[asterisk-users] FXS channel bank
hello, We looking for a channel bank to connect 120 analogs phones, in SIP to an Asterisk .. Did someone have some product in mind. Thanks for you help.. bye bye ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Echo problem
Hi, Did you try to increase echotraining ?? echo training = 800 .. @++ Hello, We're in the process of setting up an Asterisk server, and are having echo problems. We have a Digium TE110P, and have tried the MG and MARK2 AGGRESSIVE echo cancellers, with a variety of gain levels and training times, and with both trunk and 1.2 branch versions of Zaptel, Libpre, and Asterisk. In all cases, callers from the PSTN hear their own voice echoed back after 1.5-2 seconds; none of these adjustments made a difference, except adjusting gain made the echo quieter. We followed these instructions in trying to eliminate echo: http://www.asteriskdocs.org/modules/tinycontent/content/docbook/current/docs-html/x1695.html Our lines come in from the telco in a PRI, then connect to a Tadiran switch which hands the lines off to Asterisk over a T1 card. We have done loopback tests with the Digium card with a loop plug in it. We're a bit stumped as to what to try next. Any suggestions or advice? Thanks ---Scott. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] spandsp 0.0.3 RxFax fax reception crashes bristuffed asterisk 1.2.13
Hi, No IaxModem is only a modem simulator. Let asterisk do the difference, and send it to you iax extension... @++. Jean-Yves Avenard a écrit : Hi On 12/20/06, Lee Howard [EMAIL PROTECTED] wrote: This thread seems like an awfully crazy amount of work to get fax working when using IAXmodem and HylaFAX would do it without the headache, most likely. Does IAXmodem allows you to receive faxes with any extensions (auto-detecting incoming faxes). JY ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Digium TE405P with French E1 = Red Alert
Hi what is your operator? I have some pb on orange... thx Noc Phibee a écrit : Hi anyone have a idea for debug my digium TE405P card ? My zaptel.conf: span=1,1,0,ccs,hdb3 bchan=1-15,17-31 dchan=16 loadzone= fr defaultzone = fr My Zapata.conf: [channels] language=fr context=from-E1 switchtype = euroisdn pridialplan = unknown signalling = pri_cpe usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes echocancel=yes immediate=no amaflags=documentation musiconhold=default group=1 callgroup=1 pickupgroup=1 channel = 1-15 channel = 17-31 a ztcfg -vv: Zaptel Configuration == SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: Clear channel (Default) (Slaves: 01) Channel 02: Clear channel (Default) (Slaves: 02) Channel 03: Clear channel (Default) (Slaves: 03) Channel 04: Clear channel (Default) (Slaves: 04) Channel 05: Clear channel (Default) (Slaves: 05) Channel 06: Clear channel (Default) (Slaves: 06) Channel 07: Clear channel (Default) (Slaves: 07) Channel 08: Clear channel (Default) (Slaves: 08) Channel 09: Clear channel (Default) (Slaves: 09) Channel 10: Clear channel (Default) (Slaves: 10) Channel 11: Clear channel (Default) (Slaves: 11) Channel 12: Clear channel (Default) (Slaves: 12) Channel 13: Clear channel (Default) (Slaves: 13) Channel 14: Clear channel (Default) (Slaves: 14) Channel 