[asterisk-users] Can dial long distance but not local?
AsteriskNOW 1.4.26.2 with a Digium TE205P connected to an ISDN PRI (single span). I'm sure I just have something goofed up in the dialplans? I have a bunch of Polycom 331 IP phones connecting to the server. I can dial the other extensions in the system fine and I can dial long distance outgoing but cannot seem to get it to dial local (7 digit) calls. I see this in the CLI: -- Executing [...@macro-dialout-trunk:19] Dial(SIP/801-09b6e498, DAHDI/g1/5551212|300|) in new stack -- Requested transfer capability: 0x00 - SPEECH -- Called g1/5551212 -- Channel 0/1, span 1 got hangup, cause 28 -- Hungup 'DAHDI/1-1' == Everyone is busy/congested at this time (1:0/0/1) -- Executing [...@macro-dialout-trunk:20] Goto(SIP/801-09b6e498, s-CHANUNAVAIL|1) in new stack -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1) -- Executing [s-chanunav...@macro-dialout-trunk:1] GotoIf(SIP/801-09b6e498, 1?noreport) in new stack -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,3) -- Executing [s-chanunav...@macro-dialout-trunk:3] NoOp(SIP/801-09b6e498, TRUNK Dial failed due to CHANUNAVAIL (hangupcause: 2 - failing through to other trunks) in new stack Also when I check the PRI DEBUG I see an Error 28 which indicates an invalid number format. But I'm just sending 5551212, which should be o.k. I'm a newbie at this...any suggestions welcomed. -Ben- image001.gif___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2009 - October 13 - 15 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Can dial long distance but not local?
Ben Schorr wrote: AsteriskNOW 1.4.26.2 with a Digium TE205P connected to an ISDN PRI (single span). I’m sure I just have something goofed up in the dialplans? I have a bunch of Polycom 331 IP phones connecting to the server. I can dial the other extensions in the system fine and I can dial long distance outgoing but cannot seem to get it to dial local (7 digit) calls. My guess is that your provider requires the full 10 digits even for local calls. Doug -- Ben Franklin quote: Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety. ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2009 - October 13 - 15 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Can dial long distance but not local?
Perhaps send it as 10 digits or 1+? Cary Fitch _ From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Ben Schorr Sent: Wednesday, October 07, 2009 3:58 PM To: asterisk-users@lists.digium.com Subject: [asterisk-users] Can dial long distance but not local? AsteriskNOW 1.4.26.2 with a Digium TE205P connected to an ISDN PRI (single span). I'm sure I just have something goofed up in the dialplans? I have a bunch of Polycom 331 IP phones connecting to the server. I can dial the other extensions in the system fine and I can dial long distance outgoing but cannot seem to get it to dial local (7 digit) calls. I see this in the CLI: -- Executing [...@macro-dialout-trunk:19] Dial(SIP/801-09b6e498, DAHDI/g1/5551212|300|) in new stack -- Requested transfer capability: 0x00 - SPEECH -- Called g1/5551212 -- Channel 0/1, span 1 got hangup, cause 28 -- Hungup 'DAHDI/1-1' == Everyone is busy/congested at this time (1:0/0/1) -- Executing [...@macro-dialout-trunk:20] Goto(SIP/801-09b6e498, s-CHANUNAVAIL|1) in new stack -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1) -- Executing [s-chanunav...@macro-dialout-trunk:1] GotoIf(SIP/801-09b6e498, 1?noreport) in new stack -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,3) -- Executing [s-chanunav...@macro-dialout-trunk:3] NoOp(SIP/801-09b6e498, TRUNK Dial failed due to CHANUNAVAIL (hangupcause: 2Cool - failing through to other trunks) in new stack Also when I check the PRI DEBUG I see an Error 28 which indicates an invalid number format. But I'm just sending 5551212, which should be o.k. I'm a newbie at this.any suggestions welcomed. -Ben- image001.gif___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2009 - October 13 - 15 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Can dial long distance but not local?
Thanks Cary, If I send as 10 digits (dialing the local area code) I get an error from the phone co that I've dialed an incorrect number. Unfortunately I live in Hawaii where the 808 area code covers the whole state but is treated differently on neighbor-islands. So if I dial 8085551212 I get information for the neighbor islands rather than for our local island. I think I tried the 1+ trick with the same results, but I'll give it another try just in case I overlooked it. Ben M. Schorr Chief Executive Officer __ Roland Schorr Tower www.rolandschorr.com http://www.rolandschorr.com/ b...@rolandschorr.com mailto:b...@rolandschorr.com Twitter: http://www.twitter.com/bschorr From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Cary Fitch Sent: Wednesday, October 07, 2009 11:04 AM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: Re: [asterisk-users] Can dial long distance but not local? Perhaps send it as 10 digits or 1+? Cary Fitch From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Ben Schorr Sent: Wednesday, October 07, 2009 3:58 PM To: asterisk-users@lists.digium.com Subject: [asterisk-users] Can dial long distance but not local? AsteriskNOW 1.4.26.2 with a Digium TE205P connected to an ISDN PRI (single span). I'm sure I just have something goofed up in the dialplans? I have a bunch of Polycom 331 IP phones connecting to the server. I can dial the other extensions in the system fine and I can dial long distance outgoing but cannot seem to get it to dial local (7 digit) calls. I see this in the CLI: -- Executing [...@macro-dialout-trunk:19] Dial(SIP/801-09b6e498, DAHDI/g1/5551212|300|) in new stack -- Requested transfer capability: 0x00 - SPEECH -- Called g1/5551212 -- Channel 0/1, span 1 got hangup, cause 28 -- Hungup 'DAHDI/1-1' == Everyone is busy/congested at this time (1:0/0/1) -- Executing [...@macro-dialout-trunk:20] Goto(SIP/801-09b6e498, s-CHANUNAVAIL|1) in new stack -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1) -- Executing [s-chanunav...@macro-dialout-trunk:1] GotoIf(SIP/801-09b6e498, 1?noreport) in new stack -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,3) -- Executing [s-chanunav...@macro-dialout-trunk:3] NoOp(SIP/801-09b6e498, TRUNK Dial failed due to CHANUNAVAIL (hangupcause: 2 - failing through to other trunks) in new stack Also when I check the PRI DEBUG I see an Error 28 which indicates an invalid number format. But I'm just sending 5551212, which should be o.k. I'm a newbie at this...any suggestions welcomed. -Ben- image001.gif___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2009 - October 13 - 15 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Can dial long distance but not local?
No, unfortunately not, our local area code is split among multiple islands. You have to dial it to reach a neighbor island. If you dial it with a local number it tries to find that number on a neighbor island (then usually fails). I'm trying to find out from them if they want us to dial something else first though - like a 1 or a 9. I tried pridialplan=local as well as pridialplan=unknown. No improvement either way. Ben M. Schorr Chief Executive Officer __ Roland Schorr Tower www.rolandschorr.com b...@rolandschorr.com Twitter: http://www.twitter.com/bschorr -Original Message- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Doug Lytle Sent: Wednesday, October 07, 2009 11:05 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Can dial long distance but not local? Ben Schorr wrote: AsteriskNOW 1.4.26.2 with a Digium TE205P connected to an ISDN PRI (single span). I'm sure I just have something goofed up in the dialplans? I have a bunch of Polycom 331 IP phones connecting to the server. I can dial the other extensions in the system fine and I can dial long distance outgoing but cannot seem to get it to dial local (7 digit) calls. My guess is that your provider requires the full 10 digits even for local calls. Doug -- Ben Franklin quote: Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety. ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2009 - October 13 - 15 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2009 - October 13 - 15 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
