Re: [asterisk-users] Cisco 7940 Problem (Mess)
On Tue, Sep 19, 2006 at 12:12:03AM +0900, Gary Guthary wrote: This is going to be an exercise in 'Networking' for sure... The only catch is that per the phone's network settings: The phone uses a static IP of something like 192.168.0.220 with a Gateway of 192.168.0.1. - Standard class 'C' netmask (255.255.255.0). The phone has DHCP DISABLED. The phone has it's TFTP server set to something like 62.120.xxx.xxx (something completely outside of the local network). My home LAN uses 10.0.0.xxx on the local side. But I can reset my XP-Box to 192.168.0.99 and ping the phone with no probs. But If I set my XP-Box to a static IP of the Phone's TFTP server, my 'SolarWinds' TFTP server sees nothing. - Figured as much as the phone's IP and my TFTP server's IP are not in the same 'net. Bottom line. - I've got to figure out a way to build a 'mini-network' so the phone'll be happy but also set up a PC TFTP with the same address that's set in the phone. - Perhaps I can fake-out the phone into thinking it's hitting a TFTP box on the Internet (). Set your TFTP server's IP address to be the phone's gateway address (i.e. 192.168.0.1), and add a loopback address on your TFTP server of 62.120.xxx.xxx. Then outbound packets will hit your machine, which will believe that the address being contacted is itself, and it will answer. I don't know how to do that with XP. Perhaps put in another NIC and configure it as 62.120.xxx.xxx (and plug it into a hub so that it thinks the cable is active) Under Linux or FreeBSD you can use something like ifconfig lo:0 62.120.xxx.xxx/32 ifconfig lo alias 62.120.xxx.xxx/32 respectively. Maybe you can boot from an Ubuntu CD (this gives you a live Linux desktop without reinstalling your system) and set up a tftp server there. Debug using tcpdump (Linux/FreeBSD) or ethereal (Windows) HTH, Brian. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Cisco 7940 Problem (Mess)
I know this isn't directly Asterisk related. - But I do appreciate the responses I get from you folks. - At least I don't get flamed like I've seen on the Java Perl-Mod lists (geesh!). Okay - Here's what I've got. A Cisco (used) 7940 that's loaded with MGCP and I want to load SIP so it'll work on my Asterisk box (outside of the FXO FXS modules on the TDM card in the Asterisk server, I only run SIP on the hardphones). I don't know the phone's password (sound familiar?). - Have tried everything, cisco, *##, etc Nothing works. So I figured I would set up a .cnf or .tlv (or whatever file MGCP looks for) with a one-line entry something like 'phone_password:cisco' then let the phone TFTP the file and reset it's password. - Then I can get into the 'innards' and set up my local stuff so I can upgrade/reload the phone with SIP and get it ready for my Asterisk box. - Sound do-able? This is going to be an exercise in 'Networking' for sure... The only catch is that per the phone's network settings: The phone uses a static IP of something like 192.168.0.220 with a Gateway of 192.168.0.1. - Standard class 'C' netmask (255.255.255.0). The phone has DHCP DISABLED. The phone has it's TFTP server set to something like 62.120.xxx.xxx (something completely outside of the local network). My home LAN uses 10.0.0.xxx on the local side. But I can reset my XP-Box to 192.168.0.99 and ping the phone with no probs. But If I set my XP-Box to a static IP of the Phone's TFTP server, my 'SolarWinds' TFTP server sees nothing. - Figured as much as the phone's IP and my TFTP server's IP are not in the same 'net. Bottom line. - I've got to figure out a way to build a 'mini-network' so the phone'll be happy but also set up a PC TFTP with the same address that's set in the phone. - Perhaps I can fake-out the phone into thinking it's hitting a TFTP box on the Internet (). I've got plenty of PC's even a spare Linksys router. Any ideas. - Or is there something simpler. - Or have I just bought an expensive paper-weight? Thanks in advance. Gary Guthary [EMAIL PROTECTED] ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Cisco 7940 Problem (Mess)
