Re: [asterisk-users] Can't compile DAHDI - wrong kernel source
Hello What will be your exact kernel version. Give me output uname -a command. -- Regards, Chandrakant Solanki On Thu, Jul 15, 2010 at 6:58 AM, Thermal Wetland thermalwetl...@gmail.comwrote: On Wed, Jul 14, 2010 at 4:55 AM, bruce bruce bruceb...@gmail.com wrote: I am stuck with the same problem but I have used asterisk yum repository and it worked by itself without me worrying for kernel stuff. However, I need to install speex codec and now I am stuck as it doesn't get picked up by the yum asterisk install somehow. I have lib speex and speex already installed and when doing yum install asterisk16 I don't see speex in core show translation Is there anything specific I have to do? Do I have to build from source as well? -Sorry, didn't mean to hijack the thread. Thanks, Bruce On Wed, Jul 14, 2010 at 5:08 AM, Chandrakant Solanki solanki.chandrak...@gmail.com wrote: Hi If you install rpm from any location it goes to its default location. You just go for above steps. For kernel you can go for http://kernel.org -- Regards, Chandrakant Solanki On Wed, Jul 14, 2010 at 2:06 PM, liuxin nyliuxin...@gmail.com wrote: Hi. The best easy way is: copy kernel-devel-2.6.18-028stab064.7.rpm to /usr/src then run rpm -ivh kernel-devel-2.6.18-028stab064.7.rpm 2010/7/14 Gareth Blades list-aster...@skycomuk.com Thermal Wetland wrote: I have a virtual server with godaddy but can not compile DAHDI as it complains that I do not have the correct kernel source. The package installed is - kernel-devel-2.6.18-164.11.1.el5.i686: Package kernel-devel-2.6.18-164.11.1.el5.i686 already installed and latest version Nothing to do uname -a returns: Linux ip-XXX-XXX-XXX-XXX.ip.secureserver.net http://ip-XXX-XXX-XXX-XXX.ip.secureserver.net 2.6.18-028stab064.7 #1 SMP Wed Aug 26 13:11:07 MSD 2009 i686 i686 i386 GNU/Linux When I try to compile DAHDI it fails with: make[2]: Leaving directory `/usr/src/asterisk/dahdi-linux-complete-2.3.0.1+2.3.0/linux/drivers/dahdi/firmware' You do not appear to have the sources for the 2.6.18-028stab064.7 kernel installed. Is there a way to trick DAHDI to use the installed kernel? Thanks for the help! -- -Thermal What kernel versions do you have installed? If you are currently running an older kernel but installed a newer kernel and sources but havent rebooted to activate the new one yet then it may still be trying to locate the source for the older running kernel. I was able to download the rpm's and install them: [r...@ip-97-74-119-59 src]# rpm -ivh ovzkernel-2.6.18-128.2.1.el5.028stab064.7.i686.rpm warning: ovzkernel-2.6.18-128.2.1.el5.028stab064.7.i686.rpm: Header V3 DSA signature: NOKEY, key ID a7a1d4b6 Preparing...### [100%] package ovzkernel-2.6.18-128.2.1.el5.028stab064.7.i686 is already installed [r...@ip-97-74-119-59 src]# rpm -ivh ovzkernel-devel-2.6.18-128.2.1.el5.028stab064.7.i686.rpm warning: ovzkernel-devel-2.6.18-128.2.1.el5.028stab064.7.i686.rpm: Header V3 DSA signature: NOKEY, key ID a7a1d4b6 Preparing...### [100%] package ovzkernel-devel-2.6.18-128.2.1.el5.028stab064.7.i686 is already installed [r...@ip-97-74-119-59 src]# cd - /usr/src/asterisk/dahdi-linux-complete-2.3.0.1+2.3.0 [r...@ip-97-74-119-59 dahdi-linux-complete-2.3.0.1+2.3.0]# make all make -C linux all make[1]: Entering directory `/usr/src/asterisk/dahdi-linux-complete-2.3.0.1+2.3.0/linux' make -C drivers/dahdi/firmware firmware-loaders make[2]: Entering directory `/usr/src/asterisk/dahdi-linux-complete-2.3.0.1+2.3.0/linux/drivers/dahdi/firmware' make[2]: Leaving directory `/usr/src/asterisk/dahdi-linux-complete-2.3.0.1+2.3.0/linux/drivers/dahdi/firmware' You do not appear to have the sources for the 2.6.18-028stab064.7 kernel installed. make[1]: *** [modules] Error 1 make[1]: Leaving directory `/usr/src/asterisk/dahdi-linux-complete-2.3.0.1+2.3.0/linux' make: *** [all] Error 2 The directories in /usr/src/kernels is: [r...@ip-97-74-119-59 kernels]# ls -l total 51328 drwxr-xr-x 20 root root 4096 Jul 14 18:04 2.6.18-128.2.1.el5.028stab064.7-i686 drwxr-xr-x 19 root root 4096 Jul 13 20:25 2.6.18-164.11.1.el5-i686 drwxrwxr-x 19 root root 4096 Feb 23 2007 linux-2.6.18.8 I tried to install the kernel from source but couldn't find the exact kernel, I installed linux-2.6.18.8 as I was the closest. Both of the directories in /usr/src/kernels/ have the -i686 suffix, is that the issue? -- -Thermal -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing
Re: [asterisk-users] Can't compile DAHDI - wrong kernel source
On Wed, Jul 14, 2010 at 8:09 PM, Chandrakant Solanki solanki.chandrak...@gmail.com wrote: Hello What will be your exact kernel version. Give me output uname -a command. -- Regards, Chandrakant Solanki Thank you for the help! Here is the output: [r...@ip-97-74-119-59 ~]# uname -a Linux ip-97-74-119-59.ip.secureserver.net 2.6.18-028stab064.7 #1 SMP Wed Aug 26 13:11:07 MSD 2009 i686 i686 i386 GNU/Linux -Thermal -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Can't compile DAHDI - wrong kernel source
