RE: [Asterisk-Users] Nortel Meridian Option81C to TE405P
Yes, I have other PRIs. problem is that there are 100 different fields to fill in on the M1, but only 20 on the zap/asterisk side! I was able to get this going.Afewpoints: 1. I am using the Sangoma Card - works great. 2. I have the M1 set for USR and the Asterisk set for NET 3. The D-Channel messages on the Asterisk side are generated by the Asterisk application (in hindsight - duh!). The d-channel won't come up unless the application is running. I had the clocking on the M1 set for "External" on the ADAN / D-Channel. The clocking on the Sangoma has two choices: "Master" and "Normal". I picked "Master" because I figured the M1 would be the "Slave" from a clocking standpoint. This generated a ton of errors and took me a long time to figure out. (Why the hell can't Nortel give you an inline description of an error message?After all of these years, you still get DTA0021 as an error message!) I changed the clock on the Sangoma to Normal and the span came right up. I may have also had a physical layer problem - maybe a bad DB15 to RJ48 converter. Now I'm in dial plan and MeetMe hell - but I'll get by that too! From: Joe Pukepail [mailto:[EMAIL PROTECTED] Sent: Thursday, December 08, 2005 9:44 PMTo: Schochet, WesSubject: Re: [Asterisk-Users] Nortel Meridian Option81C to TE405P yup, is this the only PRI you have coming into your nortel? we already had 2 other PRI's coming in so pretty much just copied the config settings from one of the other PRIs. What does it show if you stat the d-channel. (I think it is in load 96: stat dch d channel number). Everything else setup on the nortel? Have a clock source setup and everything? On 12/8/05, Schochet, Wes [EMAIL PROTECTED] wrote: Joe, are you running PRI to your Opt 11? I have a 61 and I can;t get my d-channel to come up to save my life! From: Joe Pukepail [mailto:[EMAIL PROTECTED]] Sent: Thursday, December 08, 2005 9:21 AM To: Asterisk Users Mailing List - Non-Commercial DiscussionSubject: Re: [Asterisk-Users] Nortel Meridian Option81C to TE405P You can't use a ethernet crossover cable, make sure you are using a T1 crossover cable. (you will definately need to use a T1 crossover cable). I'm running a Nortel Option 11 and Asterisk connected in this manner. On 12/8/05, Steve Totaro [EMAIL PROTECTED] wrote: He said that he is using a crossover but for some reason I think thecrossover may be the problem.Try making a new one.Cross pin one with four and two with five.Also try a straight through cable.Your configs look fine on the asterisk side although I am not real cluefullon the Meridian.One question, was the Meridian ever hooked up to the PSTN? Thanks,Steve This might be an obvious question, but should you be using a crossover cable? Information on setting up Nortel to TDM card links can be found at: http://www.pham.org/asterisk/asterisk-meridian-a1.pdf Regards, -- Anthony Rodgers Business Systems Analyst District of North Vancouver Web: http://www.dnv.org RSS Feed: http://www.dnv.org/rss.asp On Dec 6, 2005, at 2:59 PM, Anish Basu wrote: Hi, I am having problems connecting a Nortel Meridian Option 81C PBX tomy Asterisk 1.20 server. We are using the TE405P card with onecrossover PRI T1 cable connecting the two systems. The lights on the back of the TE405P are green and zttool shows that the span is okay. Calls cannot be made and 'pri show span 1' shows the d-channel as down. If anyone has any experience with this, suggestions and tips are greatly appreciatd. If wecannot get this resolved within the next few days, we are willing to pay consulting fees for help. The config files are as listed below. Thanks forany help in advance. zaptel.conf --- loadzone = us defaultzone=us span=1,0,0,esf,b8zs bchan=1-23 dchan=24 zapata.conf --- [trunkgroups] [channels] language=en switchtype=5ess context=from-pbx signalling=pri_net group=1 callgroup=1 pickupgroup=1 channel = 1-23 usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 faxdetect=both musiconhold=default Nortel configuration: b-channel,d-channel, and route data block --- REQ prt TYPE adan dch 10 ADAN DCH 10 CTYP MSDL GRP 3 DNUM 2 PORT 0 DES VresaBridge USR PRI DCHL 101 OTBF 32 PARM RS422 DTE DRAT 64KC CLOK EXT IFC ESS5 SIDE USR CNEG 1 RLS ID 1 RCAP ND2 MBGA NO OVLR NO OVLS NO T200 3
RE: [Asterisk-Users] Nortel Meridian Option81C to TE405P
He said that he is using a crossover but for some reason I think the crossover may be the problem. Try making a new one. Cross pin one with four and two with five. Also try a straight through cable. Your configs look fine on the asterisk side although I am not real cluefull on the Meridian. One question, was the Meridian ever hooked up to the PSTN? Thanks, Steve This might be an obvious question, but should you be using a crossover cable? Information on setting up Nortel to TDM card links can be found at: http://www.pham.org/asterisk/asterisk-meridian-a1.pdf Regards, -- Anthony Rodgers Business Systems Analyst District of North Vancouver Web: http://www.dnv.org RSS Feed: http://www.dnv.org/rss.asp On Dec 6, 2005, at 2:59 PM, Anish Basu wrote: Hi, I am having problems connecting a Nortel Meridian Option 81C PBX to my Asterisk 1.20 server. We are using the TE405P card with one crossover PRI T1 cable connecting the two systems. The lights on the back of the TE405P are green and zttool shows that the span is okay. Calls cannot be made and 'pri show span 1' shows the d-channel as down. If anyone has any experience with this, suggestions and tips are greatly appreciatd. If we cannot get this resolved within the next few days, we are willing to pay consulting fees for help. The config files are as listed below. Thanks for any help in advance. zaptel.conf --- loadzone = us defaultzone=us span=1,0,0,esf,b8zs bchan=1-23 dchan=24 zapata.conf --- [trunkgroups] [channels] language=en switchtype=5ess context=from-pbx signalling=pri_net group=1 callgroup=1 pickupgroup=1 channel = 1-23 usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 faxdetect=both musiconhold=default Nortel configuration: b-channel,d-channel, and route data block --- REQ prt TYPE adan dch 10 ADAN DCH 10 CTYP MSDL GRP 3 DNUM 2 PORT 0 DES VresaBridge USR PRI DCHL 101 OTBF 32 PARM RS422 DTE DRAT 64KC CLOK EXT IFC ESS5 SIDE USR CNEG 1 RLS ID 1 RCAP ND2 MBGA NO OVLR NO OVLS NO T200 3 T203 10 N200 3 N201 260 K 7 ROUT 1 TYPE RDB CUST 00 ROUT 1 DES VERSA TKTP TIE NPID_TBL_NUM 0 ESN NO CNVT NO SAT NO RCLS EXT VTRK NO DTRK YES BRIP NO DGTP PRI ISDN YES MODE PRA IFC ESS5 SBN NO PNI 1 SRVC NNSF NCNA YES NCRD YES CHTY BCH CTYP UKWN INAC YES ISAR NO CPUB OFF DAPC NO BCOT 0 DSEL VOD PTYP PRI AUTO NO DNIS NO DCDR NO ICOG IAO SRCH LIN TRMB YES STEP ACOD 8901 TCPP NO PII NO TARG 01 CLEN 1 BILN NO OABS INST IDC NO DCNO 0 * NDNO 0 DEXT NO ANTK SIGO STD ICIS YES TIMR ICF 512 OGF 512 EOD 13952 NRD 10112 DDL 70 ODT 4096 RGV 640 GRD 896 SFB 3 NBS 2048 PAGE 002 NBL 4096 IENB 5 TFD 0 VSS 0 VGD 6 DRNG NO CDR NO VRAT NO MUS NO RACD NO FRL 0 0 FRL 1 0 FRL 2 0 FRL 3 0 FRL 4 0 FRL 5 0 FRL 6 0 FRL 7 0 OHQ NO OHQT 00 CBQ NO AUTH NO TDET NO TTBL 0 ATAN NO PLEV 2 ALRM NO ART 0 SGRP 0 AACR NO DES VERSA TN 101 01 TYPE TIE CDEN SD CUST 0 TRK PRI PDCA 1 PCML MU NCOS 0 RTMB 1 73 B-CHANNEL SIGNALING TGAR 1 AST NO IAPG 0 CLS UNR DTN WTA LPR APN THFD HKD P10 VNL TKID DATE 5 DEC 2005 Anish Basu Field Systems Engineer Softel, Inc. Phone: (732) 705-9202 Cell: (732) 312-6634 ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Nortel Meridian Option81C to TE405P
If the digium card is good then he has the proper cable config, although his send may not be getting to the nortel. This is layer one which must work before layer two, ie d channel. What does the nortel say regarding the T1? If this is good then your issue is with configuration not cableing. On Dec 8, 2005, at 9:02 AM, Steve Totaro wrote: He said that he is using a crossover but for some reason I think the crossover may be the problem. Try making a new one. Cross pin one with four and two with five. Also try a straight through cable. Your configs look fine on the asterisk side although I am not real cluefull on the Meridian. One question, was the Meridian ever hooked up to the PSTN? Thanks, Steve This might be an obvious question, but should you be using a crossover cable? Information on setting up Nortel to TDM card links can be found at: http://www.pham.org/asterisk/asterisk-meridian-a1.pdf Regards, -- Anthony Rodgers Business Systems Analyst District of North Vancouver Web: http://www.dnv.org RSS Feed: http://www.dnv.org/rss.asp On Dec 6, 2005, at 2:59 PM, Anish Basu wrote: Hi, I am having problems connecting a Nortel Meridian Option 81C PBX to my Asterisk 1.20 server. We are using the TE405P card with one crossover PRI T1 cable connecting the