Right at the end of your Zapata.conf you have:
#include zapata_additional.conf
hanguponpolarityswitch
;Include genzaptelconf configs
#include zapata-auto.conf
Remove that hanuponpolarityswitch as you already have
hanguponpolarityswitch=yes earlier on, and I don't know what having the
second one,
I installed this card, everything work, i can make call and receive
call with no echo and great sound quality, but after between 5 to 50
secs the call disconnect by itself, in the log i don't see nothing
revelant.
In logging.conf, try enabling debug logging to the console and/or to
This is my zaptel and zapata. In my logger.conf this is what is enabled :
full = notice,warning,error,debug,verbose.
How can you turn on the log in chan_zap.c and where you can access
it. You can see i'm a newbee :-)
Thanks for your help
Pierre
;
; Zapata telephony interface
;
;
I installed this card, everything work, i can make call and receive
call with no echo and great sound quality, but after between 5 to 50
secs the call disconnect by itself, in the log i don't see nothing
revelant.
I don't share any IRQ, zttest show me values between 99.98 and 100.
The only thing
[EMAIL PROTECTED] wrote:
Hello,
I have recently bought a X100P card. I installed asterisk succesfuly.
When I plug my operator's line in the line jack of the card the result
is that my line is not working any more. When I put it back to the phone, everything OK.
It seems that the card leaves
Hello,
I have recently bought a X100P card. I installed asterisk succesfuly.
When I plug my operator's line in the line jack of the card the result
is that my line is not working any more. When I put it back to the phone,
everything OK.
It seems that the card leaves the line open!
The same
Much thanks to those of you who are following this
thread. The information has been most helpful.
Here's an update for those who are interested. I
unplugged everything from every phone line, and tried
it all again, and it worked!
It worked for about 5 hours. Then, I started to get
phantom
On Tue, 6 Jul 2004 07:51:53 -0700 (PDT), Shaun Dawson
[EMAIL PROTECTED] wrote:
On Monday morning, I got the same behaviour, with the
phantom phone calls. After much troubleshooting, I
finally, changed the card out of the machine (I have
two cards), made a call out with a regular phone to
On Tue, 6 Jul 2004 07:51:53 -0700 (PDT), Shaun Dawson
[EMAIL PROTECTED] wrote:
On Monday morning, I got the same behaviour, with the
phantom phone calls. After much troubleshooting, I
finally, changed the card out of the machine (I have
two cards), made a call out with a regular
Just to add some info to this, Hope it will help
I had a similar problem when first testing my * setup.
I was testing it with an active dual line phone line
(all four wires active) and for some reason the X100P
did not like that at all.
Easiest way is to make sure your line from the jack is
just
Shaun Dawson [EMAIL PROTECTED] wrote:
It sounds to me as if there's a problem on the line. If your X100P
was just not answering then the caller should hear a ring tone,
rather than a recorded message. Well, I don't know anything about
your telco, but that's what would happen here if I
Shaun Dawson [EMAIL PROTECTED]
However, if I try to dial out, I connect, but get
absolutely nothing. The cell phone doesn't ring, and
no audio.
If I try to dial in, I get a phone system recording
that says due to phone system trouble, this call
cannot be completed.
This is the type of
Have you tried connecting an ordinary phone into the
line and
making/receiving calls?
I have, and it works fine. In fact, If I plug the
card into the line, and then a phone into the 'phone'
jack on the card, the line works fine (though I can't
imagine why that would make a difference).
Hello, folks,
I'm having a problem where my X100P isn't behaving
the way I think it should.
I have the hardware installed fine, with the phone
line connected to the port labeled 'line', and nothing
in the port labeled 'phone'.
The zaptel and wcfxo modules load fine, and there is
a line in
On Mon, 2004-05-17 at 19:46, Jorge Verastegui wrote:
When i make a call from Asterisk everything goes Ok,
I do have a problem: when a call from the PSTN originates, the extension
in Asterisk hangs up and I only hear silence in the PSTN for
approximately 60 seconds.
I mean instead, if
The silence last 60s (aprox)
On Sun, 2004-05-16 at 21:38, Juan J. Sierralta P. wrote:
On Sun, 2004-05-16 at 15:15, Jorge Verastegui wrote:
Hi
Please help!
I have one X101P and TDM400P in my asterisk Box
When i make a call from * to PSTN, everything goes Ok,
When the PSTN
On Mon, 2004-05-17 at 12:10, Jorge Verastegui wrote:
The silence last 60s (aprox)
So maybe is the timeout used by your Telco (Entel?) Here at Chile we
use 30s to let called people to be able to hang and get the call on
another phone plugged to the same line.
So I think its better
When i make a call from Asterisk everything goes Ok,
I do have a problem: when a call from the PSTN originates, the extension
in Asterisk hangs up and I only hear silence in the PSTN for
approximately 60 seconds.
On Mon, 2004-05-17 at 16:56, Juan J. Sierralta P. wrote:
On Mon, 2004-05-17 at
Paste your extensions.conf
Check the answer command if you're running IVR of special services.
- Original Message -
From: Jorge Verastegui
To: [EMAIL PROTECTED]
Sent: Monday, May 17, 2004 8:46 PM
Subject: Re: [Asterisk-Users] X100P problem with PSTN from BOLIVIA
When i make a call from
if you're running IVR of special services.
- Original Message -
From: Jorge Verastegui
To: [EMAIL PROTECTED]
Sent: Monday, May 17, 2004 8:46 PM
Subject: Re: [Asterisk-Users] X100P problem with PSTN from BOLIVIA
When i make a call from Asterisk everything goes Ok,
I do have a problem
Hi
Please help!
I have one X101P and TDM400P in my asterisk Box
When i make a call from * to PSTN, everything goes Ok,
When the PSTN hangups or * hangups, the busy tone is detected and *
disconnects the channel without problems.
The problem occurs when the call comes from PSTN. When *
On Sun, 2004-05-16 at 15:15, Jorge Verastegui wrote:
Hi
Please help!
I have one X101P and TDM400P in my asterisk Box
When i make a call from * to PSTN, everything goes Ok,
When the PSTN hangups or * hangups, the busy tone is detected and *
disconnects the channel without problems.
Title: X100p problem
I am having a problem with the x100p cards. It doesn't matter whether the card is in the machine or not, all I get is a busy signal when calling. The Asterisk box doesn't give me any errors and doesn't show that any call is coming through. I removed the cards from the
PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Sean Garland
Sent: Thursday, December 25, 2003 3:31 AM
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users] X100p problem
I am having a problem with the x100p cards. It doesn't matter whether the
card is in the machine or not, all I get is a busy signal
24 matches
Mail list logo