Hi Following steps to do... 1] # cd /usr/src/kernels/ 2] # ln -s 2.6.18-128.2.1.el5.028stab064.7-i686 2.6.18-028stab064.7 Try this 'n let me know... Hope this will work fine... -- Regards, Chandrakant Solanki On Thu, Jul 15, 2010 at 12:00 PM, Thermal Wetland thermalwetl...@gmail.comwrote: On Wed, Jul 14, 2010 at 8:09 PM, Chandrakant Solanki solanki.chandrak...@gmail.com wrote: Hello What will be your exact kernel version. Give me output uname -a command. -- Regards, Chandrakant Solanki Thank you for the help! Here is the output: [r...@ip-97-74-119-59 ~]# uname -a Linux ip-97-74-119-59.ip.secureserver.net 2.6.18-028stab064.7 #1 SMP Wed Aug 26 13:11:07 MSD 2009 i686 i686 i386 GNU/Linux -Thermal -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Can't compile DAHDI - wrong kernel source
On Wed, Jul 14, 2010 at 8:43 PM, Chandrakant Solanki solanki.chandrak...@gmail.com wrote: Hi Following steps to do... 1] # cd /usr/src/kernels/ 2] # ln -s 2.6.18-128.2.1.el5.028stab064.7-i686 2.6.18-028stab064.7 Try this 'n let me know... Hope this will work fine... Seems like that should have worked! [r...@ip-97-74-119-59 kernels]# ls -l total 117492 drwxr-xr-x 21 root root 4096 Jul 14 18:40 2.6.18-128.2.1.el5.028stab064.7-i686 drwxr-xr-x 19 root root 4096 Jul 14 19:35 2.6.18-164.11.1.el5-PAE-i686 drwxr-xr-x 19 root root 4096 Jul 14 19:36 2.6.18-164.11.1.el5-debug-i686 drwxr-xr-x 19 root root 4096 Jul 13 20:25 2.6.18-164.11.1.el5-i686 drwxr-xr-x 19 root root 4096 Jul 14 19:36 2.6.18-164.11.1.el5-xen-i686 lrwxrwxrwx 1 root root 28 Jul 14 19:35 2.6.18-164.11.1.el5PAE-i686 - 2.6.18-164.11.1.el5-PAE-i686 lrwxrwxrwx 1 root root 30 Jul 14 19:36 2.6.18-164.11.1.el5debug-i686 - 2.6.18-164.11.1.el5-debug-i686 lrwxrwxrwx 1 root root 28 Jul 14 19:36 2.6.18-164.11.1.el5xen-i686 - 2.6.18-164.11.1.el5-xen-i686 drwxrwxr-x 20 root root 4096 Jul 14 18:45 linux-2.6.18.8 -rw-r--r-- 1 root root 52488302 Jul 14 18:16 linux-2.6.18.8.tar.gz drwxrwxr-x 24 root root 4096 Jul 14 19:05 linux-2.6.34.1 -rw-r--r-- 1 root root 67658955 Jul 5 11:27 linux-2.6.34.1.tar.bz2 [r...@ip-97-74-119-59 kernels]# ln -s 2.6.18-128.2.1.el5.028stab064.7-i686 2.6.18-028stab064.7 [r...@ip-97-74-119-59 kernels]# ls -l total 117492 lrwxrwxrwx 1 root root 36 Jul 15 00:03 2.6.18-028stab064.7 - 2.6.18-128.2.1.el5.028stab064.7-i686 drwxr-xr-x 21 root root 4096 Jul 14 18:40 2.6.18-128.2.1.el5.028stab064.7-i686 drwxr-xr-x 19 root root 4096 Jul 14 19:35 2.6.18-164.11.1.el5-PAE-i686 drwxr-xr-x 19 root root 4096 Jul 14 19:36 2.6.18-164.11.1.el5-debug-i686 drwxr-xr-x 19 root root 4096 Jul 13 20:25 2.6.18-164.11.1.el5-i686 drwxr-xr-x 19 root root 4096 Jul 14 19:36 2.6.18-164.11.1.el5-xen-i686 lrwxrwxrwx 1 root root 28 Jul 14 19:35 2.6.18-164.11.1.el5PAE-i686 - 2.6.18-164.11.1.el5-PAE-i686 lrwxrwxrwx 1 root root 30 Jul 14 19:36 2.6.18-164.11.1.el5debug-i686 - 2.6.18-164.11.1.el5-debug-i686 lrwxrwxrwx 1 root root 28 Jul 14 19:36 2.6.18-164.11.1.el5xen-i686 - 2.6.18-164.11.1.el5-xen-i686 drwxrwxr-x 20 root root 4096 Jul 14 18:45 linux-2.6.18.8 -rw-r--r-- 1 root root 52488302 Jul 14 18:16 linux-2.6.18.8.tar.gz drwxrwxr-x 24 root root 4096 Jul 14 19:05 linux-2.6.34.1 -rw-r--r-- 1 root root 67658955 Jul 5 11:27 linux-2.6.34.1.tar.bz2 [r...@ip-97-74-119-59 kernels]# cd /usr/src/asterisk/dahdi-linux-complete-2.3.0.1+2.3.0/ [r...@ip-97-74-119-59 dahdi-linux-complete-2.3.0.1+2.3.0]# make all make -C linux all make[1]: Entering directory `/usr/src/asterisk/dahdi-linux-complete-2.3.0.1+2.3.0/linux' make -C drivers/dahdi/firmware firmware-loaders make[2]: Entering directory `/usr/src/asterisk/dahdi-linux-complete-2.3.0.1+2.3.0/linux/drivers/dahdi/firmware' make[2]: Leaving directory `/usr/src/asterisk/dahdi-linux-complete-2.3.0.1+2.3.0/linux/drivers/dahdi/firmware' You do not appear to have the sources for the 2.6.18-028stab064.7 kernel installed. make[1]: *** [modules] Error 1 make[1]: Leaving directory `/usr/src/asterisk/dahdi-linux-complete-2.3.0.1+2.3.0/linux' make: *** [all] Error 2 [r...@ip-97-74-119-59 dahdi-linux-complete-2.3.0.1+2.3.0]# -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Can't compile DAHDI - wrong kernel source
On Wed, Jul 14, 2010 at 8:43 PM, Chandrakant Solanki solanki.chandrak...@gmail.com wrote: Hi Following steps to do... 1] # cd /usr/src/kernels/ 2] # ln -s 2.6.18-128.2.1.el5.028stab064.7-i686 2.6.18-028stab064.7 Try this 'n let me know... Hope this will work fine... -- Regards, Chandrakant Solanki Chandrakant, Are you curious enough to want shell access to take look? I am going to blow this away and start again once I learn the secret! I have done so much experimenting. -Thermal -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Can't compile DAHDI - wrong kernel source
