Re: [asterisk-users] HFC-S card
On 23 February 2010 13:16, Razza razz...@gmail.com wrote: On 23 February 2010 12:58, Tzafrir Cohen tzafrir.co...@xorcom.com wrote: Have you managed to install those zaphfc drivers? Those are basically the same ones from http://code.google.com/p/zaphfc/ Hi Tzafrir. I checkout out that but there were no instructions. Thought I would shamelessly bump my request for simple instructions for patching DAHDi with the ZAPHFC driver on my CentOS 5.4 system. :o) -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] HFC-S card
On 22 February 2010 14:07, Razza razz...@gmail.com wrote: I'm using CentOS5.4, can anyone advise how I can make DAHDi work with a generic HFC-S card? On 22 February 2010 15:12, Pedro Santos pnlsan...@gmail.com wrote: I´m using centos 4.8 server, and i don't now how integrate zaphfc with dadhi Anyone able to help, with some simple advice? -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] HFC-S card
On Tue, Feb 23, 2010 at 12:48:15PM +, Razza wrote: On 22 February 2010 14:07, Razza razz...@gmail.com wrote: I'm using CentOS5.4, can anyone advise how I can make DAHDi work with a generic HFC-S card? On 22 February 2010 15:12, Pedro Santos pnlsan...@gmail.com wrote: I´m using centos 4.8 server, and i don't now how integrate zaphfc with dadhi Anyone able to help, with some simple advice? Have you managed to install those zaphfc drivers? Those are basically the same ones from http://code.google.com/p/zaphfc/ , and the same ones in packages from Elastix and Debian. -- Tzafrir Cohen icq#16849755 jabber:tzafrir.co...@xorcom.com +972-50-7952406 mailto:tzafrir.co...@xorcom.com http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] HFC-S card
On 23 February 2010 12:58, Tzafrir Cohen tzafrir.co...@xorcom.com wrote: Have you managed to install those zaphfc drivers? Those are basically the same ones from http://code.google.com/p/zaphfc/ Hi Tzafrir. I checkout out that but there were no instructions. -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] HFC-S card
Pedro Santos wrote: Does any one put a HFC-S card working in nt ptp mode? I've got an HFC-PCI (single channel) running in NT ptp mode. Dunno if that helps. /Per Jessen, Zürich -- http://www.spamchek.com/ - your spam is our business. -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] HFC-S card
On 22 February 2010 10:26, Per Jessen p...@computer.org wrote: Pedro Santos wrote: Does any one put a HFC-S card working in nt ptp mode? I've got an HFC-PCI (single channel) running in NT ptp mode. Dunno if that helps. /Per Jessen, Zürich Not meaning to hi-jack this thread, I’m not getting a response to my “mISDN (HFC-S) and TDM400P - mISDN: ISAC XDU no TX_BUSY” thread so I thought I would check my understanding here. Am I correct in saying that if you can use a standard HFC-S BRI card with DAHDi 2.2.1, which means you no longer require mISDN? -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] HFC-S card
On 2/22/2010 10:26 AM, Per Jessen wrote: Pedro Santos wrote: Does any one put a HFC-S card working in nt ptp mode? I've got an HFC-PCI (single channel) running in NT ptp mode. Dunno if that helps. /Per Jessen, Zürich I have use this howto http://www.voip-info.org/wiki/view/Asterisk+zaphfc; , but i can´t put the card working in nt ptp mode. Can you explain me how i have to do that? Do you have any howto to make the card work in nt ptp mode? thanks for answer /Pedro Santos -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] HFC-S card
On 2/22/2010 7:36 AM, Tzafrir Cohen wrote: On Sun, Feb 21, 2010 at 07:55:39PM +, Pedro Santos wrote: Does any one put a HFC-S card working in nt ptp mode? Which version of Asterisk do you use? Which channel driver? I have use this howto http://www.voip-info.org/wiki/view/Asterisk+zaphfc; Pedro Santos -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] HFC-S card
