[asterisk-users] Asterisk as a caller ID
In a 1.4.24 system, out of several lines, one of ours gets 1 or more random calls a day with Asterisk as the caller ID. I have just seen this described in the last couple of weeks, but at the time it wasn't happening to us, and I the explanation didn't stick with me. Can anyone give me a pointer to this feature? Searching the message base for Asterisk seems futile. Thanks! Cary Fitch -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk as a caller ID
Cary Fitch wrote: In a 1.4.24 system, out of several lines, one of ours gets 1 or more random calls a day with Asterisk as the caller ID. In my experience, it happens when the caller is blocking their CID. I have programming in place that assigns the named restricted and the phone number of 0 if the caller-id is blank: exten = s,1,GotoIf($[${CALLERID(num)} = ]?2:3) exten = s,n,Set(CALLERID(all)=Restricted 0) Doug -- Ben Franklin quote: Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety. -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Asterisk, OCS and Caller-ID
Hello Everyone, We've connected OCS to Asterisk via OpenSips, and the voice functionality is working fine. I was wondering if anyone out there who has implemented a similar system would be willing to share any information on how they have implemented this, specifically with regards to URI numbering on the OCS side. So far, we've done this: 1. Extensions in * are 4-digit, and the Caller-ID is configured with this number. We append the area code and prefix for outbound calling. In order for the Communicator to pop-up with the username, we've had to put the full number with a + so that the normalized number will match the AD phone number. I would assume that we could fiddle with the Caller-Id with macros or something to correct this. 2. We really aren't sure how to handle the URI for OCS, since most people will continue to use both systems. Right now, it's their 10-digit number without the +, but I really don't know what a good solution is here. We add a SIP channel to their Dial() statement so that the desk phone and OC ring at the same time; we don't use Trixbox or anything like that, just a vanilla 1.4 installation 3. Calls from OCS use the URI configured for the account, so it's number only. I would assume there is a way to use LDAP with * to match a number to AD information and populate it that way. Overall, I'm fairly pleased with the setup so far. Call quality is good, people like the ability to dial straight from Outlook and OC, and people can use it on the road as a smartphone, without VPN access required. We have a lot of remote users and daily conference calls, so it's going to save money for that sort of thing as well. Thanks, Kevin ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk 1.2.16 - No Caller ID
Hi, have you tried different values of callerid? Maybe setting *useincomingcalleridonzaptransfer* to yes can help you. Giorgio Incantalupo OCOSA ListAcc wrote: Hello, When I upgraded a while back the caller ID stop working I have tried everything and searched the lists no answer. Please help!! I have two pots lines coming into the Asterisk Box caller ID is set in the zapta.conf Here is what our zapata.conf looks like [channels] busydetect=1 busycount=7 relaxdtmf=yes callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes usecallerid=yes echocancel=yes echocancelwhenbridged=yes rxgain=10.5 txgain=5.5 group=1 pickupgroup=1-4 immediate=no context=bell signalling=fxs_ks callerid=asreceived channel=1 channel=2 ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk 1.2.16 - No Caller ID