On Wed, Jul 14, 2010 at 8:43 PM, Chandrakant Solanki solanki.chandrak...@gmail.com wrote: Hi Following steps to do... 1] # cd /usr/src/kernels/ 2] # ln -s 2.6.18-128.2.1.el5.028stab064.7-i686 2.6.18-028stab064.7 Try this 'n let me know... Hope this will work fine... -- Regards, Chandrakant Solanki I have all the extra kernels because I ran 'yum install kernel*' Could that be the issue? -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Can't compile DAHDI - wrong kernel source
On Wed, Jul 14, 2010 at 03:28:35PM -1000, Thermal Wetland wrote: I was able to download the rpm's and install them: [r...@ip-97-74-119-59 src]# rpm -ivh ovzkernel-2.6.18-128.2.1.el5.028stab064.7.i686.rpm warning: ovzkernel-2.6.18-128.2.1.el5.028stab064.7.i686.rpm: Header V3 DSA signature: NOKEY, key ID a7a1d4b6 Preparing... ### [100%] package ovzkernel-2.6.18-128.2.1.el5.028stab064.7.i686 is already installed You do not appear to have the sources for the 2.6.18-028stab064.7 kernel installed. make[1]: *** [modules] Error 1 make[1]: Leaving directory `/usr/src/asterisk/dahdi-linux-complete-2.3.0.1+2.3.0/linux' make: *** [all] Error 2 The directories in /usr/src/kernels is: [r...@ip-97-74-119-59 kernels]# ls -l total 51328 drwxr-xr-x 20 root root 4096 Jul 14 18:04 2.6.18-128.2.1.el5.028stab064.7-i686 drwxr-xr-x 19 root root 4096 Jul 13 20:25 2.6.18-164.11.1.el5-i686 drwxrwxr-x 19 root root 4096 Feb 23 2007 linux-2.6.18.8 I tried to install the kernel from source but couldn't find the exact kernel, I installed linux-2.6.18.8 as I was the closest. Both of the directories in /usr/src/kernels/ have the -i686 suffix, is that the issue? No. The DAHDI Makefile looks for the kernel source by default in: /lib/modules/`uname -r`/build This is normally a symlink that points to the directory with the (possibly partial) kernel source tree. It seems that the kernel package you have installed did not set up this symlink. You can create it yourself. Alternatively, set set KSRC explicitly to the (full path to) the kernel tree: make KSRC=/usr/src/whatever -- Tzafrir Cohen icq#16849755 jabber:tzafrir.co...@xorcom.com +972-50-7952406 mailto:tzafrir.co...@xorcom.com http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Can't compile DAHDI - wrong kernel source
Try also installing the devel version of your kernel. I manage to find the link below: http://download.openvz.org/kernel/branches/rhel5-2.6.18/028stab064.7/ovzkernel-devel-2.6.18-128.2.1.el5.028stab064.7.i686.rpm Try installing it and then recompile the dahdi module. Hope this helps. -- Mac - Original Message From: Tzafrir Cohen tzafrir.co...@xorcom.com To: asterisk-users@lists.digium.com Sent: Thursday, July 15, 2010 5:34:41 PM Subject: Re: [asterisk-users] Can't compile DAHDI - wrong kernel source On Wed, Jul 14, 2010 at 03:28:35PM -1000, Thermal Wetland wrote: I was able to download the rpm's and install them: [r...@ip-97-74-119-59 src]# rpm -ivh ovzkernel-2.6.18-128.2.1.el5.028stab064.7.i686.rpm warning: ovzkernel-2.6.18-128.2.1.el5.028stab064.7.i686.rpm: Header V3 DSA signature: NOKEY, key ID a7a1d4b6 Preparing...### [100%] package ovzkernel-2.6.18-128.2.1.el5.028stab064.7.i686 is already installed You do not appear to have the sources for the 2.6.18-028stab064.7 kernel installed. make[1]: *** [modules] Error 1 make[1]: Leaving directory `/usr/src/asterisk/dahdi-linux-complete-2.3.0.1+2.3.0/linux' make: *** [all] Error 2 The directories in /usr/src/kernels is: [r...@ip-97-74-119-59 kernels]# ls -l total 51328 drwxr-xr-x 20 root root 4096 Jul 14 18:04 2.6.18-128.2.1.el5.028stab064.7-i686 drwxr-xr-x 19 root root 4096 Jul 13 20:25 2.6.18-164.11.1.el5-i686 drwxrwxr-x 19 root root 4096 Feb 23 2007 linux-2.6.18.8 I tried to install the kernel from source but couldn't find the exact kernel, I installed linux-2.6.18.8 as I was the closest. Both of the directories in /usr/src/kernels/ have the -i686 suffix, is that the issue? No. The DAHDI Makefile looks for the kernel source by default in: /lib/modules/`uname -r`/build This is normally a symlink that points to the directory with the (possibly partial) kernel source tree. It seems that the kernel package you have installed did not set up this symlink. You can create it yourself. Alternatively, set set KSRC explicitly to the (full path to) the kernel tree: make KSRC=/usr/src/whatever -- Tzafrir Cohen icq#16849755 jabber:tzafrir.co...@xorcom.com +972-50-7952406 mailto:tzafrir.co...@xorcom.com http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Can't compile DAHDI - wrong kernel source