On Mon, Feb 22, 2010 at 12:22:39PM +, Pedro Santos wrote: On 2/22/2010 10:26 AM, Per Jessen wrote: Pedro Santos wrote: Does any one put a HFC-S card working in nt ptp mode? I've got an HFC-PCI (single channel) running in NT ptp mode. Dunno if that helps. /Per Jessen, Zürich I have use this howto http://www.voip-info.org/wiki/view/Asterisk+zaphfc; , but i can´t put the card working in nt ptp mode. Can you explain me how i have to do that? Do you have any howto to make the card work in nt ptp mode? thanks for answer Short answert: signalling = bri_net Longer answer: That page is outdated (hmm, and I didn't get to update it :-( ) Nowadays (as of Asterisk 1.6.0) BRI support is included in Asterisk. The zaphfc driver, though, is still not included in DAHDI. It's maintained, though. The version included in the Debian packages is taken from http://git.tzafrir.org.il/?p=dahdi-extra.git;a=summary . Either way (bristuff or Asterisk = 1.6.0) to use BRI PTP NT in chan_dahdi you should set: signalling = bri_net for the span's channels in /etc/asterisk/chan_dahdi.conf . -- Tzafrir Cohen icq#16849755 jabber:tzafrir.co...@xorcom.com +972-50-7952406 mailto:tzafrir.co...@xorcom.com http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] HFC-S card
On 22 February 2010 13:02, Tzafrir Cohen tzafrir.co...@xorcom.com wrote: Nowadays (as of Asterisk 1.6.0) BRI support is included in Asterisk. The zaphfc driver, though, is still not included in DAHDI. It's maintained, though. The version included in the Debian packages is taken from http://git.tzafrir.org.il/?p=dahdi-extra.git;a=summary . I'm using CentOS5.4, can anyone advise how I can make DAHDi work with a generic HFC-S card? -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] HFC-S card
On 2/22/2010 1:02 PM, Tzafrir Cohen wrote: On Mon, Feb 22, 2010 at 12:22:39PM +, Pedro Santos wrote: On 2/22/2010 10:26 AM, Per Jessen wrote: Pedro Santos wrote: Does any one put a HFC-S card working in nt ptp mode? I've got an HFC-PCI (single channel) running in NT ptp mode. Dunno if that helps. /Per Jessen, Zürich I have use this howto http://www.voip-info.org/wiki/view/Asterisk+zaphfc; , but i can´t put the card working in nt ptp mode. Can you explain me how i have to do that? Do you have any howto to make the card work in nt ptp mode? thanks for answer Short answert: signalling = bri_net Longer answer: That page is outdated (hmm, and I didn't get to update it :-( ) Nowadays (as of Asterisk 1.6.0) BRI support is included in Asterisk. The zaphfc driver, though, is still not included in DAHDI. It's maintained, though. The version included in the Debian packages is taken from http://git.tzafrir.org.il/?p=dahdi-extra.git;a=summary . Either way (bristuff or Asterisk= 1.6.0) to use BRI PTP NT in chan_dahdi you should set: signalling = bri_net for the span's channels in /etc/asterisk/chan_dahdi.conf . I´m using centos 4.8 server, and i don't now how integrate zaphfc with dadhi -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] HFC-S card
Tzafrir Cohen wrote: On Mon, Feb 22, 2010 at 12:22:39PM +, Pedro Santos wrote: On 2/22/2010 10:26 AM, Per Jessen wrote: Pedro Santos wrote: Does any one put a HFC-S card working in nt ptp mode? I've got an HFC-PCI (single channel) running in NT ptp mode. Dunno if that helps. /Per Jessen, Zürich I have use this howto http://www.voip-info.org/wiki/view/Asterisk+zaphfc; , but i can´t put the card working in nt ptp mode. Can you explain me how i have to do that? Do you have any howto to make the card work in nt ptp mode? thanks for answer Short answert: signalling = bri_net Longer answer: That page is outdated (hmm, and I didn't get to update it :-( ) Nowadays (as of Asterisk 1.6.0) BRI support is included in Asterisk. The zaphfc driver, though, is still not included in DAHDI. It's maintained, though. The version included in the Debian packages is taken from http://git.tzafrir.org.il/?p=dahdi-extra.git;a=summary . Either way (bristuff or Asterisk = 1.6.0) to use BRI PTP NT in chan_dahdi you should set: signalling = bri_net for the span's channels in /etc/asterisk/chan_dahdi.conf . None of the above looks very familiar - I'm using Asterisk 1.4.x + misdn, one HFC-4S for the external lines and one plain (Conrad) HFS-PCI in NT mode for an ISDN DECT base-station. /Per Jessen, Zürich -- http://www.spamchek.com/ - your spam is our business. -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] HFC-S card
