thanks,
this delay is occurred on asterisk server, between dial execution and
CALLED .
On Mon, May 9, 2011 at 7:12 PM, Warren Selby wcse...@selbytech.com wrote:
On Mon, May 9, 2011 at 7:26 AM, Pezhman Lali l...@lopl.net wrote:
Dear
I have a small pbx with asterisk 1.6.2.16.
I have a
Show us the cli trace of the delay.
Thanks,
--Warren Selby, dCAP
On May 10, 2011, at 2:18 AM, Pezhman Lali l...@lopl.net wrote:
thanks,
this delay is occurred on asterisk server, between dial execution and
CALLED .
On Mon, May 9, 2011 at 7:12 PM, Warren Selby
Good call Warren, might I add that a great idea would be to set debug and
verbose to 5, change the timestamp format on your logs temporarily to show
HH:mm:ss:ms (don't necessarily need milliseconds, but I'm an accuracy geek),
make sure you have a log that is writing ALL output (except maybe DTMF,
Dears
thanks for your all helps.
with assigning ip to the sip.conf and disabling srv_lookup the delay was
removed.
thanks again
best
On Tue, May 10, 2011 at 12:31 PM, mahesh katta maheshka...@flexydial.comwrote:
Dear Pezhman Lali,
Just below lines add in you sip.conf, after this if you get
Dear
I have a small pbx with asterisk 1.6.2.16.
I have a funny problem, there is exactly 40sec between dial execution and
sending first invite packet on sip.
do you have any idea where the problem is ?
Best regards
--
Pezhman Lali
--
On Mon, May 9, 2011 at 7:26 AM, Pezhman Lali l...@lopl.net wrote:
Dear
I have a small pbx with asterisk 1.6.2.16.
I have a funny problem, there is exactly 40sec between dial execution and
sending first invite packet on sip.
do you have any idea where the problem is ?
Check the dial timeout