:04 2006: P[ 1] update_config: Getting Config Tue Sep 26 21:48:04 2006: P[ 1] -- pres: 1 screen: 1 Tue Sep 26 21:48:04 2006: P[ 1] NO OPTS GIVEN Tue Sep 26 21:48:04 2006: P[ 1] I SEND:SETUP oad:31 dad:02012345678 pid:5 Tue Sep 26 21:48:04 2006: P[ 1] -- bc_state:BCHAN_CLEANED Tue Sep 26 21:48:04 2006: P[ 1] -- channel:0 mode:TE cause:16 ocause:16 rad: cad: Tue Sep 26 21:48:04 2006: P[ 1] -- info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0 Tue Sep 26 21:48:04 2006: P[ 1] -- caps:Speech pi:0 keypad: sending_complete:0 Tue Sep 26 21:48:04 2006: P[ 1] -- screen:1 -- pres:1 Tue Sep 26 21:48:04 2006: P[ 1] -- addr:0 l3id:50003 b_stid:0 layer_id:0 Tue Sep 26 21:48:04 2006: P[ 1] -- facility:FAC_NONE out_facility:FAC_NONE Tue Sep 26 21:48:04 2006: P[ 1] -- urate:0 rate:16 mode:0 user1:0 Tue Sep 26 21:48:04 2006: P[ 1] -- bc:953e504 h:0 sh:0 Tue Sep 26 21:48:04 2006: P[ 1] -- new_l3id 50004 Tue Sep 26 21:48:04 2006: P[ 1] Sending msg, prim:30580 addr:41000104 dinfo:50004 Tue Sep 26 21:48:04 2006: P[ 1] -- * SEND: State Dialing pid:5 Tue Sep 26 21:48:10 2006: P[ 1] handle_frm: frm-addr:42000103 frm-prim:3f182 Tue Sep 26 21:48:10 2006: P[ 1] -- lib: RELEASE_CR Ind with l3id:50004 Tue Sep 26 21:48:10 2006: P[ 1] -- lib: CLEANING UP l3id: 50004 Tue Sep 26 21:48:10 2006: P[ 1] empty_chan_in_stack: 255 Tue Sep 26 21:48:10 2006: P[ 1] $$$ CLEANUP CALLED pid:5 Tue Sep 26 21:48:10 2006: P[ 1] $$$ Already cleaned up bc with stid :0 Tue Sep 26 21:48:10 2006: P[ 1] I IND :CLEAN_UP oad: dad: pid:5 state:CALLING Tue Sep 26 21:48:10 2006: P[ 1] hangup_chan Tue Sep 26 21:48:10 2006: P[ 1] - queue_hangup Tue Sep 26 21:48:10 2006: P[ 1] release_chan: bc with l3id: 50004 Tue Sep 26 21:48:10 2006: P[ 1] * RELEASING CHANNEL pid:5 ctx:incoming dad:02077347184 oad:02077347184 state: CALLING Tue Sep 26 21:48:10 2006: P[ 1] -- * State Down Tue Sep 26 21:48:10 2006: P[ 1] -- Setting AST State to down ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Zaptel-1.2.9 compile error
The work around is at: http://www.sineapps.com/news.php?rssid=1496 On 09/09/06, Samy Antoun [EMAIL PROTECTED] wrote: --- Bill Maidment [EMAIL PROTECTED] wrote: Hi I've just tried to compile the zaptel-1.2.9 release and I get the following error: Same here, using CentOS 4.4 kernel 2.6.9-42.0.2.ELsmp, got these errors when compiling zap: make[3]: /usr/src/zaptel/wct4xxp/../oct612x/octasic-helper: Command not found make[3]: /usr/src/zaptel/wct4xxp/../oct612x/octasic-helper: Command not found make[3]: *** No rule to make target `/usr/src/zaptel/wct4xxp/../oct612x/include/oct6100api/oct6100_api.h', needed by `/usr/src/zaptel/wct4xxp/vpm450m.o'. Stop. make[2]: *** [/usr/src/zaptel/wct4xxp] Error 2 make[1]: *** [_module_/usr/src/zaptel] Error 2 make: *** [linux26] Error 2 Hope someone has a workaround for this problem ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] ztdummy installed but choppy audio warning on load
On a new set up Centos 4.4, kernel 2.6.9-42.0.2.EL, yum updated, 2 BRI-HFC cards, no digium hardware. modprobe zaptel and modprobe ztdummy are both in rc.local, and lsmod gives: [EMAIL PROTECTED] ~]# lsmod Module Size Used by ztdummy 3924 0 zaptel206852 5 ztdummy When asterisk starts it logs warnings: Sep 9 20:28:00 WARNING[2645] res_musiconhold.c: Unable to open pseudo channel for timing... Sound may be choppy. Sep 9 20:28:02 WARNING[2645] chan_iax2.c: Unable to open IAX timing interface: No such file or directory I've Googled the error message, but to no avail. Any thoughts, please? nigel. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] ISDN BRI, and Trixbox
Hi, I have 2 Billion BRI ISDN cards, and intend to set up a Trixbox server. I currently have a Asterisk 1.0 server which has been running for a couple of years using Billion BRI cards and Junghanns BRIstuff. Trixbox, if it works, seems to offer various useful UI elements, and one easy standardised install. Or would I be better off not using Trixbox? Astbill perhaps? Does anyone have experience of setting up BRI in a Trixbox environment? I'll report on a good method for the record when I find one. Thanks, Nigel. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