Does any one put a HFC-S card working in nt ptp mode? -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] HFC-S card
On Sun, Feb 21, 2010 at 07:55:39PM +, Pedro Santos wrote: Does any one put a HFC-S card working in nt ptp mode? Which version of Asterisk do you use? Which channel driver? -- Tzafrir Cohen icq#16849755 jabber:tzafrir.co...@xorcom.com +972-50-7952406 mailto:tzafrir.co...@xorcom.com http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] HFC-S card problems
Hello everybody, I'm having little trouble (well, pretty big trouble) with HFC-S card and Asterisk. My idea is to do VoIP/IAX link between two HW PBXen using two Asterisk PC boxen with ISDN cards in them. AFAIK HFC-S cards must be in NT mode for this installation, they must behave like state line for those HW PBXen. (if wrong, please correct me). Diagram follows: Internet Phone1-PBX1-ISDN[NT]-ASTERISK1--IAX--ASTERISK2-[NT]ISDN-PBX2-Phone2 The problem is: I don't even know if HFC-S cards are working. Module is loaded fine, everything seems OK but when I try to dial somewhere using Asterisk CLI nothing happens. (well it says no answer, but HW PBX doesn't even know that somebody is trying to dial - I've got sysphone with those nice LEDs and none of them is emiting light :) CLI dial 220 -- Executing Dial(OSS/dsp, Zap/1/36|10) in new stack -- Called 1/36 -- Channel 0/1, span 1 got hangup -- Hungup 'Zap/1-1' == No one is available to answer at this time When I do fast show channels, this is the result: CLI show channels Channel (ContextExtensionPri ) State Appl. Data Zap/1-1 (test s1 ) Dialing AppDial (Outgoing Line) OSS/dsp (test 220 1 ) Ringing Dial Zap/1/36|10 My Questions: Is there any application which can just dial somewhere or at least run some data through line? I just need to test that there's dataflow between HFC-S and PBX. I need something without hard setup, just simple test tool. Is there anybody who would be so kind to send me his/hers Asterisk/Zapata/Zaptel config files so I can check them with mine? I know, configs are somewhat personal stuff, but it will _very_ appreciated :) Here come all necessary information from my config files. Don't take them too seriosly, it's just a test config with no actual usage. BIG TNX in advance for at least some help: zaptel.conf --- defaultzone=nl loadzone=nl span=1,1,3,ccs,ami bchan=1,2 dchan=3 syslog -- PCI: Enabling device 00:0f.0 ( - 0003) zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xca8fd000 fifo 0xc6348000(0x6348000) IRQ 11 HZ 100 zaphfc: Card 0 configured for NT mode Registered Span 1 ('ZTHFC1') with 3 channels Span ('ZTHFC1') is new master zaphfc: 1 hfc-pci card(s) in this box. ztcfg -vv - SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1) Channel map: Channel 01: Individual Clear channel (Default) (Slaves: 01) Channel 02: Individual Clear channel (Default) (Slaves: 02) Channel 03: D-channel (Default) (Slaves: 03) 3 channels configured. zapata.conf --- [channels] language=en switchtype = euroisdn pridialplan=unknown prilocaldialplan=unknown signalling = bri_net_ptmp echocancel=yes immediate=no group = 1 context = test channel = 1 channel = 2 extensions.conf --- [test] exten = 210,1,Wait(1) exten = 210,2,Answer exten = 210,3,Playback(demo-congrats) exten = 210,4,Hangup exten = 220,1,Dial(Zap/1/36,10) Ufff. Hope that's it... Big thanx once more... --ZK - - ---[ CESKE TELEKOMUNIKACE ]-- - - Zdik Kudrle GSM: +420 604 781 414 HTTP: www.cesketelekomunikace.cz SMTP: [EMAIL PROTECTED] ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] HFC-S card for Australia?
