Re: [asterisk-users] 1000 analogue lines with asterisk

On Fri, Feb 19, 2016 at 10:52:34AM +1300, Daniel Harper wrote: > What about leaving the old PBX in place and trunking it via ISDN to the > asterisk server. > > We use rhino 24 channel bank but are 2U for rhino + 1U for patch panel. > (RJ21 cable so might be able to use existing ones if they are

Re: [asterisk-users] 1000 analogue lines with asterisk

What about leaving the old PBX in place and trunking it via ISDN to the asterisk server. We use rhino 24 channel bank but are 2U for rhino + 1U for patch panel. (RJ21 cable so might be able to use existing ones if they are RJ21) Used USB xorcoms a while back, things may of changed but if one is

Re: [asterisk-users] 1000 analogue lines with asterisk

Hi, All of the back and forth of Analog vs VoIP handsets tend to ignore some of the basic issues. What type of cabling is in place, does it need to be upgraded to do Ethernet, etc. The "gateways" can be handy if there are many closets where the wiring terminates AND you have Ethernet to

Re: [asterisk-users] 1000 analogue lines with asterisk

That would be the expensive route. The inexpensive route would be to buy FXS ethernet gateways, like this: http://www.voipsupply.com/grandstream-gxw4248. You could then get by with a single reasonably sized asterisk box (probably two setup as HA) and no need for expensive cards or complex

Re: [asterisk-users] 1000 analogue lines with asterisk

+1 spending money to get that many fxs ports is going to negate any savings of reusing analog phones instead of buying ip phones 1000 analog ports sounds like hell and if it was me I would be embarrassed to have a setup like that tied to my name if I was a consultant etc. Someone will come in

Re: [asterisk-users] 1000 analogue lines with asterisk

Thank you all, I will look at the options and work on them. Regards On Wed, Feb 17, 2016 at 10:22 AM, A J Stiles wrote: > On Wednesday 17 Feb 2016, Goke Aruna wrote: > > Hello all, > > Can someone recommend what hardware to use for a 1000 analogue line > >

Re: [asterisk-users] 1000 analogue lines with asterisk

On Wednesday 17 Feb 2016, Goke Aruna wrote: > Hello all, > Can someone recommend what hardware to use for a 1000 analogue line > capacity asterisk PABX? > > Regards A PCI express card with four primary rate ISDN ports, each linked up to a channel bank, will give you 120 analogue lines. So you

Re: [asterisk-users] 1000 analogue lines with asterisk

Thanks When I designed the server, I catered for only IP phones but customer want to discard the existing analogue pbx while they want to reuse their cables and analogue phones. Regards On Feb 17, 2016 09:27, "Matt Riddell (lists)" wrote: > There is definitely no way you

Re: [asterisk-users] 1000 analogue lines with asterisk

There is definitely no way you should put 1000 lines on a single box. To be honest I do wonder what you want to do with 1000 lines as your description probably changes the recommendations. Kind regards, Matt > On Feb 17, 2016, at 5:09 PM, Goke Aruna wrote: > > Thanks

Re: [asterisk-users] 1000 analogue lines with asterisk

Thanks Harry. I will check and revert. I hope it work perfectly with asterisk. Regards On Wed, Feb 17, 2016 at 8:32 AM, Harry McGregor wrote: > Hi, > > For analog, I really like telco grade channel banks. > > I would recommend the adit 600, there is a good market on

Re: [asterisk-users] 1000 analogue lines with asterisk

Hi, For analog, I really like telco grade channel banks. I would recommend the adit 600, there is a good market on Ebay, and you can do 48 channels per adit 600, with 2 T1 interfaces. Having onsite spares would not be an issue (cost is low). You can put two next to each other in a rack,

Re: [asterisk-users] 1000 analogue lines with asterisk

On Wed, Feb 17, 2016 at 8:14 AM, Mitul Limbani wrote: > Sangoma 50 port FXS Thanks. Will I now stack 20 boxes in order to achieve the 1000 FXS lines? Regards -- _ -- Bandwidth and Colocation Provided by

Re: [asterisk-users] 1000 analogue lines with asterisk

Use Sangoma 50 port FXS On Feb 17, 2016 12:42 PM, "Goke Aruna" wrote: > Thanks Mitul, > The server spec is okay but I need information on the fxs hardware to use. > Regards > > On Wed, Feb 17, 2016 at 8:07 AM, Mitul Limbani wrote: > >> Quad core Xeon with 4GB

Re: [asterisk-users] 1000 analogue lines with asterisk

Thanks Mitul, The server spec is okay but I need information on the fxs hardware to use. Regards On Wed, Feb 17, 2016 at 8:07 AM, Mitul Limbani wrote: > Quad core Xeon with 4GB ram > On Feb 17, 2016 12:32 PM, "Goke Aruna" wrote: > >> Hello all, >> Can

Re: [asterisk-users] 1000 analogue lines with asterisk

Quad core Xeon with 4GB ram On Feb 17, 2016 12:32 PM, "Goke Aruna" wrote: > Hello all, > Can someone recommend what hardware to use for a 1000 analogue line > capacity asterisk PABX? > > Regards > > -- > _ > --

[asterisk-users] 1000 analogue lines with asterisk

Hello all, Can someone recommend what hardware to use for a 1000 analogue line capacity asterisk PABX? Regards -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live