Re: [asterisk-users] Anyone have a reliable T.38 Solution
I didn't know spandsp could do 14.4k : that's great ! So, now I'm realizing how strange my previous question could resonate. Thanks for clarifying this. 2012/1/11, Steve Underwood : > On 01/11/2012 11:16 PM, Olivier wrote: >> 2012/1/11, Steve Underwood: >>> On 01/11/2012 03:01 PM, Olivier wrote: 2012/1/5, Kevin P. Fleming: > On 01/04/2012 12:25 AM, Matt Darnell wrote: >> Aloha, >> >> We are looking to roll a solution that will have the following network >> layout: >> >> ISDN-PRI<-->Asterisk<-->T.38<-->ATA<-->Fax >> >> Does version 1.8 with the Digium fax driver have this capability? I >> like 1.8 because it is a long term support version. >> >> What ATA's are people using? >> >> Any working solutions would be great! > What you are looking for is T.38 gateway mode (converting between T.30 > over modems on a TDM circuit and T.38 over UDPTL), and the answer is > no: > Asterisk 1.8 does not have T.38 gateway mode. Asterisk 10 does, and it > is supported using SpanDSP and res_fax_spandsp. It is not yet supported > by Digium's Fax for Asterisk commercial FAX module. Do you have any idea when Digium's Fax for Asterisk commercial FAX module could roughly become supported ? >>> Are you really desperate to pay for functionality you can get for free? >> Not yet ;-))) >> But the increased fax sending speed (14.4 kbs/s says the datasheet but >> I must be too naive to still read datasheets) may be a feature >> interesting for some. >> >> By the way, which spandsp version would recommend for asterisk 10 ? >> spandsp-0.0.6pre18.tgz ? >> > How is 14.4k an increase? Both spandsp and the Digium modules do 14.4k. > There is nothing the Digium module does which spandsp does not do, and > the file handling in spandsp is more flexible. > > spandsp-0.0.6pre18.tgz is currently the right version to use? > > Steve > > > -- > _ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: >http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Anyone have a reliable T.38 Solution
On 01/11/2012 11:16 PM, Olivier wrote: 2012/1/11, Steve Underwood: On 01/11/2012 03:01 PM, Olivier wrote: 2012/1/5, Kevin P. Fleming: On 01/04/2012 12:25 AM, Matt Darnell wrote: Aloha, We are looking to roll a solution that will have the following network layout: ISDN-PRI<-->Asterisk<-->T.38<-->ATA<-->Fax Does version 1.8 with the Digium fax driver have this capability? I like 1.8 because it is a long term support version. What ATA's are people using? Any working solutions would be great! What you are looking for is T.38 gateway mode (converting between T.30 over modems on a TDM circuit and T.38 over UDPTL), and the answer is no: Asterisk 1.8 does not have T.38 gateway mode. Asterisk 10 does, and it is supported using SpanDSP and res_fax_spandsp. It is not yet supported by Digium's Fax for Asterisk commercial FAX module. Do you have any idea when Digium's Fax for Asterisk commercial FAX module could roughly become supported ? Are you really desperate to pay for functionality you can get for free? Not yet ;-))) But the increased fax sending speed (14.4 kbs/s says the datasheet but I must be too naive to still read datasheets) may be a feature interesting for some. By the way, which spandsp version would recommend for asterisk 10 ? spandsp-0.0.6pre18.tgz ? How is 14.4k an increase? Both spandsp and the Digium modules do 14.4k. There is nothing the Digium module does which spandsp does not do, and the file handling in spandsp is more flexible. spandsp-0.0.6pre18.tgz is currently the right version to use? Steve -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Anyone have a reliable T.38 Solution
On 01/11/2012 09:16 AM, Olivier wrote: 2012/1/11, Steve Underwood: On 01/11/2012 03:01 PM, Olivier wrote: 2012/1/5, Kevin P. Fleming: On 01/04/2012 12:25 AM, Matt Darnell wrote: Aloha, We are looking to roll a solution that will have the following network layout: ISDN-PRI<-->Asterisk<-->T.38<-->ATA<-->Fax Does version 1.8 with the Digium fax driver have this capability? I like 1.8 because it is a long term support version. What ATA's are people using? Any working solutions would be great! What you are looking for is T.38 gateway mode (converting between T.30 over modems on a TDM circuit and T.38 over UDPTL), and the answer is no: Asterisk 1.8 does not have T.38 gateway mode. Asterisk 10 does, and it is supported using SpanDSP and res_fax_spandsp. It is not yet supported by