On Wed, 2004-12-01 at 04:34, Craig Guy wrote: No it doesn't. The E100 is for a Primary Rate Interface (PRI), I am looking for something to support a Basic Rate Interface (BRI). Would prefer the card be passive. I have found that the DIVA Pro cards are available in Australia however I don't think they are supported by zaphfc. I haven't confirmed yet but I suspect that the bristuff + zaphfc combination will allow me to use the BRI as a zaptel interface which means I can use things like the Flash Operators Panel and possibly the Areski Management Portal (Won't be using DID's). There's a lot of * goodies out there that don't support chan_capi or chan_misdn. Somebody correct me if I'm wrong but if I can stay with zap channels then life will be easier for me. You are completely right, that zaphfc/HFC-S cards will give you zap devices on a BRI connection. Unfortunatly i don't know who is selling those A-ticked in .au. There are various of those cards out there. Billion, Jensen, ASUSTek, just to mention some of them. Check your local hardware store for regular ISDN cards and make sure, that the logo on the chipset are the towers of the Domchurch of Cologne. (Cologne Chip's logo, the HFC manufacturer). Here in Europe these cards are around 20-25 EUR/pc. Slán leat, Martin List-Petersen Dublin, Eire (contact info on -- http://www.marlow.dk/) ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] HFC-S card for Australia?
Is anyone aware of a HFC-S card available in Australia with A-tick approval? Current choices appear to be the traverse NetJet (ISDN4Linux only) and the AVM Fritz (CAPI). However I would strongly prefer to use something ZAP compatible with zaptel BRI and hence an HFC-S based card. Craig ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] HFC-S card for Australia?
Does the E100P (from digium) fit the bill, apart from the lack of A-Tick? PaulH -Original Message- From: Craig Guy [mailto:[EMAIL PROTECTED] Sent: Wednesday, 1 December 2004 2:59 PM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] HFC-S card for Australia? Is anyone aware of a HFC-S card available in Australia with A-tick approval? Current choices appear to be the traverse NetJet (ISDN4Linux only) and the AVM Fritz (CAPI). However I would strongly prefer to use something ZAP compatible with zaptel BRI and hence an HFC-S based card. Craig ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users CAUTION: This email message and accompanying data may contain information that is confidential. If you are not the intended recipient, you are notified that any use, dissemination, distribution or copying of this message or data is prohibited. If you have received this email message in error, please notify us immediately and erase all copies of this message and attachments. Thank you. CAUTION: This email message and accompanying data may contain information that is confidential. If you are not the intended recipient, you are notified that any use, dissemination, distribution or copying of this message or data is prohibited. If you have received this email message in error, please notify us immediately and erase all copies of this message and attachments. Thank you. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] HFC-S card for Australia?
No it doesn't. The E100 is for a Primary Rate Interface (PRI), I am looking for something to support a Basic Rate Interface (BRI). Would prefer the card be passive. I have found that the DIVA Pro cards are available in Australia however I don't think they are supported by zaphfc. I haven't confirmed yet but I suspect that the bristuff + zaphfc combination will allow me to use the BRI as a zaptel interface which means I can use things like the Flash Operators Panel and possibly the Areski Management Portal (Won't be using DID's). There's a lot of * goodies out there that don't support chan_capi or chan_misdn. Somebody correct me if I'm wrong but if I can stay with zap channels then life will be easier for me. Craig - Original Message - From: Paul Hales [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Wednesday, December 01, 2004 12:05 PM Subject: RE: [Asterisk-Users] HFC-S card for Australia? Does the E100P (from digium) fit the bill, apart from the lack of A-Tick? PaulH -Original Message- From: Craig Guy [mailto:[EMAIL PROTECTED] Sent: Wednesday, 1 December 2004 2:59 PM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] HFC-S card for Australia? Is anyone aware of a HFC-S card available in Australia with A-tick approval? Current choices appear to be the traverse NetJet (ISDN4Linux only) and the AVM Fritz (CAPI). However I would strongly prefer to use something ZAP compatible with zaptel BRI and hence an HFC-S based card. Craig ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users CAUTION: This email message and accompanying data may contain information that is confidential. If you are not the intended recipient, you are notified that any use, dissemination, distribution or copying of this message or data is prohibited. If you have received this email message in error, please notify us immediately and erase all copies of this message and attachments. Thank you. CAUTION: This email message and accompanying data may contain information that is confidential. If you are not the intended recipient, you are notified that any use, dissemination, distribution or copying of this message or data is prohibited. If you have received this email message in error, please notify us immediately and erase all copies of this message and attachments. Thank you. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] hfc-s card, brii-stuff.0.1.0-RC4a, zaphfc: sync lost, pci performance too low. you might have some cpu throtteling enabled.