El 15/07/10 04:34, Tzafrir Cohen escribió: On Wed, Jul 14, 2010 at 03:28:35PM -1000, Thermal Wetland wrote: I was able to download the rpm's and install them: [r...@ip-97-74-119-59 src]# rpm -ivh ovzkernel-2.6.18-128.2.1.el5.028stab064.7.i686.rpm warning: ovzkernel-2.6.18-128.2.1.el5.028stab064.7.i686.rpm: Header V3 DSA signature: NOKEY, key ID a7a1d4b6 Preparing...### [100%] package ovzkernel-2.6.18-128.2.1.el5.028stab064.7.i686 is already installed You do not appear to have the sources for the 2.6.18-028stab064.7 kernel installed. make[1]: *** [modules] Error 1 make[1]: Leaving directory `/usr/src/asterisk/dahdi-linux-complete-2.3.0.1+2.3.0/linux' make: *** [all] Error 2 The directories in /usr/src/kernels is: [r...@ip-97-74-119-59 kernels]# ls -l total 51328 drwxr-xr-x 20 root root 4096 Jul 14 18:04 2.6.18-128.2.1.el5.028stab064.7-i686 drwxr-xr-x 19 root root 4096 Jul 13 20:25 2.6.18-164.11.1.el5-i686 drwxrwxr-x 19 root root 4096 Feb 23 2007 linux-2.6.18.8 I tried to install the kernel from source but couldn't find the exact kernel, I installed linux-2.6.18.8 as I was the closest. Both of the directories in /usr/src/kernels/ have the -i686 suffix, is that the issue? No. The DAHDI Makefile looks for the kernel source by default in: /lib/modules/`uname -r`/build This is normally a symlink that points to the directory with the (possibly partial) kernel source tree. It seems that the kernel package you have installed did not set up this symlink. You can create it yourself. Alternatively, set set KSRC explicitly to the (full path to) the kernel tree: make KSRC=/usr/src/whatever That is the definitive solution, I had the same issue in an openvz VPS and finally solved it by manually making the symlink to the kernel sources: [r...@virtual1_ast1 modules]# uname -a Linux virtual1_ast1 2.6.18-194.3.1.el5.028stab069.6 #1 SMP Wed May 26 19:05:45 MSD 2010 i686 i686 i386 GNU/Linux [r...@virtual1_ast1 modules]# pwd /lib/modules [r...@virtual1_ast1 modules]# ls -lh total 8,0K drwxr-xr-x 3 root root 4,0K jun 30 18:42 2.6.18-194.3.1.el5.028stab069.6 drwxr-xr-x 3 root root 4,0K jun 30 18:09 2.6.18-194.3.1.el5.028stab069.6ent [r...@virtual1_ast1 2.6.18-194.3.1.el5.028stab069.6]# pwd /lib/modules/2.6.18-194.3.1.el5.028stab069.6 [r...@virtual1_ast1 2.6.18-194.3.1.el5.028stab069.6]# ls -lh total 44K lrwxrwxrwx 1 root root 57 jun 30 18:07 build - /usr/src/kernels/2.6.18-194.3.1.el5.028stab069.6ent-i686/ I had to create the folder with the kernel name in /lib/modules/ and inside it, the build symlink to the kernel sources, just as I saw it on a physical server. That way it worked compiling DAHDI. I didn't know about explicitly setting the KSRC to the kernel sources. Thanks for the hint. Cheers, -- Ing. Miguel Molina Grupo de Tecnología Millenium Phone Center -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Can't compile DAHDI - wrong kernel source
On Wed, Jul 14, 2010 at 11:34 PM, Tzafrir Cohen tzafrir.co...@xorcom.com wrote: The DAHDI Makefile looks for the kernel source by default in: /lib/modules/`uname -r`/build This is normally a symlink that points to the directory with the (possibly partial) kernel source tree. It seems that the kernel package you have installed did not set up this symlink. You can create it yourself. Alternatively, set set KSRC explicitly to the (full path to) the kernel tree: make KSRC=/usr/src/whatever -- Tzafrir Cohen icq#16849755 jabber:tzafrir.co...@xorcom.com +972-50-7952406 mailto:tzafrir.co...@xorcom.com http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir Creating the link was the answer! Even when I installed the RPM the link in /lib/modules was not created. After make all, make install, and make config DAHDI will not start. in the /drivers/dahdi folder I only have dahdi_dummy.c All the other files have .ko .mod.c .o etc Is this related? [r...@ip-97-74-119-59 dahdi-linux-complete-2.3.0.1+2.3.0]# dahdi_cfg -v DAHDI Tools Version - 2.3.0 Notice: Configuration file is /etc/dahdi/system.conf line 0: Unable to open master device '/dev/dahdi/ctl' 1 error(s) detected The only warning I see is WARNING: could not find /usr/src/asterisk/dahdi-linux-complete-2.3.0.1+2.3.0/linux/drivers/dahdi/vpmadt032_loader/.vpmadt032_x86_32.o.cmd for /usr/src/asterisk/dahdi-linux-complete-2.3.0.1+2.3.0/linux/drivers/dahdi/vpmadt032_loader/vpmadt032_x86_32.o Does that ring a bell with any one? -- -Thermal -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Can't compile DAHDI - wrong kernel source