You'll need to change your XP box to the default router of the phone (or, just change your XP to a static on your local net, then add a static ipunder advanced for the default route of the phone, that way you still have access to the internet from your XP box), and then add (under advanced) the IP address of the tftp server the phone is looking for. Since your XP box now knows about the local network of the phone, and the IP of the tftp server, it won't tell the phone to go elsewhere. That will at least get you to the point where the phone will try to access your tftp server. As far as the rest, you'll probably need to start out on Cisco's version 3 of SIP and keep upgrading it version by version (at least major version) until you get to the version you want to run. To get more info on this, you cansearch Cisco's website on upgrading from MGCP to SIP. I've done this a few times, but it seems like I had to try different things each time to get things working. There was nothing consistent enough for me to write down the steps I took. I had one phone take me most of the day, another I had pretty much given up on, and then suddenly it worked. Be persistent. Eventually you will get there. You will need a smartnet contract to do this, unless you already have access to all the firmware versions of the phone. On 9/18/06, Gary Guthary [EMAIL PROTECTED] wrote: I know this isn't directly Asterisk related. - But I do appreciate theresponses I get from you folks. - At least I don't get flamed like I've seen on the Java Perl-Mod lists (geesh!).Okay - Here's what I've got.A Cisco (used) 7940 that's loaded with MGCP and I want to load SIP so it'llwork on my Asterisk box (outside of the FXO FXS modules on the TDM card in the Asterisk server, I only run SIP on the hardphones).I don't know the phone's password (sound familiar?). - Have triedeverything, cisco, *##, etcNothing works.So I figured I would set up a .cnf or .tlv (or whatever file MGCP looks for) with a one-line entry something like 'phone_password:cisco' then let thephone TFTP the file and reset it's password. - Then I can get into the'innards' and set up my local stuff so I can upgrade/reload the phone with SIP and get it ready for my Asterisk box. - Sound do-able?This is going to be an exercise in 'Networking' for sure...The only catch is that per the phone's network settings:The phone uses a static IP of something like 192.168.0.220 with a Gateway of192.168.0.1. - Standard class 'C' netmask (255.255.255.0).The phone has DHCP DISABLED. The phone has it's TFTP server set to something like 62.120.xxx.xxx(something completely outside of the local network).My home LAN uses 10.0.0.xxx on the local side.But I can reset my XP-Box to 192.168.0.99 and ping the phone with no probs.But If I set my XP-Box to a static IP of the Phone's TFTP server, my'SolarWinds' TFTP server sees nothing. - Figured as much as the phone's IP and my TFTP server's IP are not in the same 'net.Bottom line. - I've got to figure out a way to build a 'mini-network' so thephone'll be happy but also set up a PC TFTP with the same address that's set in the phone. - Perhaps I can fake-out the phone into thinking it'shitting a TFTP box on the Internet ().I've got plenty of PC's even a spare Linksys router.Any ideas. - Or is there something simpler. - Or have I just bought an expensive paper-weight?Thanks in advance.Gary Guthary[EMAIL PROTECTED]___--Bandwidth and Colocation provided by Easynews.com --asterisk-users mailing listTo UNSUBSCRIBE or update options visit:http://lists.digium.com/mailman/listinfo/asterisk-users -- Lacy MooreAspendora, Inc. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Cisco 7940 Problem (Mess)
A Cisco (used) 7940 that's loaded with MGCP and I want to load SIP so it'll work on my Asterisk box (outside of the FXO FXS modules on the TDM card in the Asterisk server, I only run SIP on the hardphones). I don't know the phone's password (sound familiar?). - Have tried everything, cisco, *##, etc Nothing works. You could factory-reset the phone. try this http://www.cisco.com/en/US/products/hw/phones/ps379/products_tech_note09186a00800941bb.shtml and this http://www.sokol-associates.com/?q=node/51 hth ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