two systems. The lights on the back of the TE405P are green and zttool shows that the span is okay. Calls cannot be made and 'pri show span 1' shows the d-channel as down. If anyone has any experience with this, suggestions and tips are greatly appreciatd. If we cannot get this resolved within the next few days, we are willing to pay consulting fees for help. The config files are as listed below. Thanks for any help in advance. zaptel.conf --- loadzone = us defaultzone=us span=1,0,0,esf,b8zs bchan=1-23 dchan=24 zapata.conf --- [trunkgroups] [channels] language=en switchtype=5ess context=from-pbx signalling=pri_net group=1 callgroup=1 pickupgroup=1 channel = 1-23 usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 faxdetect=both musiconhold=default Nortel configuration: b-channel,d-channel, and route data block --- REQ prt TYPE adan dch 10 ADAN DCH 10 CTYP MSDL GRP 3 DNUM 2 PORT 0 DES VresaBridge USR PRI DCHL 101 OTBF 32 PARM RS422 DTE DRAT 64KC CLOK EXT IFC ESS5 SIDE USR CNEG 1 RLS ID 1 RCAP ND2 MBGA NO OVLR NO OVLS NO T200 3 T203 10 N200 3 N201 260 K7 ROUT 1 TYPE RDB CUST 00 ROUT 1 DES VERSA TKTP TIE NPID_TBL_NUM 0 ESN NO CNVT NO SAT NO RCLS EXT VTRK NO DTRK YES BRIP NO DGTP PRI ISDN YES MODE PRA IFC ESS5 SBN NO PNI 1 SRVC NNSF NCNA YES NCRD YES CHTY BCH CTYP UKWN INAC YES ISAR NO CPUB OFF DAPC NO BCOT 0 DSEL VOD PTYP PRI AUTO NO DNIS NO DCDR NO ICOG IAO SRCH LIN TRMB YES STEP ACOD 8901 TCPP NO PII NO TARG 01 CLEN 1 BILN NO OABS INST IDC NO DCNO 0 * NDNO 0 DEXT NO ANTK SIGO STD ICIS YES TIMR ICF 512 OGF 512 EOD 13952 NRD 10112 DDL 70 ODT 4096 RGV 640 GRD 896 SFB 3 NBS 2048 PAGE 002 NBL 4096 IENB 5 TFD 0 VSS 0 VGD 6 DRNG NO CDR NO VRAT NO MUS NO RACD NO FRL 0 0 FRL 1 0 FRL 2 0 FRL 3 0 FRL 4 0 FRL 5 0 FRL 6 0 FRL 7 0 OHQ NO OHQT 00 CBQ NO AUTH NO TDET NO TTBL 0 ATAN NO PLEV 2 ALRM NO ART 0 SGRP 0 AACR NO DES VERSA TN 101 01 TYPE TIE CDEN SD CUST 0 TRK PRI PDCA 1 PCML MU NCOS 0 RTMB 1 73 B-CHANNEL SIGNALING TGAR 1 AST NO IAPG 0 CLS UNR DTN WTA LPR APN THFD HKD P10 VNL TKID DATE 5 DEC 2005 Anish Basu Field Systems Engineer Softel, Inc. Phone: (732) 705-9202 Cell: (732) 312-6634 ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Nortel Meridian Option81C to TE405P
You can't use a ethernet crossover cable, make sure you are using a T1 crossover cable. (you will definately need to use a T1 crossover cable). I'm running a Nortel Option 11 and Asterisk connected in this manner. On 12/8/05, Steve Totaro [EMAIL PROTECTED] wrote: He said that he is using a crossover but for some reason I think thecrossover may be the problem.Try making a new one.Cross pin one with four and two with five.Also try a straight through cable.Yourconfigs look fine on the asterisk side although I am not real cluefullon the Meridian.One question, was the Meridian ever hooked up to the PSTN? Thanks,Steve This might be an obvious question, but should you be using a crossover cable? Information on setting up Nortel to TDM card links can be found at: http://www.pham.org/asterisk/asterisk-meridian-a1.pdf Regards, -- Anthony Rodgers Business Systems Analyst District of North Vancouver Web: http://www.dnv.org RSS Feed: http://www.dnv.org/rss.asp On Dec 6, 2005, at 2:59 PM, Anish Basu wrote: Hi, I am having problems connecting a Nortel Meridian Option 81C PBX tomy Asterisk 1.20 server. We are using the TE405P card with onecrossover PRI T1 cable connecting the two systems. The lights on the back of the TE405P are green and zttool shows that the span is okay. Calls cannot be made and 'pri show span 1' shows the d-channel as down. If anyone has any experience with this, suggestions and tips are greatly appreciatd. If wecannot get this resolved within the next few days, we are willing to pay consulting fees for help. The config files are as listed below. Thanks forany help in advance.zaptel.conf --- loadzone = us defaultzone=us span=1,0,0,esf,b8zs bchan=1-23 dchan=24 zapata.conf --- [trunkgroups] [channels] language=en switchtype=5ess context=from-pbx signalling=pri_net group=1 callgroup=1 pickupgroup=1 channel = 1-23 usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 faxdetect=both musiconhold=default Nortel configuration: b-channel,d-channel, and route data block --- REQ prt TYPE adan dch 10 ADAN DCH 10 CTYP MSDL GRP 3 DNUM 2 PORT 0 DES VresaBridge USR PRI DCHL 101 OTBF 32 PARM RS422 DTE DRAT 64KC CLOK EXT IFC ESS5 SIDE USR CNEG 1 