El 15/07/10 15:15, Thermal Wetland escribió: On Wed, Jul 14, 2010 at 11:34 PM, Tzafrir Cohen tzafrir.co...@xorcom.com wrote: The DAHDI Makefile looks for the kernel source by default in: /lib/modules/`uname -r`/build This is normally a symlink that points to the directory with the (possibly partial) kernel source tree. It seems that the kernel package you have installed did not set up this symlink. You can create it yourself. Alternatively, set set KSRC explicitly to the (full path to) the kernel tree: make KSRC=/usr/src/whatever -- Tzafrir Cohen icq#16849755 jabber:tzafrir.co...@xorcom.com +972-50-7952406 mailto:tzafrir.co...@xorcom.com http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir Creating the link was the answer! Even when I installed the RPM the link in /lib/modules was not created. After make all, make install, and make config DAHDI will not start. in the /drivers/dahdi folder I only have dahdi_dummy.c All the other files have .ko .mod.c .o etc Is this related? [r...@ip-97-74-119-59 dahdi-linux-complete-2.3.0.1+2.3.0]# dahdi_cfg -v DAHDI Tools Version - 2.3.0 Notice: Configuration file is /etc/dahdi/system.conf line 0: Unable to open master device '/dev/dahdi/ctl' 1 error(s) detected The only warning I see is WARNING: could not find /usr/src/asterisk/dahdi-linux-complete-2.3.0.1+2.3.0/linux/drivers/dahdi/vpmadt032_loader/.vpmadt032_x86_32.o.cmd for /usr/src/asterisk/dahdi-linux-complete-2.3.0.1+2.3.0/linux/drivers/dahdi/vpmadt032_loader/vpmadt032_x86_32.o Does that ring a bell with any one? I experienced the same issue, and googling about this, on some openvz documentation they are clear: for security you can't enable kernel modules in an openVZ VPS (you can't even do a lsmod, it shows nothing), the only way I could use DAHDI timing in my case for asterisk inside a VPS, was to install DAHDI in the HN (Hardware Node) and share it using this config settings: vzctl set 101 --devnodes 'dahdi/pseudo:rw dahdi/channel:rw dahdi/timer:rw dahdi/ctl:rw' --save Where 101 is your CTID (container ID). Look at http://forum.openvz.org/index.php?t=msggoto=37706; That way I made it! Now I have a single DAHDI instance in the HN shared into two VPS, and dahdi_cfg and dahdi_test works great: [r...@virtual1_ast1 ~]# dahdi_test Opened pseudo dahdi interface, measuring accuracy... 99.951% 99.641% 99.572% 99.604% 99.671% 99.972% 99.979% 99.991% --- Results after 8 passes --- Best: 99.991 -- Worst: 99.572 -- Average: 99.797645, Difference: 99.998742 The DAHDI timing is used without issue by asterisk: virtual1_ast1*CLI module show like timing Module Description Use Count res_timing_dahdi.soDAHDI Timing Interface 484 res_timing_pthread.so pthread Timing Interface 0 virtual1_ast1*CLI timing test Attempting to test a timer with 50 ticks per second. Using the 'DAHDI' timing module for this test. It has been 1016 milliseconds, and we got 51 timer ticks My goal was to provide DAHDI timing to asterisk inside a VPS. I don't know if having a TDM card in the HN configured with DAHDI it can be shared so a VPS can access it and then you could receive PRI calls or something directly into a VPS, or better, split channel groups between VPS. Cheers, -- Ing. Miguel Molina Grupo de Tecnología Millenium Phone Center -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Can't compile DAHDI - wrong kernel source
On Thu, Jul 15, 2010 at 11:29 AM, Miguel Molina mmol...@millenium.com.co wrote: El 15/07/10 15:15, Thermal Wetland escribió: On Wed, Jul 14, 2010 at 11:34 PM, Tzafrir Cohen tzafrir.co...@xorcom.com wrote: The DAHDI Makefile looks for the kernel source by default in: /lib/modules/`uname -r`/build This is normally a symlink that points to the directory with the (possibly partial) kernel source tree. It seems that the kernel package you have installed did not set up this symlink. You can create it yourself. Alternatively, set set KSRC explicitly to the (full path to) the kernel tree: make KSRC=/usr/src/whatever -- Tzafrir Cohen icq#16849755 jabber:tzafrir.co...@xorcom.com +972-50-7952406 mailto:tzafrir.co...@xorcom.com http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir Creating the link was the answer! Even when I installed the RPM the link in /lib/modules was not created. After make all, make install, and make config DAHDI will not start. in the /drivers/dahdi folder I only have dahdi_dummy.c All the other files have .ko .mod.c .o etc Is this related? [r...@ip-97-74-119-59 dahdi-linux-complete-2.3.0.1+2.3.0]# dahdi_cfg -v DAHDI Tools Version - 2.3.0 Notice: Configuration file is /etc/dahdi/system.conf line 0: Unable to open master device '/dev/dahdi/ctl' 1 error(s) detected The only warning I see is WARNING: could not find /usr/src/asterisk/dahdi-linux-complete-2.3.0.1+2.3.0/linux/drivers/dahdi/vpmadt032_loader/.vpmadt032_x86_32.o.cmd for /usr/src/asterisk/dahdi-linux-complete-2.3.0.1+2.3.0/linux/drivers/dahdi/vpmadt032_loader/vpmadt032_x86_32.o Does that ring a bell with any one? I experienced the same issue, and googling about this, on some openvz documentation they are clear: for security you can't enable kernel modules in an openVZ VPS (you can't even do a lsmod, it shows nothing), the only way I could use DAHDI timing in my case for asterisk inside a VPS, was to install DAHDI in the HN (Hardware Node) and share it using this config settings: vzctl set 101 --devnodes 'dahdi/pseudo:rw dahdi/channel:rw dahdi/timer:rw dahdi/ctl:rw' --save Where 101 is your CTID (container ID). Look at http://forum.openvz.org/index.php?t=msggoto=37706; That way I made it! Now I have a single DAHDI instance in the HN shared into two VPS, and dahdi_cfg and dahdi_test works great: [r...