If you have iax.conf on /etc/asterisk, the iax configuration will be
loaded from there and not from what is specified in the realtime config.
Remove the iax.conf file if you haven't already.
Bruce Komito
High Sierra Networks, Inc.
www.servers-r-us.com
(775) 236-5815
On Tue, 14 Dec 2004, Jason
Hello,
Based on the behavior I have seen, the IAX.conf file
is necessary, as it is still picking up the [general]
section and registeration commands from there. If I
remove that, how does one add the general settings and
register commands to the realtime database?
All I have removed from the
I assume we are both talking about the static realtime settings, right?
I can't testify to the behaviour of realtime iax, but I know if you have
sip.conf or extensions.conf in the * directory, those values will not be
loaded from realtime. To answer your question about how to specify
[general]
Brian Wilkins wrote:
So why not allow qualify=yes under the general heading for sip and iax?
That's not the issue :-)
The issue is that the thread that sends qualify messages has to have a
list of peers to send them to, and it works off of the peer list that
the channel driver keeps in memory.
qualify= and mailbox= do not work with the realtime
configuration engine. It doesn't matter if you specify
them in the database, the thread that handles them
will never look at the peers you have defined in the
database, only the ones defined in iax.conf.
---
Thank you.
So why not allow qualify=yes under the general heading for sip and iax?
On Tuesday 14 December 2004 03:32 pm, Kevin P. Fleming wrote:
Jason Goecke wrote:
While most of IAX peers are working for
inbound/outbound, Voicepulse is not (requires the
'qualify' field set to yes). Not sure if this
Hello,
Right now there is not a table build script at:
http://www.voip-info.org/wiki-Asterisk+RealTime+IAX
Therefore I have taken the SIP build script and added
a few fields that I use from my iax.conf (could be
more out there, please see the complete build script
below):
`dbsecret`
Jason Goecke wrote:
While most of IAX peers are working for
inbound/outbound, Voicepulse is not (requires the
'qualify' field set to yes). Not sure if this is a
problem on my side (although it works from the
iax.conf settings).
qualify= and mailbox= do not work with the realtime configuration
