There should be no quotes after the : in the cisco SIPmacaddress.cnf files.
Change it from:
# Line 1
line1_name: Scott
line1_authname: scott
line1_password: scott
# Line 2
line2_name: Scott1
line2_authname: scott1
line2_password: scott1
To:
# Line 1
line1_name: Scott
line1_authname:scott
I did set these to the correct poxy serveras well in the SIPDefault.cnf
file.
This is very frustrating problem, I have ready dozens of posts that
refer to how to set this up and I see mto have followed all the suggestions.
I had not looked at the phones settings yet, thanks for the suggestion.
I had not looked at the phones settings yet, thanks for the
suggestion. The setting indicate that there is no configuration on the
second line it is listed as UNPROVISIONED
Go into the phone and program Line 2 Settings directly, without using
the SIPMAC.cnf file. If that works, then your .cnf
I set this up manually on the phone and it works just fine so config
files ... I attached the complete config files so maybe someone can
see what I am missing.
argon:/tftpboot# cat SIPDefault.cnf
# SIP Default Generic Configuration File
# Image Version
image_version:
Someone on the list spotted the problem, there is a typo in my line
definitions.
Thanks all
Scott Henderson wrote:
I set this up manually on the phone and it works just fine so config
files ... I attached the complete config files so maybe someone can
see what I am missing.
Theres your problem right there; All of them say line2_X
Nathan.
# Line 2
line2_name: Scott1
line2_authname: scott1
line2_password: scott1
# Line 3
line2_name: Line 2
line2_authname: UNPROVISIONED
line2_password: UNPROVISIONED
# Line 4
line2_name: Line 4
line2_authname: UNPROVISIONED
I have been trying to get multiple lines on the 7960 to work for several
days. i have read all the posts I can find and have run multiple sip
debug and have gotten no place on this.
Here are the relevant section of the config files:
sip.conf
[scott]
type=friend
host=dynamic
username=scott
Do you have:
# Proxy Server
proxy1_address: x.x.x.x
proxy2_address: x.x.x.x
Unsure if this is required, does your phone list the correct server ?
(settings | 4 | 2 | 6)
Nathan.
Scott Henderson wrote:
I have been trying to get multiple lines on the 7960 to work for
several days. i have read all