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, debian sid kernel 2.6.7 cpu: AMD Duron(tm) Processor kernel.log: Aug 23 17:33:40 weblogin kernel: Zapata Telephony Interface Registered on major 196 Aug 23 17:33:40 weblogin kernel: zaphfc: no version for zt_receive found: kernel tainted. Aug 23 17:33:40 weblogin kernel: PCI: Found IRQ 10 for device :00:0a.0 Aug 23 17:33:40 weblogin kernel: PCI: Sharing IRQ 10 with :00:07.5 Aug 23 17:33:40 weblogin kernel: zaphfc: Digi International Digi DataFire Micro V (Europe) configured at mem 0xe091a000 fifo 0xcf598000(0xf598000) IRQ 10 HZ 1000 Aug 23 17:33:40 weblogin kernel: zaphfc: Card 0 configured for TE mode Aug 23 17:33:40 weblogin kernel: zaphfc: 1 hfc-pci card(s) in this box. Aug 23 17:33:40 weblogin kernel: Registered tone zone 11 (Italy) Aug 24 04:47:57 weblogin kernel: zaphfc: sync lost, pci performance too low. you might have some cpu throtteling enabled. should i add MARCH=i586 option to asterisk/Makefile ? any help will be very apreciated Maurizio - -- Maurizio Marini GSM +39-335-8259739 Work: +39-0721-855285 Fax +39-0721-859609 Home: +39-0721-950396 IAXTel: (700) 350-1234 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQFBKyzZ4Q/49nIJTlwRAjiiAJ9UDhQOtnYBHgGlWzFW1Red12siIACfQgDA 7v66QWgn3FpFbPopHngLQ40= =g8pe -END PGP SIGNATURE- ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] HFC-S card and Unable to create channel of type 'Zap'
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 hi, i'm new to * I've installed an hfc-s card (DIGI Micro V) with bristuff 0.0.2; when i try to call outside i get: -- Accepting AUTHENTICATED call from 192.168.1.110, requested format = 1024, actual format = 1024 -- Executing Dial([EMAIL PROTECTED]/2, Zap/g1/0123456) in new stack Jul 13 13:42:49 NOTICE[884752]: app_dial.c:559 dial_exec: Unable to create channel of type 'Zap' == Everyone is busy at this time Jul 13 13:43:07 WARNING[163851]: chan_zap.c:6070 zt_pri_error: PRI: Read on 19 failed: Unknown error 500 Jul 13 13:43:07 NOTICE[163851]: chan_zap.c:6976 pri_dchannel: PRI got event: 6 on span 1 - /etc/zaptel.conf loadzone=it defaultzone=it span=1,1,3,ccs,ami bchan=1-2 dchan=3 - ztcfg -v Zaptel Configuration == SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1) 3 channels configured. - /etc/asterisk/zapata.conf [channels] ; ; Default language ; ;language=en ; ; Default context ; ; switchtype = euroisdn ; p2mp TE mode signalling = bri_cpe_ptmp pridialplan = local prilocaldialplan = local echocancel=yes immediate=yes group = 1 context = local channel = 1-2 *CLI zap show channel 1 Channel: 1 File Descriptor: 17 Span: 1 Extension: Context: local Caller ID string: Destroy: 0 Signalling Type: PRI Signalling Owner: None Real: None Callwait: None Threeway: None Confno: -1 Propagated Conference: -1 Real in conference: 0 DSP: no Relax DTMF: no Dialing/CallwaitCAS: 0/0 Default law: alaw Fax Handled: no Pulse phone: no Echo Cancellation: 128 taps unless TDM bridged, currently OFF PRI Flags: Jul 13 14:20:55 WARNING[16384]: chan_zap.c:7351 zap_show_channel: Failed to get conference info on channel 1 Jul 13 14:20:55 WARNING[16384]: chan_zap.c:7357 zap_show_channel: Failed to get confmute info on channel 1 any help will be very apreciated 10x Maurizio - -- Maurizio Marini GSM +39-335-8259739 Work: +39-0721-855285 Fax +39-0721-859609 Home: +39-0721-950396 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQFA89R44Q/49nIJTlwRAtzBAJ9TPn4Hn6WKECiXYFr9Jnf3f0WrnwCePDX+ O1t5ts8wdlOzBU/HyqQpqh4= =Ujbh -END PGP SIGNATURE- ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] HFC-S card and Unable to create channel of type 'Zap'