Digium's Fax for Asterisk commercial FAX module. Do you have any idea when Digium's Fax for Asterisk commercial FAX module could roughly become supported ? Are you really desperate to pay for functionality you can get for free? Not yet ;-))) But the increased fax sending speed (14.4 kbs/s says the datasheet but I must be too naive to still read datasheets) may be a feature interesting for some. By the way, which spandsp version would recommend for asterisk 10 ? spandsp-0.0.6pre18.tgz ? There are currently no modem speed differences between res_fax_spandsp and res_fax_digium. Both support all commonly-used FAX modems except V.34. We do not currently have an estimate on when Fax For Asterisk will support T.38 gateway mode (or V.34, for that matter). -- Kevin P. Fleming Digium, Inc. | Director of Software Technologies Jabber: kflem...@digium.com | SIP: kpflem...@digium.com | Skype: kpfleming 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at www.digium.com & www.asterisk.org -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Anyone have a reliable T.38 Solution
2012/1/11, Steve Underwood : > On 01/11/2012 03:01 PM, Olivier wrote: >> 2012/1/5, Kevin P. Fleming: >>> On 01/04/2012 12:25 AM, Matt Darnell wrote: Aloha, We are looking to roll a solution that will have the following network layout: ISDN-PRI<--> Asterisk<--> T.38<--> ATA<--> Fax Does version 1.8 with the Digium fax driver have this capability? I like 1.8 because it is a long term support version. What ATA's are people using? Any working solutions would be great! >>> What you are looking for is T.38 gateway mode (converting between T.30 >>> over modems on a TDM circuit and T.38 over UDPTL), and the answer is no: >>> Asterisk 1.8 does not have T.38 gateway mode. Asterisk 10 does, and it >>> is supported using SpanDSP and res_fax_spandsp. It is not yet supported >>> by Digium's Fax for Asterisk commercial FAX module. >> Do you have any idea when Digium's Fax for Asterisk commercial FAX >> module could roughly become supported ? > Are you really desperate to pay for functionality you can get for free? Not yet ;-))) But the increased fax sending speed (14.4 kbs/s says the datasheet but I must be too naive to still read datasheets) may be a feature interesting for some. By the way, which spandsp version would recommend for asterisk 10 ? spandsp-0.0.6pre18.tgz ? > > Steve > > > -- > _ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: >http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Anyone have a reliable T.38 Solution
On 01/11/2012 03:01 PM, Olivier wrote: 2012/1/5, Kevin P. Fleming: On 01/04/2012 12:25 AM, Matt Darnell wrote: Aloha, We are looking to roll a solution that will have the following network layout: ISDN-PRI<--> Asterisk<--> T.38<--> ATA<--> Fax Does version 1.8 with the Digium fax driver have this capability? I like 1.8 because it is a long term support version. What ATA's are people using? Any working solutions would be great! What you are looking for is T.38 gateway mode (converting between T.30 over modems on a TDM circuit and T.38 over UDPTL), and the answer is no: Asterisk 1.8 does not have T.38 gateway mode. Asterisk 10 does, and it is supported using SpanDSP and res_fax_spandsp. It is not yet supported by Digium's Fax for Asterisk commercial FAX module. Do you have any idea when Digium's Fax for Asterisk commercial FAX module could roughly become supported ? Are you really desperate to pay for functionality you can get for free? Steve -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Anyone have a reliable T.38 Solution
2012/1/5, Kevin P. Fleming : > On 01/04/2012 12:25 AM, Matt Darnell wrote: >> Aloha, >> >> We are looking to roll a solution that will have the following network >> layout: >> >> ISDN-PRI<--> Asterisk<--> T.38<--> ATA<--> Fax >> >> Does version 1.8 with the Digium fax driver have this capability? I >> like 1.8 because it is a long term support version. >> >> What ATA's are people using? >> >> Any working solutions would be great! > > What you are looking for is T.38 gateway mode (converting between T.30 > over modems on a TDM circuit and T.38 over UDPTL), and the answer is no: > Asterisk 1.8 does not have T.38 gateway mode. Asterisk 10 does, and it > is supported using SpanDSP and res_fax_spandsp. It is not yet supported > by Digium's Fax for Asterisk commercial FAX module. Do you have any idea when Digium's Fax for Asterisk commercial FAX module could roughly become supported ? > > -- > Kevin P. Fleming > Digium, Inc. | Director of Software Technologies > Jabber: kflem...@digium.com | SIP: kpflem...@digium.com | Skype: kpfleming > 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA > Check us out at www.digium.com & www.asterisk.org > > -- > _ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: >http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Anyone have a reliable T.38 Solution