@virtual1_ast1 ~]# dahdi_test Opened pseudo dahdi interface, measuring accuracy... 99.951% 99.641% 99.572% 99.604% 99.671% 99.972% 99.979% 99.991% --- Results after 8 passes --- Best: 99.991 -- Worst: 99.572 -- Average: 99.797645, Difference: 99.998742 The DAHDI timing is used without issue by asterisk: virtual1_ast1*CLI module show like timing Module Description Use Count res_timing_dahdi.so DAHDI Timing Interface 484 res_timing_pthread.so pthread Timing Interface 0 virtual1_ast1*CLI timing test Attempting to test a timer with 50 ticks per second. Using the 'DAHDI' timing module for this test. It has been 1016 milliseconds, and we got 51 timer ticks My goal was to provide DAHDI timing to asterisk inside a VPS. I don't know if having a TDM card in the HN configured with DAHDI it can be shared so a VPS can access it and then you could receive PRI calls or something directly into a VPS, or better, split channel groups between VPS. Cheers, -- Ing. Miguel Molina Grupo de Tecnología Millenium Phone Center Thank you Miguel for the openVZ help! -- -Thermal -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Can't compile DAHDI - wrong kernel source
Thermal Wetland wrote: I have a virtual server with godaddy but can not compile DAHDI as it complains that I do not have the correct kernel source. The package installed is - kernel-devel-2.6.18-164.11.1.el5.i686: Package kernel-devel-2.6.18-164.11.1.el5.i686 already installed and latest version Nothing to do uname -a returns: Linux ip-XXX-XXX-XXX-XXX.ip.secureserver.net http://ip-XXX-XXX-XXX-XXX.ip.secureserver.net 2.6.18-028stab064.7 #1 SMP Wed Aug 26 13:11:07 MSD 2009 i686 i686 i386 GNU/Linux When I try to compile DAHDI it fails with: make[2]: Leaving directory `/usr/src/asterisk/dahdi-linux-complete-2.3.0.1+2.3.0/linux/drivers/dahdi/firmware' You do not appear to have the sources for the 2.6.18-028stab064.7 kernel installed. Is there a way to trick DAHDI to use the installed kernel? Thanks for the help! -- -Thermal What kernel versions do you have installed? If you are currently running an older kernel but installed a newer kernel and sources but havent rebooted to activate the new one yet then it may still be trying to locate the source for the older running kernel. -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Can't compile DAHDI - wrong kernel source
Hi. The best easy way is: copy kernel-devel-2.6.18-028stab064.7.rpm to /usr/src then run rpm -ivh kernel-devel-2.6.18-028stab064.7.rpm 2010/7/14 Gareth Blades list-aster...@skycomuk.com Thermal Wetland wrote: I have a virtual server with godaddy but can not compile DAHDI as it complains that I do not have the correct kernel source. The package installed is - kernel-devel-2.6.18-164.11.1.el5.i686: Package kernel-devel-2.6.18-164.11.1.el5.i686 already installed and latest version Nothing to do uname -a returns: Linux ip-XXX-XXX-XXX-XXX.ip.secureserver.nethttp://ip-xxx-xxx-xxx-xxx.ip.secureserver.net/ http://ip-XXX-XXX-XXX-XXX.ip.secureserver.nethttp://ip-xxx-xxx-xxx-xxx.ip.secureserver.net/ 2.6.18-028stab064.7 #1 SMP Wed Aug 26 13:11:07 MSD 2009 i686 i686 i386 GNU/Linux When I try to compile DAHDI it fails with: make[2]: Leaving directory `/usr/src/asterisk/dahdi-linux-complete-2.3.0.1+2.3.0/linux/drivers/dahdi/firmware' You do not appear to have the sources for the 2.6.18-028stab064.7 kernel installed. Is there a way to trick DAHDI to use the installed kernel? Thanks for the help! -- -Thermal What kernel versions do you have installed? If you are currently running an older kernel but installed a newer kernel and sources but havent rebooted to activate the new one yet then it may still be trying to locate the source for the older running kernel. -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Can't compile DAHDI - wrong kernel source
Hi Check your kernel version using *uname -r *and then try to download tar.gz setup for that version. And extract it into /usr/src/kernels directory , then try to compile. -- Regards, Chandrakant Solanki On Wed, Jul 14, 2010 at 1:46 PM, Gareth Blades list-aster...@skycomuk.comwrote: Thermal Wetland wrote: I have a virtual server with godaddy but can not compile DAHDI as it complains that I do not have the correct kernel source. The package installed is - kernel-devel-2.6.18-164.11.1.el5.i686: Package kernel-devel-2.6.18-164.11.1.el5.i686 already installed and latest version Nothing to do uname -a returns: Linux ip-XXX-XXX-XXX-XXX.ip.secureserver.net http://ip-XXX-XXX-XXX-XXX.ip.secureserver.net 2.6.18-028stab064.7 #1 SMP Wed Aug 26 13:11:07 MSD 2009 i686 i686 i386 GNU/Linux When I try to compile DAHDI it fails with: make[2]: Leaving directory `/usr/src/asterisk/dahdi-linux-complete-2.3.0.1+2.3.0/linux/drivers/dahdi/firmware' You do not appear to have the sources for the 2.6.18-028stab064.7 kernel installed. Is there a way to trick DAHDI to use the installed kernel? Thanks for the help! -- -Thermal What kernel versions do you have installed? If you are currently running an older kernel but installed a newer kernel and sources but havent rebooted to activate the new one yet then it may still be trying to locate the source for the older running kernel. -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Can't compile DAHDI - wrong kernel source