Giorgio, That does not work it just shows up as useincomingcalleridonzaptransfer I set the following: callerid=useincomingcalleridonzaptransfer. Are you referring to something else like useincomingcalleridonzaptransfer=yes Otis Surratt Jr. / [EMAIL PROTECTED] OCOSA Communications, LLC PH: 918.585.9882 x 205 Fax: 918.585.5857 Visit Tulsa's Best Internet Data Center: http://www.ocosa.com/hosting/colo/index.asp Giorgio Incantalupo wrote: Hi, have you tried different values of callerid? Maybe setting *useincomingcalleridonzaptransfer* to yes can help you. Giorgio Incantalupo OCOSA ListAcc wrote: Hello, When I upgraded a while back the caller ID stop working I have tried everything and searched the lists no answer. Please help!! I have two pots lines coming into the Asterisk Box caller ID is set in the zapta.conf Here is what our zapata.conf looks like [channels] busydetect=1 busycount=7 relaxdtmf=yes callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes usecallerid=yes echocancel=yes echocancelwhenbridged=yes rxgain=10.5 txgain=5.5 group=1 pickupgroup=1-4 immediate=no context=bell signalling=fxs_ks callerid=asreceived channel=1 channel=2 ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk 1.2.16 - No Caller ID
I don't know where he got the bizarre useincomingcalleridonzaptransfer option, but it does not exist as you can see below: [EMAIL PROTECTED] ~]# grep useincomingcalleridonzaptransfer /home/software/asterisk/asterisk-1.2.17/configs/zapata.conf.sample [EMAIL PROTECTED] ~]# Maybe the option is specific to BRIstuff patches to Zaptel. You want the following before your FXO ports in /etc/asterisk/zapata.conf: usecallerid=yes callerid=asreceived You will also want to watch the console when a call comes in to see if there are any Caller*ID errors. OCOSA ListAcct wrote: Giorgio, That does not work it just shows up as useincomingcalleridonzaptransfer I set the following: callerid=useincomingcalleridonzaptransfer. Are you referring to something else like useincomingcalleridonzaptransfer=yes Otis Surratt Jr. / [EMAIL PROTECTED] OCOSA Communications, LLC PH: 918.585.9882 x 205 Fax: 918.585.5857 Visit Tulsa's Best Internet Data Center: http://www.ocosa.com/hosting/colo/index.asp Giorgio Incantalupo wrote: Hi, have you tried different values of callerid? Maybe setting *useincomingcalleridonzaptransfer* to yes can help you. Giorgio Incantalupo OCOSA ListAcc wrote: Hello, When I upgraded a while back the caller ID stop working I have tried everything and searched the lists no answer. Please help!! I have two pots lines coming into the Asterisk Box caller ID is set in the zapta.conf Here is what our zapata.conf looks like [channels] busydetect=1 busycount=7 relaxdtmf=yes callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes usecallerid=yes echocancel=yes echocancelwhenbridged=yes rxgain=10.5 txgain=5.5 group=1 pickupgroup=1-4 immediate=no context=bell signalling=fxs_ks callerid=asreceived channel=1 channel=2 ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk 1.2.16 - No Caller ID
Eric ManxPower Wieling wrote: I don't know where he got the bizarre useincomingcalleridonzaptransfer option, but it does not exist as you can see below: *snipped just a note, not sure if it is still in 1.4 tree, but it used to be in CVS-TRUNK as an option for chan_zap ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk 1.2.16 - No Caller ID
Richard Lyman wrote: Eric ManxPower Wieling wrote: I don't know where he got the bizarre useincomingcalleridonzaptransfer option, but it does not exist as you can see below: *snipped just a note, not sure if it is still in 1.4 tree, but it used to be in CVS-TRUNK as an option for chan_zap He is, of course, running 1.2.6. If the option exists in 1.2.x then it is not documented. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk 1.2.16 - No Caller ID
Eric ManxPower Wieling wrote: Richard Lyman wrote: Eric ManxPower Wieling wrote: I don't know where he got the bizarre useincomingcalleridonzaptransfer option, but it does not exist as you can see below: *snipped just a note, not sure if it is still in 1.4 tree, but it used to be in CVS-TRUNK as an option for chan_zap He is, of course, running 1.2.6. If the option exists in 1.2.x then it is not documented. current 1.2 tree: } else if (!strcasecmp(v-name, useincomingcalleridonzaptransfer)) { current 1.4 tree: } else if (!strcasecmp(v-name, useincomingcalleridonzaptransfer)) { current svn-trunk: } else if (!strcasecmp(v-name, useincomingcalleridonzaptransfer)) { so yep, still there, still undocumented. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk 1.2.16 - No Caller ID