RLS ID 1 RCAP ND2 MBGA NO OVLR NO OVLS NO T200 3 T203 10 N200 3 N201 260 K 7ROUT 1 TYPE RDB CUST 00 ROUT 1 DES VERSA TKTP TIE NPID_TBL_NUM 0 ESN NO CNVT NO SAT NO RCLS EXT VTRK NO DTRK YES BRIP NO DGTP PRI ISDN YES MODE PRA IFC ESS5 SBN NO PNI 1 SRVC NNSF NCNA YES NCRD YES CHTY BCH CTYP UKWN INAC YES ISAR NO CPUB OFF DAPC NO BCOT 0 DSEL VOD PTYP PRI AUTO NO DNIS NO DCDR NO ICOG IAO SRCH LIN TRMB YES STEP ACOD 8901 TCPP NO PII NO TARG 01 CLEN 1 BILN NO OABS INST IDC NO DCNO 0 * NDNO 0 DEXT NO ANTK SIGO STD ICIS YES TIMR ICF 512 OGF 512 EOD 13952 NRD 10112 DDL 70 ODT 4096 RGV 640 GRD 896 SFB 3 NBS 2048PAGE 002 NBL 4096 IENB 5 TFD 0 VSS 0 VGD 6 DRNG NO CDR NO VRAT NO MUS NO RACD NO FRL 0 0 FRL 1 0 FRL 2 0 FRL 3 0 FRL 4 0 FRL 5 0 FRL 6 0 FRL 7 0 OHQ NO OHQT 00 CBQ NO AUTH NO TDET NO TTBL 0 ATAN NO PLEV 2 ALRM NO ART 0 SGRP 0 AACR NO DES VERSA TN 101 01 TYPE TIE CDEN SD CUST 0 TRK PRI PDCA 1 PCML MU NCOS 0 RTMB 1 73 B-CHANNEL SIGNALING TGAR 1 AST NO IAPG 0 CLS UNR DTN WTA LPR APN THFD HKD P10 VNL TKID DATE 5 DEC 2005 Anish Basu Field Systems Engineer Softel, Inc. Phone: (732) 705-9202 Cell: (732) 312-6634 ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit:http://lists.digium.com/mailman/listinfo/asterisk-users ___--Bandwidth and Colocation provided by Easynews.com --Asterisk-Users mailing listTo UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Nortel Meridian Option81C to TE405P
Cabling is always the first thing to check in these types of issues. Sure, he may need a T1 crossover but maybe the cable was made incorrectly or the connections are not crimped well. Just because someone says they have a crossover cable does not mean that it is OK. Again, check the cable (physical layer one) Thanks, Steve If the digium card is good then he has the proper cable config, although his send may not be getting to the nortel. This is layer one which must work before layer two, ie d channel. What does the nortel say regarding the T1? If this is good then your issue is with configuration not cableing. On Dec 8, 2005, at 9:02 AM, Steve Totaro wrote: He said that he is using a crossover but for some reason I think the crossover may be the problem. Try making a new one. Cross pin one with four and two with five. Also try a straight through cable. Your configs look fine on the asterisk side although I am not real cluefull on the Meridian. One question, was the Meridian ever hooked up to the PSTN? Thanks, Steve This might be an obvious question, but should you be using a crossover cable? Information on setting up Nortel to TDM card links can be found at: http://www.pham.org/asterisk/asterisk-meridian-a1.pdf Regards, -- Anthony Rodgers Business Systems Analyst District of North Vancouver Web: http://www.dnv.org RSS Feed: http://www.dnv.org/rss.asp On Dec 6, 2005, at 2:59 PM, Anish Basu wrote: Hi, I am having problems connecting a Nortel Meridian Option 81C PBX to my Asterisk 1.20 server. We are using the TE405P card with one crossover PRI T1 cable connecting the two systems. The lights on the back of the TE405P are green and zttool shows that the span is okay. Calls cannot be made and 'pri show span 1' shows the d-channel as down. If anyone has any experience with this, suggestions and tips are greatly appreciatd. If we cannot get this resolved within the next few days, we are willing to pay consulting fees for help. The config files are as listed below. Thanks for any help in advance. zaptel.conf --- loadzone = us defaultzone=us span=1,0,0,esf,b8zs bchan=1-23 dchan=24 zapata.conf --- [trunkgroups] [channels] language=en switchtype=5ess context=from-pbx signalling=pri_net group=1 callgroup=1 pickupgroup=1 channel = 1-23 usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 faxdetect=both musiconhold=default Nortel configuration: b-channel,d-channel, and route data block --- REQ prt TYPE adan dch 10 ADAN DCH 10 CTYP MSDL GRP 3 DNUM 2 PORT 0 DES VresaBridge USR PRI DCHL 101 OTBF 32 PARM RS422 DTE DRAT 64KC CLOK EXT IFC ESS5 SIDE USR CNEG 1 RLS ID 1 RCAP ND2 MBGA NO OVLR NO OVLS NO T200 3 T203 10 N200 3 N201 260 K7 ROUT 1 TYPE RDB CUST 00 ROUT 1 DES VERSA TKTP TIE NPID_TBL_NUM 0 ESN NO CNVT NO SAT NO RCLS EXT VTRK NO DTRK YES BRIP NO DGTP PRI ISDN YES MODE PRA IFC ESS5 SBN NO PNI 1 SRVC NNSF NCNA YES NCRD YES CHTY BCH CTYP UKWN INAC YES ISAR NO CPUB OFF DAPC NO BCOT 0 DSEL VOD PTYP PRI AUTO NO DNIS NO DCDR NO ICOG