Re: [asterisk-users] Detected alarm on channel 3: Red Alarm
Oh, thanks very much Shaun, I'm from Brazil And about the voltage, how can I fix this red alarm? Em 05/01/2016 13:23, "Shaun Ruffell" escreveu: > On Tue, Jan 05, 2016 at 02:36:42PM +, Ryan, Travis wrote: > > > -Original Message- > > > From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users- > > > boun...@lists.digium.com] On Behalf Of Vitor Mazuco > > > Sent: Tuesday, January 05, 2016 9:21 AM > > > To: Asterisk Users Mailing List - Non-Commercial Discussion > > > Subject: [asterisk-users] Detected alarm on channel 3: Red Alarm > > > > > > Hi everyone! > > > > > > I have a Digium Card TDM410 > > > > > > But, it appear for me this massege > > > > > > chan_dahdi.c:8061 handle_alarms: Detected alarm on channel 3: Red Alarm > > > > > > But my line is ok! > > > > > > But sometimes it back > > > > > > sig_analog.c:3807 analog_handle_init_event: Alarm cleared on channel 2 > > > > > > But it again back to red alarm. > > > > > > What can be happen? > > > > > > My lines is all ok! But when I put on Digium Card TDM410 is very > > > inconsistent > > > > > > Thanks > > > > > > > Honestly, I've only had red alarms on any of my cards if there was > > a problem with the lines or service over those lines. Maybe > > someone else could speak to other reasons the red light might > > appear. > > The red alarm on the analog cards, like the TDM410, appear when the > card does not detect a sufficient battery voltage from the central > office. > > Typically this will happen when the cable is disconnected from the > card, there is something flaky in the connection with the central > office, a filter is causing a voltage drop, etc.. > > One thing to check is that the 'opermode' module parameter is set > for the country that you're in, if you're not in the United States > or Canada. > > -- > Shaun Ruffell > Digium, Inc. | Linux Kernel Developer > 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA > Check us out at: www.digium.com & www.asterisk.org > > -- > _ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: >http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Detected alarm on channel 3: Red Alarm
On Tue, Jan 05, 2016 at 02:36:42PM +, Ryan, Travis wrote: > > -Original Message- > > From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users- > > boun...@lists.digium.com] On Behalf Of Vitor Mazuco > > Sent: Tuesday, January 05, 2016 9:21 AM > > To: Asterisk Users Mailing List - Non-Commercial Discussion > > Subject: [asterisk-users] Detected alarm on channel 3: Red Alarm > > > > Hi everyone! > > > > I have a Digium Card TDM410 > > > > But, it appear for me this massege > > > > chan_dahdi.c:8061 handle_alarms: Detected alarm on channel 3: Red Alarm > > > > But my line is ok! > > > > But sometimes it back > > > > sig_analog.c:3807 analog_handle_init_event: Alarm cleared on channel 2 > > > > But it again back to red alarm. > > > > What can be happen? > > > > My lines is all ok! But when I put on Digium Card TDM410 is very > > inconsistent > > > > Thanks > > > > Honestly, I've only had red alarms on any of my cards if there was > a problem with the lines or service over those lines. Maybe > someone else could speak to other reasons the red light might > appear. The red alarm on the analog cards, like the TDM410, appear when the card does not detect a sufficient battery voltage from the central office. Typically this will happen when the cable is disconnected from the card, there is something flaky in the connection with the central office, a filter is causing a voltage drop, etc.. One thing to check is that the 'opermode' module parameter is set for the country that you're in, if you're not in the United States or Canada. -- Shaun Ruffell Digium, Inc. | Linux Kernel Developer 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at: www.digium.com & www.asterisk.org -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Detected alarm on channel 3: Red Alarm
My line is comming from a monden ADSL that it provide internet too. 2016-01-05 12:46 GMT-02:00, Ryan, Travis : > > >> -Original Message- >> From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users- >> boun...@lists.digium.com] On Behalf Of Vitor Mazuco >> Sent: Tuesday, January 05, 2016 9:42 AM >> To: Asterisk Users Mailing List - Non-Commercial Discussion >> Subject: Re: [asterisk-users] Detected alarm on channel 3: Red Alarm >> >> Humm, if I put a filter in this lines, maybe back? >> >> >> >> 2016-01-05 12:36 GMT-02:00, Ryan, Travis : >> > >> >> -Original Message- >> >> From: asterisk-users-boun...@lists.digium.com [mailto:asterisk- >> users- >> >> boun...@lists.digium.com] On Behalf Of Vitor Mazuco >> >> Sent: Tuesday, January 05, 2016 9:21 AM >> >> To: Asterisk Users Mailing List - Non-Commercial Discussion >> >> Subject: [asterisk-users] Detected alarm on channel 3: Red Alarm >> >> >> >> Hi everyone! >> >> >> >> I have a Digium Card TDM410 >> >> >> >> But, it appear for me this massege >> >> >> >> chan_dahdi.c:8061 handle_alarms: Detected alarm on channel 3: Red >> >> Alarm >> >> >> >> But my line is ok! >> >> >> >> But sometimes it back >> >> >> >> sig_analog.c:3807 analog_handle_init_event: Alarm cleared on channel >> >> 2 >> >> >> >> But it again back to red alarm. >> >> >> >> What can be happen? >> >> >> >> My lines is all ok! But when I put on Digium Card TDM410 is very >> >> inconsistent >> >> >> >> Thanks >> >> >> >> -- >> > Honestly, I've only had red alarms on any of my cards if there was a >> > problem with the lines or service over those lines. Maybe someone >> else >> > could speak to other reasons the red light might appear. >> > >> > >> > -- > > [Ryan, Travis] Is your line pretty long? Maybe the distance is far so the > signal is weak? > > > -- > _ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: >http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Detected alarm on channel 3: Red Alarm
> -Original Message- > From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users- > boun...@lists.digium.com] On Behalf Of Vitor Mazuco > Sent: Tuesday, January 05, 2016 9:42 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] Detected alarm on channel 3: Red Alarm > > Humm, if I put a filter in this lines, maybe back? > > > > 2016-01-05 12:36 GMT-02:00, Ryan, Travis : > > > >> -Original Message- > >> From: asterisk-users-boun...@lists.digium.com [mailto:asterisk- > users- > >> boun...@lists.digium.com] On Behalf Of Vitor Mazuco > >> Sent: Tuesday, January 05, 2016 9:21 AM > >> To: Asterisk Users Mailing List - Non-Commercial Discussion > >> Subject: [asterisk-users] Detected alarm on channel 3: Red Alarm > >> > >> Hi everyone! > >> > >> I have a Digium Card TDM410 > >> > >> But, it appear for me this massege > >> > >> chan_dahdi.c:8061 handle_alarms: Detected alarm on channel 3: Red > >> Alarm > >> > >> But my line is ok! > >> > >> But sometimes it back > >> > >> sig_analog.c:3807 analog_handle_init_event: Alarm cleared on channel > >> 2 > >> > >> But it again back to red alarm. > >> > >> What can be happen? > >> > >> My lines is all ok! But when I put on Digium Card TDM410 is very > >> inconsistent > >> > >> Thanks > >> > >> -- > > Honestly, I've only had red alarms on any of my cards if there was a > > problem with the lines or service over those lines. Maybe someone > else > > could speak to other reasons the red light might appear. > > > > > > -- [Ryan, Travis] Is your line pretty long? Maybe the distance is far so the signal is weak? -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Detected alarm on channel 3: Red Alarm
Humm, if I put a filter in this lines, maybe back? 2016-01-05 12:36 GMT-02:00, Ryan, Travis : > >> -Original Message- >> From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users- >> boun...@lists.digium.com] On Behalf Of Vitor Mazuco >> Sent: Tuesday, January 05, 2016 9:21 AM >> To: Asterisk Users Mailing List - Non-Commercial Discussion >> Subject: [asterisk-users] Detected alarm on channel 3: Red Alarm >> >> Hi everyone! >> >> I have a Digium Card TDM410 >> >> But, it appear for me this massege >> >> chan_dahdi.c:8061 handle_alarms: Detected alarm on channel 3: Red Alarm >> >> But my line is ok! >> >> But sometimes it back >> >> sig_analog.c:3807 analog_handle_init_event: Alarm cleared on channel 2 >> >> But it again back to red alarm. >> >> What can be happen? >> >> My lines is all ok! But when I put on Digium Card TDM410 is very >> inconsistent >> >> Thanks >> >> -- > Honestly, I've only had red alarms on any of my cards if there was a problem > with the lines or service over those lines. Maybe someone else could speak > to other reasons the red light might appear. > > > -- > _ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: >http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Detected alarm on channel 3: Red Alarm
> -Original Message- > From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users- > boun...@lists.digium.com] On Behalf Of Vitor Mazuco > Sent: Tuesday, January 05, 2016 9:21 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: [asterisk-users] Detected alarm on channel 3: Red Alarm > > Hi everyone! > > I have a Digium Card TDM410 > > But, it appear for me this massege > > chan_dahdi.c:8061 handle_alarms: Detected alarm on channel 3: Red Alarm > > But my line is ok! > > But sometimes it back > > sig_analog.c:3807 analog_handle_init_event: Alarm cleared on channel 2 > > But it again back to red alarm. > > What can be happen? > > My lines is all ok! But when I put on Digium Card TDM410 is very > inconsistent > > Thanks > > -- Honestly, I've only had red alarms on any of my cards if there was a problem with the lines or service over those lines. Maybe someone else could speak to other reasons the red light might appear. -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Detected alarm on channel 3: Red Alarm
Hi everyone! I have a Digium Card TDM410 But, it appear for me this massege chan_dahdi.c:8061 handle_alarms: Detected alarm on channel 3: Red Alarm But my line is ok! But sometimes it back sig_analog.c:3807 analog_handle_init_event: Alarm cleared on channel 2 But it again back to red alarm. What can be happen? My lines is all ok! But when I put on Digium Card TDM410 is very inconsistent Thanks -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users