Re: [asterisk-users] Cisco CCM - Asterisk
Hi! You were right! changing the Calling Search Space for the SIP trunk worked!. Many thanks for your help Eric. Now I'm fine tuning the application, but the communication with Cisco works pretty fione so far.Alyed Return-Path: [EMAIL PROTECTED] Wed Oct 11 10:57:00 2006Received: from rwcrmhc15.comcast.net [204.127.192.85] by maila11.webcontrolcenter.com with SMTP; Wed, 11 Oct 2006 10:57:00 -0700 I think SIP is working on your CM becuase it sends a 404 message, I think your problem is the CM cant find the endpoint in its database.I am running CM 4.1(3)sr1, and under where you enter the device name there is a section called, "Call Routing Information". There you should see a field called "Calling Search Space".You should select the Calling Search space that the destination endpoints are in. Or if you want to create a new calling search space, and then give them access to each other you can do that.In the attachment, I circled the calling search space field I see on my Add NEW SIP TRUNK PAGE.Hope this helps. -- Original message --From: "Alyed Tzompa" Many thanks for your interest :) In the Cisco the only thing I've donde so far is enable a SIP trunk and pointing it towards the IP the Asterisk has. For this I mean: Device -- Trunk -- Add a new Trunk Seleccted for Trunk Type "SIP trunk" Selected for Device Protocol "SIP" Entered for Device Name "asterisk" Entered for Description "asterisk" Selected the appropriate device for Device Pool Entered for Destination Address "192.168.1.20" (Asterisk's IP) Selected for Outgoing Transport Type "UDP" Entered the appropriate routing patterns clicked on "Insert" in sip.conf I'm using the same config shown in th VoIP-info wiki: [cisco] type=friend context=cisco-test host=192.168.1.100 disallow=all allow=ulaw allow=alaw nat=no canreinvite=yes qualify=yes Regards, Alyed Return-Path: Tue Oct 10 16:24:58 2006 Received: from rwcrmhc13.comcast.net [216.148.227.153] by maila11.webcontrolcenter.com with SMTP;Tue, 10 Oct 2006 16:24:58 -0700 I can check for you tomorrow and send you screen shots. How do you have the asterisk configured on the CM. Please send me some configuration information. -Eric -- Original message -- From: "Alyed Tzompa" Do you know where in the Cisco menu can I check out this "calling search spaces" you point out? I don't have access to it right now so want to know if this is a configurable menu in the web interface or will need to ask for expert (and expensive) Cisco assistance.Alyed Return-Path: Tue Oct 10 11:04:09 2006 Received: from rwcrmhc11.comcast.net [216.148.227.151] by maila11.webcontrolcenter.com with SMTP; Tue, 10 Oct 2006 11:04:09 -0700Looks like the CallManager is unable to find the endpoint in its database. Make sure asterisk trunk on the Call manager is in the same "calling Search Space" as the phones are in, or make sure there is access between the "calling search spaces"-Eric -- Original message -- From: "Alyed Tzompa" Hi! I'm trying to communicate a Cisco CCM 4.0 with Asterisk 1.2.11, I 've followedthe info in http://www.voip-info.org/tiki-index.php?page=Asterisk+Cisco+CallManager+Integrat ion but still not able to make Asterisk communicate with Cisco. I keep on receiving--- SIP/2.0 400 Bad Request - 'Malformed/Missing URL' --- and --- SIP/2.0 404 Not Found --- messages everytime I send a call. Had play a lot with the waySIP messages are sent to the Cisco, but always been unseccessful. I'm begining to think this is more of a Cisco config problem than Asterisk, has anyone had a similar problem??? I'm not a Cisco expert so dun't know if I need to "enable" SIP messageing/reception in the Cisco. Regards, Alyed ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Cisco CCM - Asterisk
Hi! I'm trying to communicate a Cisco CCM 4.0 with Asterisk 1.2.11, I 've followed the info in http://www.voip-info.org/tiki-index.php?page=Asterisk+Cisco+CallManager+Integration but still not able to make Asterisk communicate with Cisco. I keep on receiving --- SIP/2.0 400 Bad Request - 'Malformed/Missing URL' --- and --- SIP/2.0 404 Not Found --- messages everytime I send a call. Had play a lot with the way SIP messages are sent to the Cisco, but always been unseccessful. I'm begining to think this is more of a Cisco config problem than Asterisk, has anyone had a similar problem??? I'm not a Cisco expert so dun't know if I need to "enable" SIP messageing/reception in the Cisco. Regards, Alyed ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Cisco CCM - Asterisk
Looks like the CallManager is unable to find the endpoint in its database. Make sure asterisk trunk on the Call manager is in the same calling Search Space as the phones are in, or make sure there is access between the calling search spaces -Eric -- Original message -- From: Alyed Tzompa [EMAIL PROTECTED] Hi! I'm trying to communicate a Cisco CCM 4.0 with Asterisk 1.2.11, I 've followed the info in http://www.voip-info.org/tiki-index.php?page=Asterisk+Cisco+CallManager+Integrat ion but still not able to make Asterisk communicate with Cisco. I keep on receiving --- SIP/2.0 400 Bad Request - 'Malformed/Missing URL' --- and --- SIP/2.0 404 Not Found --- messages everytime I send a call. Had play a lot with the way SIP messages are sent to the Cisco, but always been unseccessful. I'm begining to think this is more of a Cisco config problem than Asterisk, has anyone had a similar problem??? I'm not a Cisco expert so dun't know if I need to enable SIP messageing/reception in the Cisco. Regards, Alyed ---BeginMessage--- Hi! I'm trying to communicate a Cisco CCM 4.0 with Asterisk 1.2.11, I 've followed the info in http://www.voip-info.org/tiki-index.php?page=Asterisk+Cisco+CallManager+Integration but still not able to make Asterisk communicate with Cisco. I keep on receiving --- SIP/2.0 400 Bad Request - 'Malformed/Missing URL' --- and --- SIP/2.0 404 Not Found --- messages everytime I send a call. Had play a lot with the way SIP messages are sent to the Cisco, but always been unseccessful. I'm begining to think this is more of a Cisco config problem than Asterisk, has anyone had a similar problem??? I'm not a Cisco expert so dun't know if I need to "enable" SIP messageing/reception in the Cisco. Regards, Alyed ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ---End Message--- ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Cisco CCM - Asterisk
I'm begining to think this is more of a Cisco config problem than Asterisk, has anyone had a similar problem??? I'm not a Cisco expert so dun't know if I need to enable SIP messageing/reception in the Cisco. Yeah, pretty sure to enable it you're going to have to upgrade to CCM 5. I could be wrong, that has been known to happen, once. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Cisco CCM - Asterisk
On Tue, Oct 10, 2006 at 01:21:28PM -0500, Lacy Moore - Aspendora wrote: I'm begining to think this is more of a Cisco config problem than Asterisk, has anyone had a similar problem??? I'm not a Cisco expert so dun't know if I need to enable SIP messageing/reception in the Cisco. Yeah, pretty sure to enable it you're going to have to upgrade to CCM 5. I could be wrong, that has been known to happen, once. SIP trunks are supported in CM4.2 and CME 3.4 and 4.0 See the data sheet for CM4.2 here: http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_data_sheet0900aecd8042402c.html You're probably thinking of SIP endpoint functionality, which was added in CM5. -- Phil ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Cisco CCM - Asterisk
Do you know where in the Cisco menu can I check out this "calling search spaces" you point out? I don't have access to it right now so want to know if this is a configurable menu in the web interface or will need to ask for expert (and expensive) Cisco assistance.Alyed Return-Path: [EMAIL PROTECTED] Tue Oct 10 11:04:09 2006Received: from rwcrmhc11.comcast.net [216.148.227.151] by maila11.webcontrolcenter.com with SMTP; Tue, 10 Oct 2006 11:04:09 -0700 Looks like the CallManager is unable to find the endpoint in its database. Make sure asterisk trunk on the Call manager is in the same "calling Search Space" as the phones are in, or make sure there is access between the "calling search spaces"-Eric -- Original message --From: "Alyed Tzompa" Hi! I'm trying to communicate a Cisco CCM 4.0 with Asterisk 1.2.11, I 've followed the info in http://www.voip-info.org/tiki-index.php?page=Asterisk+Cisco+CallManager+Integrat ion but still not able to make Asterisk communicate with Cisco. I keep on receiving --- SIP/2.0 400 Bad Request - 'Malformed/Missing URL' --- and --- SIP/2.0 404 Not Found --- messages everytime I send a call. Had play a lot with the way SIP messages are sent to the Cisco, but always been unseccessful. I'm begining to think this is more of a Cisco config problem than Asterisk, has anyone had a similar problem??? I'm not a Cisco expert so dun't know if I need to "enable" SIP messageing/reception in the Cisco. Regards, Alyed ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Cisco CCM - Asterisk
What I want is to transfer some calls to a Cisco extension, so think I don't need to do the upgrade to CM5.I'm I right?AlyedOn Tue, Oct 10, 2006 at 01:21:28PM -0500, Lacy Moore - Aspendora wrote: I'm begining to think this is more of a Cisco config problem than Asterisk, has anyone had a similar problem??? I'm not a Cisco expert so dun't know if I need to "enable" SIP messageing/reception in the Cisco. Yeah, pretty sure to enable it you're going to have to upgrade to CCM 5. I could be wrong, that has been known to happen, once.SIP trunks are supported in CM4.2 and CME 3.4 and 4.0See the data sheet for CM4.2 here:http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_data_sheet0900aecd8042402c.htmlYou're probably thinking of SIP endpoint functionality, which was addedin CM5.--Phil ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Cisco CCM - Asterisk
You're probably thinking of SIP endpoint functionality, which was addedin CM5. I was. The more I thought about it, the more I was wondering. Just too dang lazy to look it up. I read just about everything I could get my hands on from Cisco regarding VoIP, but everything got all mixed together. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Cisco CCM - Asterisk
On Tue, 2006-10-10 at 15:16 -0700, Alyed Tzompa wrote: What I want is to transfer some calls to a Cisco extension, so think I don't need to do the upgrade to CM5. I'm I right? Alyed Yes - you are right. On your CCM, go to a phone and check the CSS of the device and the partition of the line itself. Make sure the trunk has access to that CSS and your route pattern have access to the CSS/Partitions. CCS/Partitions can be found under: RoutePlan-Class and Control RoutePlan-Route Hunt -Greg ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users