Ciao ! are you connecting a phone or a pbcx to the isdn card ? Hello Maurizio, Tuesday, July 13, 2004, 2:24:24 PM, you wrote: MM -BEGIN PGP SIGNED MESSAGE- MM Hash: SHA1 MM hi, MM i'm new to * MM I've installed an hfc-s card (DIGI Micro V) with bristuff 0.0.2; MM when i try to call outside i get: MM-- Accepting AUTHENTICATED call from 192.168.1.110, MM requested format = 1024, actual format = 1024 MM -- Executing Dial([EMAIL PROTECTED]/2, Zap/g1/0123456) in new stack MM Jul 13 13:42:49 NOTICE[884752]: app_dial.c:559 dial_exec: MM Unable to create channel of type 'Zap' MM == Everyone is busy at this time MM Jul 13 13:43:07 WARNING[163851]: chan_zap.c:6070 MM zt_pri_error: PRI: Read on 19 failed: Unknown error 500 MM Jul 13 13:43:07 NOTICE[163851]: chan_zap.c:6976 pri_dchannel: PRI got event: 6 on span 1 MM - MM /etc/zaptel.conf MM loadzone=it MM defaultzone=it MM span=1,1,3,ccs,ami MM bchan=1-2 MM dchan=3 MM - MM ztcfg -v MM Zaptel Configuration MM == MM SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1) MM 3 channels configured. MM - MM /etc/asterisk/zapata.conf MM [channels] MM ; MM ; Default language MM ; MM ;language=en MM ; MM ; Default context MM ; MM ; MM switchtype = euroisdn MM ; p2mp TE mode MM signalling = bri_cpe_ptmp MM pridialplan = local MM prilocaldialplan = local MM echocancel=yes MM immediate=yes MM group = 1 MM context = local channel = 1-2 *CLI zap show channel 1 MM Channel: 1 MM File Descriptor: 17 MM Span: 1 MM Extension: MM Context: local MM Caller ID string: MM Destroy: 0 MM Signalling Type: PRI Signalling MM Owner: None MM Real: None MM Callwait: None MM Threeway: None MM Confno: -1 MM Propagated Conference: -1 MM Real in conference: 0 MM DSP: no MM Relax DTMF: no MM Dialing/CallwaitCAS: 0/0 MM Default law: alaw MM Fax Handled: no MM Pulse phone: no MM Echo Cancellation: 128 taps unless TDM bridged, currently OFF MM PRI Flags: MM Jul 13 14:20:55 WARNING[16384]: chan_zap.c:7351 MM zap_show_channel: Failed to get conference info on channel 1 MM Jul 13 14:20:55 WARNING[16384]: chan_zap.c:7357 MM zap_show_channel: Failed to get confmute info on channel 1 MM any help will be very apreciated MM 10x MM Maurizio -- Best regards, Alessiomailto:[EMAIL PROTECTED] ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] HFC-S card and Unable to create channel of type 'Zap'
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Tuesday 13 July 2004 14:41, Alessio Focardi wrote: Ciao ! are you connecting a phone or a pbcx to the isdn card ? simply, i'm connecting this isdn card to an nt1 plus to call outside... - -- Maurizio Marini GSM +39-335-8259739 Work: +39-0721-855285 Fax +39-0721-859609 Home: +39-0721-950396 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQFA898z4Q/49nIJTlwRAtjvAJ4graOK+ODpNyBmrvQiisKF5CVF3wCfbMJR jhsOV93kXX5p8Ygm1SgJDNY= =0oqd -END PGP SIGNATURE- ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users