On Fri, Jan 6, 2012 at 10:01 AM, Benny Amorsen wrote: > David Backeberg writes: > > > Thanks for clearing that up. I was getting all excited that I could > > flash the PAP2T; I've always used regular voice tones over SIP with > > the PAP2Ts. > > SPA-2102 supports T.38. If you ignore the WAN-port, it is practically a > PAP2T. The only time you cannot ignore the WAN-port is when doing > provisioning. I ignore the LAN (yellow) port and only use the WAN (blue) port. The LAN port has a DHCP server enabled by default. The WAN port is setup with a DHCP client. The good thing about using the WAN port is if the settings are cleared you won't have an unknown DHCP server on your network. I plug a phone in and dial the below. Then you can configure the rest from the web interface. to enter admin ivr 7932 enter 1 to enable web interface 110 will read the WAN address Ryan -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Anyone have a reliable T.38 Solution
David Backeberg writes: > Thanks for clearing that up. I was getting all excited that I could > flash the PAP2T; I've always used regular voice tones over SIP with > the PAP2Ts. SPA-2102 supports T.38. If you ignore the WAN-port, it is practically a PAP2T. The only time you cannot ignore the WAN-port is when doing provisioning. /Benny -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Anyone have a reliable T.38 Solution
On Thu, Jan 5, 2012 at 8:05 AM, Steve Underwood wrote: > No PAP2 or PAP2T supports T.38, even though many people will swear that they > do. For a little while there was some beta code for the PAP2T with badly > broken T.38 support. Perhaps this is where the "legend of T.38 on a PAP2T" > started. Of course, on the internet, when someone posts an incorrect message > many people would like to believe is right, a 1000 people cite it as proven > fact. Thanks for clearing that up. I was getting all excited that I could flash the PAP2T; I've always used regular voice tones over SIP with the PAP2Ts. -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Anyone have a reliable T.38 Solution
On 01/05/2012 07:45 PM, Michael Keuter wrote: Am 05.01.2012 um 04:55 schrieb Matt Darnell: On Wed, Jan 4, 2012 at 1:02 AM, David Klaverstyn wrote: I'm using the Linksys PAP2T and the Grandstream with SpanDSP and tx_fax and rx_fax on multiple installations with no problems. David, Are you running 10.0 or 1.8? Glad to know that the PAP2T has a solid T.38 implementation! -Matt There seem to be at least 2 versions of the PAP2T. The one I have (in Germany) does NOT support T.38. Michael http://www.mksolutions.info No PAP2 or PAP2T supports T.38, even though many people will swear that they do. For a little while there was some beta code for the PAP2T with badly broken T.38 support. Perhaps this is where the "legend of T.38 on a PAP2T" started. Of course, on the internet, when someone posts an incorrect message many people would like to believe is right, a 1000 people cite it as proven fact. Steve -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Anyone have a reliable T.38 Solution
Am 05.01.2012 um 04:55 schrieb Matt Darnell: > On Wed, Jan 4, 2012 at 1:02 AM, David Klaverstyn > wrote: >> I'm using the Linksys PAP2T and the Grandstream with SpanDSP and tx_fax and >> rx_fax on multiple installations with no problems. > > David, > > Are you running 10.0 or 1.8? > > Glad to know that the PAP2T has a solid T.38 implementation! > > -Matt There seem to be at least 2 versions of the PAP2T. The one I have (in Germany) does NOT support T.38. Michael http://www.mksolutions.info -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Anyone have a reliable T.38 Solution
