[Asterisk-Users] beronet bristuff
Hi. Im trying to get a Beronet QuadBRI card work with bristuff drivers. Though qozap module loads right, all card spans are in deactivated status. Im quite sure my configuration is correct and using a single BRI card instead of the quadBRI the status is active and I can place and receive calls. On Beronet installation manual I read that Beronet and Junghanns cards are identical in their construction but Junghanns made bristuff so that only their cards can work with their drivers. In the same document and googling around I found that bristuff source files must be patched to recognize other cards. Anyone has experienced with this? The alternative would be using mISDN, but Im not sure its as fine as bristuff. Thanks, _fangi_ ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] beronet bristuff
On Wed, Mar 22, 2006 at 01:04:44PM +0100, Francesco Angi wrote: Hi. I'm trying to get a Beronet QuadBRI card work with bristuff drivers. Though qozap module loads right, all card spans are in deactivated status. I'm quite sure my configuration is correct and using a single BRI card instead of the quadBRI the status is active and I can place and receive calls. Just to clarify this: The bristuff drivers don't use the standard PCI bus drivers loading. They scan the bus on their own. Did it report finding any cards? Were spans created? What do you see under /proc/zaptel ? What version of bristuff, BTW? ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] beronet bristuff
Ciao Francesco, in data mercoledì 22 marzo 2006, alle ore 13.04, hai scritto: On Beronet installation manual I read that Beronet and Junghanns cardsare identical in their construction but Junghanns made bristuff so that only their cards can work with their drivers. In the same document and googling around I found that bristuff source files must be patched to recognize other cards. Anyone has experienced with this? The alternative would be using mISDN, but Im not sure its as fine as bristuff. We had for testing purposes, look for pci id of card in source code, I'm not telling more about that since it may seem rude. Give misdn a test, it works better every day! Saluti, mandami un messaggio privato ad alessio AT interconnessioni PUNTO it se vuoi continuare la discussione. -- I migliori saluti,Scrivi a: Alessio[EMAIL PROTECTED] ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