Eric, I have watched the CLI before and it said nothing although I did change the position of the callerid = asreceived to right below and nothing it still shows up on the phones asterisk and in voice mail sent via e-mail unknown caller: Here is an output from a while back but it stopped so I do not know what is up. -- Starting simple switch on 'Zap/1-1' Apr 6 16:54:39 ERROR[4726]: callerid.c:276 callerid_feed: fsk_serie made mylen 0 (-92) Apr 6 16:54:39 WARNING[4726]: chan_zap.c:6255 ss_thread: CallerID feed failed: Success Apr 6 16:54:39 WARNING[4726]: chan_zap.c:6299 ss_thread: CallerID returned with error on channel 'Zap/1-1' Otis Surratt Jr. / [EMAIL PROTECTED] OCOSA Communications, LLC PH: 918.585.9882 x 205 Fax: 918.585.5857 Visit Tulsa's Best Internet Data Center: http://www.ocosa.com/hosting/colo/index.asp Eric ManxPower Wieling wrote: I don't know where he got the bizarre useincomingcalleridonzaptransfer option, but it does not exist as you can see below: [EMAIL PROTECTED] ~]# grep useincomingcalleridonzaptransfer /home/software/asterisk/asterisk-1.2.17/configs/zapata.conf.sample [EMAIL PROTECTED] ~]# Maybe the option is specific to BRIstuff patches to Zaptel. You want the following before your FXO ports in /etc/asterisk/zapata.conf: usecallerid=yes callerid=asreceived You will also want to watch the console when a call comes in to see if there are any Caller*ID errors. OCOSA ListAcct wrote: Giorgio, That does not work it just shows up as useincomingcalleridonzaptransfer I set the following: callerid=useincomingcalleridonzaptransfer. Are you referring to something else like useincomingcalleridonzaptransfer=yes Otis Surratt Jr. / [EMAIL PROTECTED] OCOSA Communications, LLC PH: 918.585.9882 x 205 Fax: 918.585.5857 Visit Tulsa's Best Internet Data Center: http://www.ocosa.com/hosting/colo/index.asp Giorgio Incantalupo wrote: Hi, have you tried different values of callerid? Maybe setting *useincomingcalleridonzaptransfer* to yes can help you. Giorgio Incantalupo OCOSA ListAcc wrote: Hello, When I upgraded a while back the caller ID stop working I have tried everything and searched the lists no answer. Please help!! I have two pots lines coming into the Asterisk Box caller ID is set in the zapta.conf Here is what our zapata.conf looks like [channels] busydetect=1 busycount=7 relaxdtmf=yes callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes usecallerid=yes echocancel=yes echocancelwhenbridged=yes rxgain=10.5 txgain=5.5 group=1 pickupgroup=1-4 immediate=no context=bell signalling=fxs_ks callerid=asreceived channel=1 channel=2 ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk 1.2.16 - No Caller ID
OCOSA ListAcc wrote: Eric, I have watched the CLI before and it said nothing although I did change the position of the callerid = asreceived to right below and nothing it still shows up on the phones asterisk and in voice mail sent via e-mail unknown caller: Here is an output from a while back but it stopped so I do not know what is up. -- Starting simple switch on 'Zap/1-1' Apr 6 16:54:39 ERROR[4726]: callerid.c:276 callerid_feed: fsk_serie made mylen 0 (-92) Apr 6 16:54:39 WARNING[4726]: chan_zap.c:6255 ss_thread: CallerID feed failed: Success Apr 6 16:54:39 WARNING[4726]: chan_zap.c:6299 ss_thread: CallerID returned with error on channel 'Zap/1-1' These errors usually indicate that your rxgain for the FXO ports is either too high or too low. Change the rxgain in /etc/asterisk/zapata.conf in increments of 2 either up or down until, but you generally don't want it to be less than -10 or greater than 10. reload chan_zap.so should apply the gain changes. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk 1.2.16 - No Caller ID
so to fix the no caller id thing will need to adjust the rx gain and tx gain? Otis Surratt Jr. / [EMAIL PROTECTED] OCOSA Communications, LLC PH: 918.585.9882 x 205 Fax: 918.585.5857 Visit Tulsa's Best Internet Data Center: http://www.ocosa.com/hosting/colo/index.asp Eric ManxPower Wieling wrote: OCOSA ListAcc wrote: Eric, I have watched the CLI before and it said nothing although I did change the position of the callerid = asreceived to right below and nothing it still shows up on the phones asterisk and in voice mail sent via e-mail unknown caller: Here is an output from a while back but it stopped so I do not know what is up. -- Starting simple switch on 'Zap/1-1' Apr 6 16:54:39 ERROR[4726]: callerid.c:276 callerid_feed: fsk_serie made mylen 0 (-92) Apr 6 16:54:39 WARNING[4726]: chan_zap.c:6255 ss_thread: CallerID feed failed: Success Apr 6 16:54:39 WARNING[4726]: chan_zap.c:6299 ss_thread: CallerID returned with error on channel 'Zap/1-1' These errors usually indicate that your rxgain for the FXO ports is either too high or too low. Change the rxgain in /etc/asterisk/zapata.conf in increments of 2 either up or down until, but you generally don't want it to be less than -10 or greater than 10. reload chan_zap.so should apply the gain changes. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk 1.2.16 - No Caller ID
Eric, Thanks when I took the rx and tx to 0.0 on both the caller id showed up I guess I will play with. My main reasoning for adjusting the rx and tx was to get rid of the echo...What other tips do you suggest or anyone out there? Thank you! Otis Surratt Jr. / [EMAIL PROTECTED] OCOSA Communications, LLC PH: 918.585.9882 x 205 Fax: 918.585.5857 Visit Tulsa's Best Internet Data Center: http://www.ocosa.com/hosting/colo/index.asp Eric ManxPower Wieling wrote: OCOSA ListAcc wrote: Eric, I have watched the CLI before and it said nothing although I did change the position of the callerid = asreceived to right below and nothing it still shows up on the phones asterisk and in voice mail sent via e-mail unknown caller: Here is an output from a while back but it stopped so I do not know what is up. -- Starting simple switch on 'Zap/1-1' Apr 6 16:54:39 ERROR[4726]: callerid.c:276 callerid_feed: fsk_serie made mylen 0 (-92) Apr 6 16:54:39 WARNING[4726]: chan_zap.c:6255 ss_thread: CallerID feed failed: Success Apr 6 16:54:39 WARNING[4726]: chan_zap.c:6299 ss_thread: CallerID returned with error on channel 'Zap/1-1' These errors usually indicate that your rxgain for the FXO ports is either too high or too low. Change the rxgain in /etc/asterisk/zapata.conf in increments of 2 either up or down until, but you generally don't want it to be less than -10 or greater than 10. reload chan_zap.so should apply the gain changes. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Asterisk 1.2.16 - No Caller ID
Hello, When I upgraded a while back the caller ID stop working I have tried everything and searched the lists no answer. Please help!! I have two pots lines coming into the Asterisk Box caller ID is set in the zapta.conf Here is what our zapata.conf looks like [channels] busydetect=1 busycount=7 relaxdtmf=yes callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes usecallerid=yes echocancel=yes echocancelwhenbridged=yes rxgain=10.5 txgain=5.5 group=1 pickupgroup=1-4 immediate=no context=bell signalling=fxs_ks callerid=asreceived channel=1 channel=2 -- Otis Surratt Jr. / [EMAIL PROTECTED] OCOSA Communications, LLC PH: 918.585.9882 x 205 Fax: 918.585.5857 Visit Tulsa's Best Internet Data Center: http://www.ocosa.com/hosting/colo/index.asp ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Asterisk internal extensions caller ID
I trying to find a way of using two different callerid numbers. I have the callerid=Agent 1 33x (in the sip.conf) being the direct dial phone number, but for internal calls I would like it to show the extension number. My internal dialplan is. exten = 3002,1,Set(CALLERID(NUM)=xxx) exten = 3002,2,Macro(stdexten,3002,SIP/3002) I know the ${EXTEN} gives me the called extension I'm dialing, but is there another for the extension that is making the call? Hope that makes sense. Thanks, Dean. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Asterisk and Japanese Caller ID