Hi If you install rpm from any location it goes to its default location. You just go for above steps. For kernel you can go for http://kernel.org -- Regards, Chandrakant Solanki On Wed, Jul 14, 2010 at 2:06 PM, liuxin nyliuxin...@gmail.com wrote: Hi. The best easy way is: copy kernel-devel-2.6.18-028stab064.7.rpm to /usr/src then run rpm -ivh kernel-devel-2.6.18-028stab064.7.rpm 2010/7/14 Gareth Blades list-aster...@skycomuk.com Thermal Wetland wrote: I have a virtual server with godaddy but can not compile DAHDI as it complains that I do not have the correct kernel source. The package installed is - kernel-devel-2.6.18-164.11.1.el5.i686: Package kernel-devel-2.6.18-164.11.1.el5.i686 already installed and latest version Nothing to do uname -a returns: Linux ip-XXX-XXX-XXX-XXX.ip.secureserver.nethttp://ip-xxx-xxx-xxx-xxx.ip.secureserver.net/ http://ip-XXX-XXX-XXX-XXX.ip.secureserver.nethttp://ip-xxx-xxx-xxx-xxx.ip.secureserver.net/ 2.6.18-028stab064.7 #1 SMP Wed Aug 26 13:11:07 MSD 2009 i686 i686 i386 GNU/Linux When I try to compile DAHDI it fails with: make[2]: Leaving directory `/usr/src/asterisk/dahdi-linux-complete-2.3.0.1+2.3.0/linux/drivers/dahdi/firmware' You do not appear to have the sources for the 2.6.18-028stab064.7 kernel installed. Is there a way to trick DAHDI to use the installed kernel? Thanks for the help! -- -Thermal What kernel versions do you have installed? If you are currently running an older kernel but installed a newer kernel and sources but havent rebooted to activate the new one yet then it may still be trying to locate the source for the older running kernel. -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Can't compile DAHDI - wrong kernel source
I am stuck with the same problem but I have used asterisk yum repository and it worked by itself without me worrying for kernel stuff. However, I need to install speex codec and now I am stuck as it doesn't get picked up by the yum asterisk install somehow. I have lib speex and speex already installed and when doing yum install asterisk16 I don't see speex in core show translation Is there anything specific I have to do? Do I have to build from source as well? -Sorry, didn't mean to hijack the thread. Thanks, Bruce On Wed, Jul 14, 2010 at 5:08 AM, Chandrakant Solanki solanki.chandrak...@gmail.com wrote: Hi If you install rpm from any location it goes to its default location. You just go for above steps. For kernel you can go for http://kernel.org -- Regards, Chandrakant Solanki On Wed, Jul 14, 2010 at 2:06 PM, liuxin nyliuxin...@gmail.com wrote: Hi. The best easy way is: copy kernel-devel-2.6.18-028stab064.7.rpm to /usr/src then run rpm -ivh kernel-devel-2.6.18-028stab064.7.rpm 2010/7/14 Gareth Blades list-aster...@skycomuk.com Thermal Wetland wrote: I have a virtual server with godaddy but can not compile DAHDI as it complains that I do not have the correct kernel source. The package installed is - kernel-devel-2.6.18-164.11.1.el5.i686: Package kernel-devel-2.6.18-164.11.1.el5.i686 already installed and latest version Nothing to do uname -a returns: Linux ip-XXX-XXX-XXX-XXX.ip.secureserver.nethttp://ip-xxx-xxx-xxx-xxx.ip.secureserver.net/ http://ip-XXX-XXX-XXX-XXX.ip.secureserver.nethttp://ip-xxx-xxx-xxx-xxx.ip.secureserver.net/ 2.6.18-028stab064.7 #1 SMP Wed Aug 26 13:11:07 MSD 2009 i686 i686 i386 GNU/Linux When I try to compile DAHDI it fails with: make[2]: Leaving directory `/usr/src/asterisk/dahdi-linux-complete-2.3.0.1+2.3.0/linux/drivers/dahdi/firmware' You do not appear to have the sources for the 2.6.18-028stab064.7 kernel installed. Is there a way to trick DAHDI to use the installed kernel? Thanks for the help! -- -Thermal What kernel versions do you have installed? If you are currently running an older kernel but installed a newer kernel and sources but havent rebooted to activate the new one yet then it may still be trying to locate the source for the older running kernel. -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Can't compile DAHDI - wrong kernel source
