Carlos Chavez escribió:
> Thank you. Unfortunately the phone Company in Mexico is not very
> helpful when it comes to those services.
>
> On Tue, 2008-05-20 at 16:48 -0500, Tilghman Lesher wrote:
>
>> On Tuesday 20 May 2008 16:08:19 Carlos Chavez wrote:
>>
>>> The problem is th
On Tue, May 20, 2008 at 6:05 PM, Carlos Chavez <[EMAIL PROTECTED]> wrote:
>Thank you. Unfortunately the phone Company in Mexico is not very
> helpful when it comes to those services.
>
> On Tue, 2008-05-20 at 16:48 -0500, Tilghman Lesher wrote:
>> On Tuesday 20 May 2008 16:08:19 Carlos Cha
On Tue, May 20, 2008 at 05:42:15PM -0300, Vin?cius Fontes wrote:
> You could simply short-circuit the two wires of the line. The telco
> will interpret that as a busy line.
Please
600 ohm, 1 watt wirewound resistor. If it's on a short loop, you might
have to go as high as 5 watts. POTS line
On Tue, 20 May 2008, Carlos Chavez wrote:
> Is there a way to busy out a Zap channel? I have a customer who is
> having problems with a line connected to a TDM800 card and we would like
> to busy out that line. Since that line is the head of the hunt group I
> cannot simply disable that ch
Just create an extension like this:
[busyoutline]
exten => 111,1,Answer()
exten => 111,n,Busy()
then drop a .call file like this:
Channel: Zap/1/111
MaxRetries: 2
RetryTime: 60
WaitTime: 30
Context: busyoutline
Extension: 111
Priority: 1
The above should work, however keep in mind if the te
Thank you. Unfortunately the phone Company in Mexico is not very
helpful when it comes to those services.
On Tue, 2008-05-20 at 16:48 -0500, Tilghman Lesher wrote:
> On Tuesday 20 May 2008 16:08:19 Carlos Chavez wrote:
> > The problem is that I do not have physical access to the ser
On Tuesday 20 May 2008 16:08:19 Carlos Chavez wrote:
> The problem is that I do not have physical access to the server. The
> other problem with that solution is that the first person to dial the
> main number will always get a busy tone and only then can someone else
> get to another line.
The problem is that I do not have physical access to the server. The
other problem with that solution is that the first person to dial the
main number will always get a busy tone and only then can someone else
get to another line.
I need to leave the line offhook until further not
You could simply short-circuit the two wires of the line. The telco will
interpret that as a busy line.
Other than that, you could do this on extensions.conf:
[context]
exten => s,1,Answer()
exten => s,n,Busy()
Att
Vinícius Fontes
Desenvolvimento
Canall Tecnologia em Comunicações Ltda.
-
Is there a way to busy out a Zap channel? I have a customer who is
having problems with a line connected to a TDM800 card and we would like
to busy out that line. Since that line is the head of the hunt group I
cannot simply disable that channel, I need to busy the line so calls
will come
10 matches
Mail list logo