15: Clear channel (Default) (Slaves: 15) Channel 16: D-channel (Default) (Slaves: 16) Channel 17: Clear channel (Default) (Slaves: 17) Channel 18: Clear channel (Default) (Slaves: 18) Channel 19: Clear channel (Default) (Slaves: 19) Channel 20: Clear channel (Default) (Slaves: 20) Channel 21: Clear channel (Default) (Slaves: 21) Channel 22: Clear channel (Default) (Slaves: 22) Channel 23: Clear channel (Default) (Slaves: 23) Channel 24: Clear channel (Default) (Slaves: 24) Channel 25: Clear channel (Default) (Slaves: 25) Channel 26: Clear channel (Default) (Slaves: 26) Channel 27: Clear channel (Default) (Slaves: 27) Channel 28: Clear channel (Default) (Slaves: 28) Channel 29: Clear channel (Default) (Slaves: 29) Channel 30: Clear channel (Default) (Slaves: 30) Channel 31: Clear channel (Default) (Slaves: 31) 31 channels configured. but with all test, i have a red alert: ipbx*CLI zap show status Description Alarms IRQ bpviol CRC4 T4XXP (PCI) Card 0 Span 1RED0 0 0 T4XXP (PCI) Card 0 Span 2UNCONFIGUR 0 0 0 T4XXP (PCI) Card 0 Span 3UNCONFIGUR 0 0 0 T4XXP (PCI) Card 0 Span 4UNCONFIGUR 0 0 0 ipbx*CLI i use a crossover cable: 1=4 2=5 4=1 5=2 to my PRI supplier My syslog: Dec 18 12:46:39 ipbx kernel: Zaptel Version: 1.2.9.1-1mdv2007.0 Echo Canceller: KB1 Dec 18 12:46:39 ipbx zaptel: Loading zaptel framework: succeeded Dec 18 12:46:39 ipbx kernel: ACPI: PCI Interrupt :00:05.0[A] - GSI 24 (level, low) - IRQ 24 Dec 18 12:46:39 ipbx kernel: Found TE4XXP at base address febffc00, remapped to f8afec00 Dec 18 12:46:39 ipbx kernel: TE4XXP version c01a016a, burst OFF, slip debug: OFF Dec 18 12:46:39 ipbx kernel: FALC version: 0005, Board ID: 00 Dec 18 12:46:39 ipbx kernel: Reg 0: 0x186ec400 Dec 18 12:46:39 ipbx kernel: Reg 1: 0x186ec000 Dec 18 12:46:39 ipbx kernel: Reg 2: 0x Dec 18 12:46:39 ipbx kernel: Reg 3: 0x Dec 18 12:46:39 ipbx kernel: Reg 4: 0x Dec 18 12:46:39 ipbx kernel: Reg 5: 0x Dec 18 12:46:39 ipbx kernel: Reg 6: 0xc01a016a Dec 18 12:46:39 ipbx kernel: Reg 7: 0x1000 Dec 18 12:46:39 ipbx kernel: Reg 8: 0x010200ff Dec 18 12:46:39 ipbx kernel: Reg 9: 0x00fd Dec 18 12:46:39 ipbx kernel: Reg 10: 0x Dec 18 12:46:39 ipbx kernel: TE4XXP: Launching card: 0 Dec 18 12:46:39 ipbx kernel: TE4XXP: Setting up global serial parameters Dec 18 12:46:39 ipbx kernel: Successfully initialized serial bus for unit 0 Dec 18 12:46:39 ipbx kernel: Successfully initialized serial bus for unit 1 Dec 18 12:46:39 ipbx kernel: Successfully initialized serial bus for unit 2 Dec 18 12:46:39 ipbx kernel: Successfully initialized serial bus for unit 3 Dec 18 12:46:39 ipbx kernel: Found a Wildcard: Wildcard TE405P (3rd Gen) Dec 18 12:46:40 ipbx kernel: About to enter spanconfig! Dec 18 12:46:40 ipbx kernel: TE4XXP: Configuring span 1 Dec 18 12:46:40 ipbx kernel: Done with spanconfig! Dec 18 12:46:40 ipbx kernel: TE4XXP: Configured channel 1 (TE4/0/1/1) sigtype 128 Dec 18 12:46:40 ipbx kernel: Unassigning channel 0/1! Dec 18 12:46:40 ipbx kernel: TE4XXP: Configured channel 2 (TE4/0/1/2) sigtype 128 Dec 18 12:46:40 ipbx kernel: Unassigning channel 0/2! Dec 18 12:46:40 ipbx kernel: TE4XXP: Configured channel 3 (TE4/0/1/3) sigtype 128 Dec 18 12:46:40 ipbx kernel: Unassigning channel 0/3! Dec 18 12:46:40 ipbx kernel: TE4XXP: