Re: [Asterisk-Users] Problem with pulses dialing on asterisk 1.2
On Nov 28, 2005, at 3:00 PM, John Novack wrote: Cyrille DERORY wrote: I'm using asteriskathome 2.0 beta 6 (asterisk 1.2) with SIP softphones, 7905G cisco SCCP and analog phone( DTMF dialing). All is working nice, however when I change DTMF for an analog pulse dialing,my analog phone is not working. I've found the following : http://www.voip-info.org/wiki-Asterisk+config+zapata.conf pulse=yes http://www.voip-info.org/wiki/index.php?page=Asterisk+zaptel+pulse +dialing pulsedial=yes Pulsedial=yes works You should be aware that inserting a "w" into the dialstring does NOT work with pulsedial, however, so if your PSTN connection is a little slow, you may get misdials Remember you need to restart after making the change. To be really safe, reboot. I think this might be a problem peculiar to Asterisk @ home, since I cannot get my install to accept pulsedial=yes, either. Even though I have tried specifying pulsedial=yes in zapata.conf before the channel=> line and also in zapata-auto.conf, as well as in zapata_additional.conf (along with the extension's config), none of the above work. (I figured I'd try everywhere, even if it didn't make any sense...) Anyhow, if I connect to the Asterisk console and run "zap show channel 1", it reports "Pulse phone: no" even though "pulsedial=yes" is specified. I don't know how [EMAIL PROTECTED]/AMP would have modified zaptel to break this, but it is indeed possible that this is an [EMAIL PROTECTED] specific problem. Tom Tom Rymes Cascade Link Systems www.cascadelinksystems.com (603) 375-1414 "Intelligent technology solutions for small businesses." ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Problem with pulses dialing on asterisk 1.2
Cyrille DERORY wrote: I'm using asteriskathome 2.0 beta 6 (asterisk 1.2) with SIP softphones, 7905G cisco SCCP and analog phone( DTMF dialing). All is working nice, however when I change DTMF for an analog pulse dialing,my analog phone is not working. I've found the following : http://www.voip-info.org/wiki-Asterisk+config+zapata.conf pulse=yes http://www.voip-info.org/wiki/index.php?page=Asterisk+zaptel+pulse+dialing pulsedial=yes Pulsedial=yes works You should be aware that inserting a "w" into the dialstring does NOT work with pulsedial, however, so if your PSTN connection is a little slow, you may get misdials Remember you need to restart after making the change. To be really safe, reboot. John Novack What is correct : pulse=yes or pulsedial=yes ? However none are working ! I probably miss something. I need your help. Is there any french users with pulses dialing on analog phones ? Thanks. ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Problem with pulses dialing on asterisk 1.2
I'm using asteriskathome 2.0 beta 6 (asterisk 1.2) with SIP softphones, 7905G cisco SCCP and analog phone( DTMF dialing). All is working nice, however when I change DTMF for an analog pulse dialing,my analog phone is not working. I've found the following : http://www.voip-info.org/wiki-Asterisk+config+zapata.conf pulse=yes http://www.voip-info.org/wiki/index.php?page=Asterisk+zaptel+pulse+dialing pulsedial=yes What is correct : pulse=yes or pulsedial=yes ? However none are working ! I probably miss something. I need your help. Is there any french users with pulses dialing on analog phones ? Thanks. ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users