Hello Jim,
I tryed that with capi.. but no luke. It will hang up the line anyway :-(
exten = s,1,Playback(transfer)
exten = s,2,Flash(capi/72044**:041720,18)
exten = s,3,SendDTMF(${ARG1})
exten = s,4,Hangup()
Any idears why ?
BTW: Whats actually that SendDTMF ? thing ?
Thx for the help..
Grüsse / Best Regards
Mateo Meier
-
Don't marry for money; you can borrow it cheaper ;-)
-Ursprüngliche Nachricht-
Von: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Im Auftrag von Jim Van
Meggelen
Gesendet: Samstag, 26. Februar 2005 07:54
An: [EMAIL PROTECTED]; 'Asterisk Users Mailing List - Non-Commercial Discussion'
Betreff: RE: [Asterisk-Users] Transfer a call ? Am I
lookingfortheflashcommand ?
[EMAIL PROTECTED] wrote:
Hello Jim,
thx for the answer..
Im happy I found someone that is using flash :)
It's not perfect, but it can be useful.
Am I right, if I transfer a call with flash, the line will be free
afterwards ?
Yep
Would you mind to past me how you did the flash part @the
extention file ? Also, If I use flash, do I have to setup
anything else or just @the extention file ?
Jere's the relevant section of my dial plan:
[macro-cell_user]
exten = s,1,Playback(transfer)
exten = s,2,Flash(zap/1)
exten = s,3,SendDTMF(${ARG1})
exten = s,4,Hangup()
Good luck!
Jim.
-Ursprüngliche Nachricht-
Von: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Im Auftrag von Jim
Van Meggelen Gesendet: Freitag, 25. Februar 2005 05:57
An: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Betreff: RE: [Asterisk-Users] Transfer a call ? Am I looking for
theflashcommand ?
[EMAIL PROTECTED] wrote:
On Fri, 2005-02-25 at 00:50 +0100, Mateo Meier wrote:
Hey Guys
Im trying to forward a call with asterisk to a regular phone.
Something like I get a call on my regular phone, and he's trying
to reach some buddy of mine.. then I tell him wait a sec and push
Flash and get a other dialtone.. then I dial that other number
then hangup the phone, so the one that called will be connected to
where I dialed it to...
Some buddy of mine told me im looking for a function called flash
Only thing Im able to find is:
http://www.voip-info.org/tiki-index.php?page=Asterisk%20cmd%20Flash
Im unsure how to use it now..
Let's say if I forward a call with asterisk as following: exten =
2,1,Dial(capi/720:07812345*,18)
How would I use the flash command to transfer that call above to 078
12345* ? I have no problem transferring a call, but when Im doing
this with the dial command (see above).. then my line will be busy
Been covered before, You can't do that on an analog line. Problem
comes from where you are and what flash would be working on at that
point. If you flash asterisk and get dialtone again, you are getting
the dialtone
from asterisk. At this point the only channel being worked is the one
you are on and flashing it won't help.
What you would need to do is get the other leg of the call to make
the flash.
It might be really handy to be able to specify the trunk to
flash() as an argument. I use flash in my dialplan to
transfer incoming calls to my cell phone when I'm out and
about - frees up the line and reduces attenuation caused by
an analog trombone. It'd be handy to be able to use it to
transfer terminated calls as well.
Of course if you where on a PRI link, you could do hairpinning,
ect or tromboning and get the call taken back by the PSTN and
transferred to the new number.
--
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 266.4.0 - Release Date: 22/02/2005
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Spam detection software, running on the system zeus.avanzada7.com, has
identified this incoming email as possible spam. The original message
has been attached to this so you can view it (if it isn't spam) or label
similar future email. If you have any questions, see
the administrator of that system for details.
Content preview: [EMAIL PROTECTED] wrote: Hello
Jim, thx for the answer.. Im happy I found someone that is using
flash :) It's not perfect, but it can be useful. Am I right, if I
transfer a call with flash, the line will be free afterwards ? [...]
Content analysis details: (0.1 points, 5.0 required)
pts rule name description
--
--
0.1 FORGED_RCVD_HELO Received: contains a forged HELO
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE