The configuration I did in Cisco Voice GW is listed below;
dial-peer voice 2852 voip
description Incoming Fax Calls to Asterisk
destination-pattern 329..
session protocol sipv2
session target ipv4:192.168.1.69
codec g711ulaw
fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback none
Please ad
On 06/22/2012 12:05 PM, Ahmed Munir wrote:
Here is my setup;
Fax machine -> PSTN -> Cisco Voice GW -> IP cloud -> Asterisk. As on
Cisco Voice GW, T.38 fax already configured on SIP protocol.
Apparently your configuration of the 'Cisco Voice GW' was not
successful, as it refused to accept a r
Here is my setup;
Fax machine -> PSTN -> Cisco Voice GW -> IP cloud -> Asterisk. As on Cisco
Voice GW, T.38 fax already configured on SIP protocol.
> Does your VoIP provider support t.38?
>
> Sent from my iPad
>
> On Jun 22, 2012, at 11:05 AM, Ahmed Munir wrote:
>
> > Hi,
> >
> > I recently con
Does your VoIP provider support t.38?
Sent from my iPad
On Jun 22, 2012, at 11:05 AM, Ahmed Munir wrote:
> Hi,
>
> I recently configured T.38 on Asterisk 10.4.2. When I send the fax to
> Asterisk, it gives the errors as listed below;
>
> WARNING[25986]: app_fax.c:442 transmit_audio: channel
Hi,
I recently configured T.38 on Asterisk 10.4.2. When I send the fax to
Asterisk, it gives the errors as listed below;
WARNING[25986]: app_fax.c:442 transmit_audio: channel
'SIP/192.168.1.69-' refused to negotiate T.38
WARNING[25986]: app_fax.c:174 span_message: WARNING T.30 ECM carri