Thanks for your reply.
The cisco router is 2650xm
with the following
===
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IS-M), Version 12.2(15)ZJ3, EARLY
DEPLOYMENT RELE
ASE SOFTWARE (fc2)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Fri 26-Sep-03 02:05 by eaarmas
Image text-base: 0x80008098, data-base: 0x81ADBC0C
ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)
ROM: C2600 Software (C2600-IS-M), Version 12.2(15)ZJ3, EARLY DEPLOYMENT
RELEASE
SOFTWARE (fc2)
Yalko-Thess uptime is 11 weeks, 3 hours, 1 minute
System returned to ROM by reload
System restarted at 10:52:42 UTC Mon Aug 16 2004
System image file is flash:c2600-is-mz.122-15.ZJ3.bin
cisco 2650XM (MPC860P) processor (revision 0x200) with 125952K/5120K
bytes of me
mory.
Processor board ID JAE080102SE (2906160658)
M860 processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.1.
1 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
3 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
==
it has a VIC 2BRI-ISDN interface (NT/TE)
which connects to the PBX which is
a Bosch Tenovis Integral 33EW2 EuroISDN.
We use already another similar cisco at another
office via a WAN link to transfer data and voice
channels between the two PBX's (same).
I made some changes to experiment with
SIP as the hardware already exists.
I somewhere red that my version of Cisco IOS
cannot handle the INVITE command according
to RFC's.
You can see a previous mail with the same
header which has the configuration
and the SIP transaction.
I have already got the 12.3(9)
and I will flash it in the first occasion
and see if it corrects. In the meantime
by playing a line of a small audio
like transfer, does the trick and fools
the cisco and works correctly.
Thanks, and if you got any clues
by my configs I would greatly
appreciate it.
Savas Pavlidis
Henry Devito wrote:
We need a little more info such as type of PBX, how it connected to
Router type, IOS version, Router config, and at least your extensions.conf.
I have setup several * using different Cisco routers and PBX's and not had
any problems. I have a lab where I can setup your config with *.
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