Any Luck with this? I'm getting frustrated. We need caller ID to be able to do business properly. Cheers [EMAIL PROTECTED] wrote: Actually, exactly now I am trying to do that also... Isamar On Fri, 25 Nov 2005, Aaron Anderson wrote: Are there any kind of patches or experimental libraries that I can use to pull caller ID info off a japanese pots line? ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Asterisk and Japanese Caller ID
Are there any kind of patches or experimental libraries that I can use to pull caller ID info off a japanese pots line? ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Asterisk and Japanese Caller ID
Actually, exactly now I am trying to do that also... Isamar On Fri, 25 Nov 2005, Aaron Anderson wrote: Are there any kind of patches or experimental libraries that I can use to pull caller ID info off a japanese pots line? ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Asterisk, VoiceTronix UK Caller ID
Hi All, Just a quick question, but I could really use some help on this one. I've got the CVS-Head of * installed and running, and am using a VoiceTronix OpenSwitch12 to connect to 12 analouge lines. I've got callerid activated by the Telco, and can get callerid using a std phone. However, using *, I always get an error 'Cannot decode callerid'. Does anyone know if I need to patch the vpb driver or something? Many many thanks, Ian Bonham P.S. the POTS I'm connected to is British Telecom's SystemX if thats any help? _ FREE pop-up blocking with the new MSN Toolbar - get it now! http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/ ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Asterisk, VoiceTronix UK Caller ID
On Sun, October 9, 2005 15:39, Ian Bonham said: Hi All, Just a quick question, but I could really use some help on this one. I've got the CVS-Head of * installed and running, and am using a VoiceTronix OpenSwitch12 to connect to 12 analouge lines. I've got callerid activated by the Telco, and can get callerid using a std phone. However, using *, I always get an error 'Cannot decode callerid'. Does anyone know if I need to patch the vpb driver or something? There is a patch you can apply to Asterisk, as the UK uses a different method of sending caller id than other countries. VOIP-info has a page here: http://www.voip-info.org/wiki-Asterisk+and+UK+Caller+ID There are patches here for zaptel and asterisk: http://www.lusyn.com/asterisk/patches.html -- John ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Asterisk, VoiceTronix UK Caller ID
Thanks John. I can't seem to see if just applying the Asterisk side of the fix will correct things though. The card I'm using is a VoiceTronix OpenSwitch 12. I'm using the vpb driver as opposed to the Digium drivers in this instance. Any clues? Thanks, Ian From: John Crowhurst [EMAIL PROTECTED] Reply-To: [EMAIL PROTECTED],Asterisk Users Mailing List - Non-Commercial Discussionasterisk-users@lists.digium.com To: Asterisk Users Mailing List - Non-Commercial Discussionasterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] Asterisk, VoiceTronix UK Caller ID Date: Sun, 9 Oct 2005 16:02:47 +0100 (BST) On Sun, October 9, 2005 15:39, Ian Bonham said: Hi All, Just a quick question, but I could really use some help on this one. I've got the CVS-Head of * installed and running, and am using a VoiceTronix OpenSwitch12 to connect to 12 analouge lines. I've got callerid activated by the Telco, and can get callerid using a std phone. However, using *, I always get an error 'Cannot decode callerid'. Does anyone know if I need to patch the vpb driver or something? There is a patch you can apply to Asterisk, as the UK uses a different method of sending caller id than other countries. VOIP-info has a page here: http://www.voip-info.org/wiki-Asterisk+and+UK+Caller+ID There are patches here for zaptel and asterisk: http://www.lusyn.com/asterisk/patches.html -- John ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _ Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users