IAO SRCH LIN TRMB YES STEP ACOD 8901 TCPP NO PII NO TARG 01 CLEN 1 BILN NO OABS INST IDC NO DCNO 0 * NDNO 0 DEXT NO ANTK SIGO STD ICIS YES TIMR ICF 512 OGF 512 EOD 13952 NRD 10112 DDL 70 ODT 4096 RGV 640 GRD 896 SFB 3 NBS 2048 PAGE 002 NBL 4096 IENB 5 TFD 0 VSS 0 VGD 6 DRNG NO CDR NO VRAT NO MUS NO RACD NO FRL 0 0 FRL 1 0 FRL 2 0 FRL 3 0 FRL 4 0 FRL 5 0 FRL 6 0 FRL 7 0 OHQ NO OHQT 00 CBQ NO AUTH NO TDET NO TTBL 0 ATAN NO PLEV 2 ALRM NO ART 0 SGRP 0 AACR NO DES VERSA TN 101 01 TYPE TIE CDEN SD CUST 0 TRK PRI PDCA 1 PCML MU NCOS 0 RTMB 1 73 B-CHANNEL SIGNALING TGAR 1 AST NO IAPG 0 CLS UNR DTN WTA LPR APN THFD HKD P10 VNL TKID DATE 5 DEC 2005 Anish Basu Field Systems Engineer Softel, Inc. Phone: (732) 705-9202 Cell: (732) 312-6634 ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Nortel Meridian Option81C to TE405P
Yes, that is why I said cross pins one with four and two with five (a T1 crossover cable configuration) You can't use a ethernet crossover cable, make sure you are using a T1 crossover cable. (you will definately need to use a T1 crossover cable). I'm running a Nortel Option 11 and Asterisk connected in this manner. On 12/8/05, Steve Totaro [EMAIL PROTECTED] wrote: He said that he is using a crossover but for some reason I think the crossover may be the problem. Try making a new one. Cross pin one with four and two with five. Also try a straight through cable. Your configs look fine on the asterisk side although I am not real cluefull on the Meridian. One question, was the Meridian ever hooked up to the PSTN? Thanks, Steve This might be an obvious question, but should you be using a crossover cable? Information on setting up Nortel to TDM card links can be found at: http://www.pham.org/asterisk/asterisk-meridian-a1.pdf Regards, -- Anthony Rodgers Business Systems Analyst District of North Vancouver Web: http://www.dnv.org RSS Feed: http://www.dnv.org/rss.asp On Dec 6, 2005, at 2:59 PM, Anish Basu wrote: Hi, I am having problems connecting a Nortel Meridian Option 81C PBX to my Asterisk 1.20 server. We are using the TE405P card with one crossover PRI T1 cable connecting the two systems. The lights on the back of the TE405P are green and zttool shows that the span is okay. Calls cannot be made and 'pri show span 1' shows the d-channel as down. If anyone has any experience with this, suggestions and tips are greatly appreciatd. If we cannot get this resolved within the next few days, we are willing to pay consulting fees for help. The config files are as listed below. Thanks for any help in advance. zaptel.conf --- loadzone = us defaultzone=us span=1,0,0,esf,b8zs bchan=1-23 dchan=24 zapata.conf --- [trunkgroups] [channels] language=en switchtype=5ess context=from-pbx signalling=pri_net group=1 callgroup=1 pickupgroup=1 channel = 1-23 usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 faxdetect=both musiconhold=default Nortel configuration: b-channel,d-channel, and route data block --- REQ prt TYPE adan dch 10 ADAN DCH 10 CTYP MSDL GRP 3 DNUM 2 PORT 0 DES VresaBridge USR PRI DCHL 101 OTBF 32 PARM RS422 DTE DRAT 64KC CLOK EXT IFC ESS5 SIDE USR CNEG 1 RLS ID 1 RCAP ND2 MBGA NO OVLR NO OVLS NO T200 3 T203 10 N200 3 N201 260 K 7 ROUT 1 TYPE RDB CUST 00 ROUT 1 DES VERSA TKTP TIE NPID_TBL_NUM 0 ESN NO CNVT NO SAT NO RCLS EXT VTRK NO DTRK YES BRIP NO DGTP PRI ISDN YES MODE PRA IFC ESS5 SBN NO PNI 1 SRVC NNSF NCNA YES NCRD YES CHTY BCH CTYP UKWN INAC YES ISAR NO CPUB OFF DAPC NO BCOT 0 DSEL VOD PTYP PRI AUTO NO DNIS NO DCDR NO ICOG IAO SRCH LIN TRMB YES STEP ACOD 8901 TCPP NO PII NO TARG 01 CLEN 1 BILN NO OABS INST IDC NO DCNO 0 * NDNO 0 DEXT NO ANTK SIGO STD ICIS YES TIMR ICF 512 OGF 512 EOD 13952 NRD 10112 DDL 70 ODT 4096 RGV 640 GRD 896 SFB 3 NBS 2048 PAGE 002 NBL 4096 IENB 5 TFD 0 VSS 0 VGD 6 DRNG NO CDR NO VRAT NO MUS NO RACD
RE: [Asterisk-Users] Nortel Meridian Option81C to TE405P
Joe, are you running PRI to your Opt 11? I have a 61 and I can;t get my d-channel to come up to save my life! From: Joe Pukepail [mailto:[EMAIL PROTECTED] Sent: Thursday, December 08, 2005 9:21 AMTo: Asterisk Users Mailing List - Non-Commercial DiscussionSubject: Re: [Asterisk-Users] Nortel Meridian Option81C to TE405P You can't use a ethernet crossover cable, make sure you are using a T1 crossover cable. (you will definately need to use a T1 crossover cable). I'm running a Nortel Option 11 and Asterisk connected in this manner. On 12/8/05, Steve Totaro [EMAIL PROTECTED] wrote: He said that he is using a crossover but for some reason I think thecrossover may be the problem.Try making a new one.Cross pin one with four and two with five.Also try a straight through cable.Yourconfigs look fine on the asterisk side although I am not real cluefullon the Meridian.One question, was the Meridian ever hooked up to the PSTN? Thanks,Steve This might be an obvious question, but should you be using a crossover cable? Information on setting up Nortel to TDM card links can be found at: http://www.pham.org/asterisk/asterisk-meridian-a1.pdf Regards, -- Anthony Rodgers Business Systems Analyst District of North Vancouver Web: http://www.dnv.org RSS Feed: http://www.dnv.org/rss.asp On Dec 6, 2005, at 2:59 PM, Anish Basu wrote: Hi, I am having problems connecting a Nortel Meridian Option 81C PBX tomy Asterisk 1.20 server. We are using the TE405P card with onecrossover PRI T1 cable connecting the two systems. The lights on the back of the TE405P are green and zttool shows that the span is okay. Calls cannot be made and 'pri show span 1' shows the d-channel as down. If anyone has any experience with this, suggestions and tips are greatly appreciatd. If wecannot get this resolved within the next few days, we are willing to pay consulting fees for help. The config files are as listed below. Thanks forany help in advance. zaptel.conf --- loadzone = us defaultzone=us span=1,0,0,esf,b8zs bchan=1-23 dchan=24 zapata.conf --- [trunkgroups] [channels] language=en switchtype=5ess context=from-pbx signalling=pri_net group=1 callgroup=1 pickupgroup=1 channel = 1-23 usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 faxdetect=both musiconhold=default Nortel configuration: b-channel,d-channel, and route data block --- REQ prt TYPE adan dch 10 ADAN DCH 10 CTYP MSDL GRP 3 DNUM 2 PORT 0 DES VresaBridge USR PRI DCHL 101 OTBF 32 PARM RS422 DTE DRAT 64KC CLOK EXT IFC ESS5 SIDE USR CNEG 1 RLS ID 1 RCAP ND2 MBGA NO OVLR NO OVLS NO T200 3 T203 10 N200 3 N201 260 K 7 ROUT 1 TYPE RDB CUST 00 ROUT 1 DES VERSA TKTP TIE NPID_TBL_NUM 0 ESN NO CNVT NO SAT NO RCLS EXT VTRK NO DTRK YES BRIP NO DGTP PRI ISDN YES MODE PRA IFC ESS5 SBN NO PNI 1 SRVC NNSF NCNA YES NCRD YES CHTY BCH CTYP UKWN INAC YES ISAR NO CPUB OFF DAPC NO BCOT 0 DSEL VOD PTYP PRI AUTO NO DNIS NO DCDR NO ICOG IAO SRCH LIN TRMB YES STEP ACOD 8901 TCPP NO PII NO TARG 01 CLEN 1 BILN NO OABS INST IDC NO DCNO 0 * NDNO 0 DEXT NO ANTK SIGO STD ICIS YES TIMR ICF 512 OGF 512 EOD 13952 NRD 10112 DDL 70 ODT 4096 RGV 640 GRD 896 SFB 3 NBS 2048 PAGE 002 NBL 4096 IENB 5 TFD 0 VSS 0 VGD 6 DRNG NO CDR NO VRAT NO MUS NO RACD NO FRL 0 0 FRL 1 0 FRL 2 0 FRL 3 0 FRL 4 0 FRL 5 0 FRL 6 0 FRL 7 0 OHQ NO OHQT 00 CBQ NO AUTH NO TDET NO TTBL 0 ATAN NO PLEV 2 ALRM NO ART 0 SGRP 0 AACR NO DES VERSA TN 101 01 TYPE TIE CDEN SD CUST 0 TRK PRI PDCA 1 PCML MU NCOS 0 RTMB 1 73 B-CHANNEL SIGNALING TGAR 1 AST NO IAPG 0 CLS UNR DTN WTA LPR APN THFD HKD P10 VNL TKID DATE 5 DEC 2005 Anish Basu Field Systems Engineer Softel, Inc. Phone: (732) 705-9202 Cell: (732) 312-6634 ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit:http://lists.digium.com/mailman/listinfo/asterisk-users ___--Bandwidth and Colocation provided by Easynews.com --Asterisk-Users mailing listTo UNSUBSCRIBE
Re: [Asterisk-Users] Nortel Meridian Option81C to TE405P
This might be an obvious question, but should you be using a crossover cable? Information on setting up Nortel to TDM card links can be found at: http://www.pham.org/asterisk/asterisk-meridian-a1.pdf Regards, -- Anthony Rodgers Business Systems Analyst District of North Vancouver Web: http://www.dnv.org RSS Feed: http://www.dnv.org/rss.asp On Dec 6, 2005, at 2:59 PM, Anish Basu wrote: Hi, I am having problems connecting a Nortel Meridian Option 81C PBX to my Asterisk 1.20 server. We are using the TE405P card with one crossover PRI T1 cable connecting the two systems. The lights on the back of the TE405P are green and zttool shows that the span is okay. Calls cannot be made and 'pri show span 1' shows the d-channel as down. If anyone has any experience with this, suggestions and tips are greatly appreciatd. If we cannot get this resolved within the next few days, we are willing to pay consulting fees for help. The config files are as listed below. Thanks for any help in advance. zaptel.conf --- loadzone = us defaultzone=us span=1,0,0,esf,b8zs bchan=1-23 dchan=24 zapata.conf --- [trunkgroups] [channels] language=en switchtype=5ess context=from-pbx signalling=pri_net group=1 callgroup=1 pickupgroup=1 channel = 1-23 usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 faxdetect=both musiconhold=default Nortel configuration: b-channel,d-channel, and route data block --- REQ prt TYPE adan dch 10 ADAN DCH 10 CTYP MSDL GRP 3 DNUM 2 PORT 0 DES VresaBridge USR PRI DCHL 101 OTBF 32 PARM RS422 DTE DRAT 64KC CLOK EXT IFC ESS5 SIDE USR CNEG 1 RLS ID 1 RCAP ND2 MBGA NO OVLR NO OVLS NO T200 3 T203 10 N200 3 N201 260 K 7 ROUT 1 TYPE RDB CUST 00 ROUT 1 DES VERSA TKTP TIE NPID_TBL_NUM 0 ESN NO CNVT NO SAT NO RCLS EXT VTRK NO DTRK YES BRIP NO DGTP PRI ISDN YES MODE PRA IFC ESS5 SBN NO PNI 1 SRVC NNSF NCNA YES NCRD YES CHTY BCH CTYP UKWN INAC YES ISAR NO CPUB OFF DAPC NO BCOT 0 DSEL VOD PTYP PRI AUTO NO DNIS NO DCDR NO ICOG IAO SRCH LIN TRMB YES STEP ACOD 8901 TCPP NO PII NO TARG 01 CLEN 1 BILN NO OABS INST IDC NO DCNO 0 * NDNO 0 DEXT NO ANTK SIGO STD ICIS YES TIMR ICF 512 OGF 512 EOD 13952 NRD 10112 DDL 70 ODT 4096 RGV 640 GRD 896 SFB 3 NBS 2048 PAGE 002 NBL 4096 IENB 5 TFD 0 VSS 0 VGD 6 DRNG NO CDR NO VRAT NO MUS NO RACD NO FRL 0 0 FRL 1 0 FRL 2 0 FRL 3 0 FRL 4 0 FRL 5 0 FRL 6 0 FRL 7 0 OHQ NO OHQT 00 CBQ NO AUTH NO TDET NO TTBL 0 ATAN NO PLEV 2 ALRM NO ART 0 SGRP 0 AACR NO DES VERSA TN 101 01 TYPE TIE CDEN SD CUST 0 TRK PRI PDCA 1 PCML MU NCOS 0 RTMB 1 73 B-CHANNEL SIGNALING TGAR 1 AST NO IAPG 0 CLS UNR DTN WTA LPR APN THFD HKD P10 VNL TKID DATE 5 DEC 2005 Anish Basu Field Systems Engineer Softel, Inc. Phone: (732) 705-9202 Cell: (732) 312-6634 ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Nortel Meridian Option81C to TE405P
Can you do a ISDN message trace in LD 96 on the M1 when you try to bring up the D-Channel? LD 96 enl msgo 10 enl msgi 10 Make sure you later do a dis msgi 10 dis msgo 10 To shut it off. You should see good info there. -Original Message- From: Anthony Rodgers [mailto:[EMAIL PROTECTED] Sent: Wednesday, December 07, 2005 10:41 AM To: [EMAIL PROTECTED] Cc: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Nortel Meridian Option81C to TE405P This might be an obvious question, but should you be using a crossover cable? Information on setting up Nortel to TDM card links can be found at: http://www.pham.org/asterisk/asterisk-meridian-a1.pdf Regards, -- Anthony Rodgers Business Systems Analyst District of North Vancouver Web: http://www.dnv.org RSS Feed: http://www.dnv.org/rss.asp On Dec 6, 2005, at 2:59 PM, Anish Basu wrote: Hi, I am having problems connecting a Nortel Meridian Option 81C PBX to my Asterisk 1.20 server. We are using the TE405P card with one crossover PRI T1 cable connecting the two systems. The lights on the back of the TE405P are green and zttool shows that the span is okay. Calls cannot be made and 'pri show span 1' shows the d-channel as down. If anyone has any experience with this, suggestions and tips are greatly appreciatd. If we cannot get this resolved within the next few days, we are willing to pay consulting fees for help. The config files are as listed below. Thanks for any help in advance. zaptel.conf --- loadzone = us defaultzone=us span=1,0,0,esf,b8zs bchan=1-23 dchan=24 zapata.conf --- [trunkgroups] [channels] language=en switchtype=5ess context=from-pbx signalling=pri_net group=1 callgroup=1 pickupgroup=1 channel = 1-23 usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 faxdetect=both musiconhold=default Nortel configuration: b-channel,d-channel, and route data block --- REQ prt TYPE adan dch 10 ADAN DCH 10 CTYP MSDL GRP 3 DNUM 2 PORT 0 DES VresaBridge USR PRI DCHL 101 OTBF 32 PARM RS422 DTE DRAT 64KC CLOK EXT IFC ESS5 SIDE USR CNEG 1 RLS ID 1 RCAP ND2 MBGA NO OVLR NO OVLS NO T200 3 T203 10 N200 3 N201 260 K 7 ROUT 1 TYPE RDB CUST 00 ROUT 1 DES VERSA TKTP TIE NPID_TBL_NUM 0 ESN NO CNVT NO SAT NO RCLS EXT VTRK NO DTRK YES BRIP NO DGTP PRI ISDN YES MODE PRA IFC ESS5 SBN NO PNI 1 SRVC NNSF NCNA YES NCRD YES CHTY BCH CTYP UKWN INAC YES ISAR NO CPUB OFF DAPC NO BCOT 0 DSEL VOD PTYP PRI AUTO NO DNIS NO DCDR NO ICOG IAO SRCH LIN TRMB YES STEP ACOD 8901 TCPP NO PII NO TARG 01 CLEN 1 BILN NO OABS INST IDC NO DCNO 0 * NDNO 0 DEXT NO ANTK SIGO STD ICIS YES TIMR ICF 512 OGF 512 EOD 13952 NRD 10112 DDL 70 ODT 4096 RGV 640 GRD 896 SFB 3 NBS 2048 PAGE 002 NBL 4096 IENB 5 TFD 0 VSS 0 VGD 6 DRNG NO CDR NO VRAT NO MUS NO RACD NO FRL 0 0 FRL 1 0 FRL 2 0 FRL 3 0 FRL 4 0 FRL 5 0 FRL 6 0 FRL 7 0 OHQ NO OHQT 00 CBQ NO AUTH NO TDET NO TTBL 0 ATAN NO PLEV 2 ALRM NO ART 0 SGRP 0 AACR NO DES VERSA TN 101 01 TYPE TIE CDEN SD CUST 0 TRK PRI PDCA 1 PCML MU NCOS 0 RTMB 1 73 B-CHANNEL SIGNALING TGAR 1 AST NO IAPG 0 CLS UNR DTN WTA LPR APN THFD HKD P10 VNL TKID DATE 5 DEC 2005 Anish Basu Field Systems Engineer Softel, Inc. Phone: (732) 705-9202 Cell: (732) 312-6634 ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Nortel Meridian Option81C to TE405P