On Wed, Jul 14, 2010 at 4:55 AM, bruce bruce bruceb...@gmail.com wrote: I am stuck with the same problem but I have used asterisk yum repository and it worked by itself without me worrying for kernel stuff. However, I need to install speex codec and now I am stuck as it doesn't get picked up by the yum asterisk install somehow. I have lib speex and speex already installed and when doing yum install asterisk16 I don't see speex in core show translation Is there anything specific I have to do? Do I have to build from source as well? -Sorry, didn't mean to hijack the thread. Thanks, Bruce On Wed, Jul 14, 2010 at 5:08 AM, Chandrakant Solanki solanki.chandrak...@gmail.com wrote: Hi If you install rpm from any location it goes to its default location. You just go for above steps. For kernel you can go for http://kernel.org -- Regards, Chandrakant Solanki On Wed, Jul 14, 2010 at 2:06 PM, liuxin nyliuxin...@gmail.com wrote: Hi. The best easy way is: copy kernel-devel-2.6.18-028stab064.7.rpm to /usr/src then run rpm -ivh kernel-devel-2.6.18-028stab064.7.rpm 2010/7/14 Gareth Blades list-aster...@skycomuk.com Thermal Wetland wrote: I have a virtual server with godaddy but can not compile DAHDI as it complains that I do not have the correct kernel source. The package installed is - kernel-devel-2.6.18-164.11.1.el5.i686: Package kernel-devel-2.6.18-164.11.1.el5.i686 already installed and latest version Nothing to do uname -a returns: Linux ip-XXX-XXX-XXX-XXX.ip.secureserver.net http://ip-XXX-XXX-XXX-XXX.ip.secureserver.net 2.6.18-028stab064.7 #1 SMP Wed Aug 26 13:11:07 MSD 2009 i686 i686 i386 GNU/Linux When I try to compile DAHDI it fails with: make[2]: Leaving directory `/usr/src/asterisk/dahdi-linux-complete-2.3.0.1+2.3.0/linux/drivers/dahdi/firmware' You do not appear to have the sources for the 2.6.18-028stab064.7 kernel installed. Is there a way to trick DAHDI to use the installed kernel? Thanks for the help! -- -Thermal What kernel versions do you have installed? If you are currently running an older kernel but installed a newer kernel and sources but havent rebooted to activate the new one yet then it may still be trying to locate the source for the older running kernel. I was able to download the rpm's and install them: [r...@ip-97-74-119-59 src]# rpm -ivh ovzkernel-2.6.18-128.2.1.el5.028stab064.7.i686.rpm warning: ovzkernel-2.6.18-128.2.1.el5.028stab064.7.i686.rpm: Header V3 DSA signature: NOKEY, key ID a7a1d4b6 Preparing... ### [100%] package ovzkernel-2.6.18-128.2.1.el5.028stab064.7.i686 is already installed [r...@ip-97-74-119-59 src]# rpm -ivh ovzkernel-devel-2.6.18-128.2.1.el5.028stab064.7.i686.rpm warning: ovzkernel-devel-2.6.18-128.2.1.el5.028stab064.7.i686.rpm: Header V3 DSA signature: NOKEY, key ID a7a1d4b6 Preparing... ### [100%] package ovzkernel-devel-2.6.18-128.2.1.el5.028stab064.7.i686 is already installed [r...@ip-97-74-119-59 src]# cd - /usr/src/asterisk/dahdi-linux-complete-2.3.0.1+2.3.0 [r...@ip-97-74-119-59 dahdi-linux-complete-2.3.0.1+2.3.0]# make all make -C linux all make[1]: Entering directory `/usr/src/asterisk/dahdi-linux-complete-2.3.0.1+2.3.0/linux' make -C drivers/dahdi/firmware firmware-loaders make[2]: Entering directory `/usr/src/asterisk/dahdi-linux-complete-2.3.0.1+2.3.0/linux/drivers/dahdi/firmware' make[2]: Leaving directory `/usr/src/asterisk/dahdi-linux-complete-2.3.0.1+2.3.0/linux/drivers/dahdi/firmware' You do not appear to have the sources for the 2.6.18-028stab064.7 kernel installed. make[1]: *** [modules] Error 1 make[1]: Leaving directory `/usr/src/asterisk/dahdi-linux-complete-2.3.0.1+2.3.0/linux' make: *** [all] Error 2 The directories in /usr/src/kernels is: [r...@ip-97-74-119-59 kernels]# ls -l total 51328 drwxr-xr-x 20 root root 4096 Jul 14 18:04 2.6.18-128.2.1.el5.028stab064.7-i686 drwxr-xr-x 19 root root 4096 Jul 13 20:25 2.6.18-164.11.1.el5-i686 drwxrwxr-x 19 root root 4096 Feb 23 2007 linux-2.6.18.8 I tried to install the kernel from source but couldn't find the exact kernel, I installed linux-2.6.18.8 as I was the closest. Both of the directories in /usr/src/kernels/ have the -i686 suffix, is that the issue? -- -Thermal -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Can't compile DAHDI - wrong kernel source
I have a virtual server with godaddy but can not compile DAHDI as it complains that I do not have the correct kernel source. The package installed is - kernel-devel-2.6.18-164.11.1.el5.i686: Package kernel-devel-2.6.18-164.11.1.el5.i686 already installed and latest version Nothing to do uname -a returns: Linux ip-XXX-XXX-XXX-XXX.ip.secureserver.net 2.6.18-028stab064.7 #1 SMP Wed Aug 26 13:11:07 MSD 2009 i686 i686 i386 GNU/Linux When I try to compile DAHDI it fails with: make[2]: Leaving directory `/usr/src/asterisk/dahdi-linux-complete-2.3.0.1+2.3.0/linux/drivers/dahdi/firmware' You do not appear to have the sources for the 2.6.18-028stab064.7 kernel installed. Is there a way to trick DAHDI to use the installed kernel? Thanks for the help! -- -Thermal -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