On 04.01.2012 07:25, Matt Darnell wrote: > We are looking to roll a solution that will have the following network layout: > > ISDN-PRI <--> Asterisk <--> T.38 <--> ATA <--> Fax > > Does version 1.8 with the Digium fax driver have this capability? I > like 1.8 because it is a long term support version. > > What ATA's are people using? > > Any working solutions would be great! we are using such a setup: Telco <-PRI-> bero*fixBox <-BRI-> Fritz!BoxFon <-analog-> FaxMachine | +--<-SIP-> Asterisk <-SIP-> Phones | +-- t38modem <-tty-> Hylafax The bero*fixBox http://www.beronet.com/product/berofix-gateways/ is has one ISDN-PRI and 4 ISDN-BRI ports. The PRI-port is connected to the telco, one of the ISDN-BRI ports is connected to an old Fritz!Box Fon http://www.avm.de/en/Produkte/FRITZBox/FRITZ_Box_Fon/index.php which has 3 (newer ones only 2) analog ports. The calls are routed by the bero*fixBox to either the asterisk server or the hylafax server based on the DID number. The bero*fix box has ~30 softmodems that translate to T.38-SIP which is then connected to the t38modem on the hylafax server which handles around 70,000 faxpages a month. Outgoing (incoming only for test purposes) faxes from our analog fax machines are routed by our asterisk server back to the bero*fix box so we achive bit-slip-free (and therefore reliable) connection. Beronet also has PCI- and PCIe-cards to be directly installed in your asterisk server. Frank -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Anyone have a reliable T.38 Solution
I'm using 1.8, but also have 1.4 and 1.2 installs using the same configuration. Regards David. -Original Message- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Matt Darnell Sent: Thursday, 5 January 2012 1:55 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Anyone have a reliable T.38 Solution On Wed, Jan 4, 2012 at 1:02 AM, David Klaverstyn wrote: > I'm using the Linksys PAP2T and the Grandstream with SpanDSP and tx_fax and > rx_fax on multiple installations with no problems. David, Are you running 10.0 or 1.8? Glad to know that the PAP2T has a solid T.38 implementation! -Matt -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Anyone have a reliable T.38 Solution
On Wed, Jan 4, 2012 at 1:02 AM, David Klaverstyn wrote: > I'm using the Linksys PAP2T and the Grandstream with SpanDSP and tx_fax and > rx_fax on multiple installations with no problems. David, Are you running 10.0 or 1.8? Glad to know that the PAP2T has a solid T.38 implementation! -Matt -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Anyone have a reliable T.38 Solution
On 01/04/2012 12:25 AM, Matt Darnell wrote: Aloha, We are looking to roll a solution that will have the following network layout: ISDN-PRI<--> Asterisk<--> T.38<--> ATA<--> Fax Does version 1.8 with the Digium fax driver have this capability? I like 1.8 because it is a long term support version. What ATA's are people using? Any working solutions would be great! What you are looking for is T.38 gateway mode (converting between T.30 over modems on a TDM circuit and T.38 over UDPTL), and the answer is no: Asterisk 1.8 does not have T.38 gateway mode. Asterisk 10 does, and it is supported using SpanDSP and res_fax_spandsp. It is not yet supported by Digium's Fax for Asterisk commercial FAX module. -- Kevin P. Fleming Digium, Inc. | Director of Software Technologies Jabber: kflem...@digium.com | SIP: kpflem...@digium.com | Skype: kpfleming 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at www.digium.com & www.asterisk.org -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Anyone have a reliable T.38 Solution
I'm using the Linksys PAP2T and the Grandstream with SpanDSP and tx_fax and rx_fax on multiple installations with no problems. -Original Message- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Matt Darnell Sent: Wednesday, 4 January 2012 4:25 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [asterisk-users] Anyone have a reliable T.38 Solution Aloha, We are looking to roll a solution that will have the following network layout: ISDN-PRI <--> Asterisk <--> T.38 <--> ATA <--> Fax Does version 1.8 with the Digium fax driver have this capability? I like 1.8 because it is a long term support version. What ATA's are people using? Any working solutions would be great! Aloha, Matt -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Anyone have a reliable T.38 Solution
Aloha, We are looking to roll a solution that will have the following network layout: ISDN-PRI <--> Asterisk <--> T.38 <--> ATA <--> Fax Does version 1.8 with the Digium fax driver have this capability? I like 1.8 because it is a long term support version. What ATA's are people using? Any working solutions would be great! Aloha, Matt -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