Yes, according to the document link that you provided and most other sources, a T1 crossover cable is required to connect the Nortel Meridian to an Asterisk server. Here is a summary of the important settings that I have: Nortel Meridian Asterisk Digium TE405P --- -- PRI_CPE PRI_NET Switchtype 5ess Switchtype 5ess 23B, 1D channel 23B, 1D channel ESF framing ESF framing B8ZS encoding B8ZS encoding Get clock from span Provide clock We still cannot get a connection. 'PRI SHOW SPAN 1' produces: Primary D-channel: 24 Status: Provisioned, Down, Active Switchtype: National ISDN Type: Network Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 1 T305 Timer: 3 T308 Timer: 4000 T313 Timer: 4000 N200 Counter: 3 It seems that the D-channel is down. Any other ideas or suggestions would be greatly appreciated. --Anish -Original Message- From: Anthony Rodgers [mailto:[EMAIL PROTECTED] Sent: Wednesday, December 07, 2005 11:41 AM To: [EMAIL PROTECTED]@softelinc.com Cc: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Nortel Meridian Option81C to TE405P This might be an obvious question, but should you be using a crossover cable? Information on setting up Nortel to TDM card links can be found at: http://www.pham.org/asterisk/asterisk-meridian-a1.pdf Regards, -- Anthony Rodgers Business Systems Analyst District of North Vancouver Web: http://www.dnv.org RSS Feed: http://www.dnv.org/rss.asp On Dec 6, 2005, at 2:59 PM, Anish Basu wrote: Hi, I am having problems connecting a Nortel Meridian Option 81C PBX to my Asterisk 1.20 server. We are using the TE405P card with one crossover PRI T1 cable connecting the two systems. The lights on the back of the TE405P are green and zttool shows that the span is okay. Calls cannot be made and 'pri show span 1' shows the d-channel as down. If anyone has any experience with this, suggestions and tips are greatly appreciatd. If we cannot get this resolved within the next few days, we are willing to pay consulting fees for help. The config files are as listed below. Thanks for any help in advance. zaptel.conf --- loadzone = us defaultzone=us span=1,0,0,esf,b8zs bchan=1-23 dchan=24 zapata.conf --- [trunkgroups] [channels] language=en switchtype=5ess context=from-pbx signalling=pri_net group=1 callgroup=1 pickupgroup=1 channel = 1-23 usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 faxdetect=both musiconhold=default Nortel configuration: b-channel,d-channel, and route data block --- REQ prt TYPE adan dch 10 ADAN DCH 10 CTYP MSDL GRP 3 DNUM 2 PORT 0 DES VresaBridge USR PRI DCHL 101 OTBF 32 PARM RS422 DTE DRAT 64KC CLOK EXT IFC ESS5 SIDE USR CNEG 1 RLS ID 1 RCAP ND2 MBGA NO OVLR NO OVLS NO T200 3 T203 10 N200 3 N201 260 K 7 ROUT 1 TYPE RDB CUST 00 ROUT 1 DES VERSA TKTP TIE NPID_TBL_NUM 0 ESN NO CNVT NO SAT NO RCLS EXT VTRK NO DTRK YES BRIP NO DGTP PRI ISDN YES MODE PRA IFC ESS5 SBN NO PNI 1 SRVC NNSF NCNA YES NCRD YES CHTY BCH CTYP UKWN INAC YES ISAR NO CPUB OFF DAPC NO BCOT 0 DSEL VOD PTYP PRI AUTO NO DNIS NO DCDR NO ICOG IAO SRCH LIN TRMB YES STEP ACOD 8901 TCPP NO PII NO TARG 01 CLEN 1 BILN NO OABS INST IDC NO DCNO 0 * NDNO 0 DEXT NO ANTK SIGO STD ICIS YES TIMR ICF 512 OGF 512 EOD 13952 NRD 10112 DDL 70 ODT 4096 RGV 640 GRD 896 SFB 3 NBS 2048 PAGE 002 NBL 4096 IENB 5 TFD 0 VSS 0 VGD 6 DRNG NO CDR NO VRAT NO MUS NO RACD NO FRL 0 0 FRL 1 0 FRL 2 0 FRL 3 0 FRL 4 0 FRL 5 0 FRL 6 0 FRL 7 0 OHQ NO OHQT 00 CBQ NO AUTH NO TDET NO TTBL 0 ATAN NO PLEV 2 ALRM NO ART 0 SGRP 0 AACR NO DES VERSA TN 101 01 TYPE TIE CDEN SD CUST 0 TRK PRI PDCA 1 PCML MU NCOS 0 RTMB 1 73 B-CHANNEL SIGNALING TGAR 1 AST NO IAPG 0 CLS UNR DTN WTA LPR APN THFD HKD P10 VNL TKID DATE 5 DEC 2005 Anish Basu Field Systems Engineer Softel, Inc. Phone: (732) 705-9202 Cell: (732) 312-6634 ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http