Re: [asterisk-users] High delay and some echo

2019-06-21 Thread Michael Maier
On 11.06.19 at 20:32 Luca Bertoncello wrote:
> Hi list!
> 
> I use Asterisk 13.14.1 from Debian repository on a DSL from Deutsche
> Telekom.
> 
> Asterisk works well, but I have really often an high delay (I understand
> it since the other party speak some seconds before he hears my question
> and answer) and sometimes I hear an echo.

First of all: I'm using Deutsche Telekom, too (with pjsip on CentOS 7) and 
don't have this problem.

Let me sum up at first what I understand at the moment:
- Only VoIP
- The problem isn't new.
- The problem doesn't happen always, but often.
- Asterisk uses the internet IP and doesn't do NAT.
- You're using chan_sip - not pjsip
- DSL-Line: 50/10 MBit


My questions to analyze the problem:

- What's the real usable DSL sync (can be seen at the modem)?
- Are there any (CRC) errors on the DSL side? How many and in which time?
- Deutsche Telekom reports the usable bandwidth during pppoe login. In 
messages, you can see
  something like
  SRU=37868#SRD=102957# (it's an example for a 100 MBit line)
  (grep messages for "SRU=" after a successful pppoe login)
  It contains the upload and download bandwidth in kbit/s
- Did you configure traffic shaping with tc to be sure that voice packages are 
always sent at first?
- Problem can be seen with different callees or just with one?
- Are there any callees the problem never occurred?
- Is it "just" a delay or is it choppy, too?
- You're using Banana PI - which one exactly? RAM? eth interface manufacturer? 
What about the load
  (uptime) of the system when the problem occurs? Is it swapping (what says 
"free")?
- What about the temperature of the device if the problem occurs / not occurs?
- Is there any other outbound traffic at the same time? Check with the tool 
bmon at the ppp0
  device and take a look at the upstream. One call creates 50 packages/s (pps) 
on each direction (if there is no other traffic). It shouldn't fluctuate.
- Did you set the correct QoS-type for the outgoing sip and rtp packages? In 
pjsip, the options are:
  tos=cs3
  cos=3
  You can check it with wireshark. The DSCP must be expedited forwarding (or 
the same you can see for incoming voice packages).
- asterisk has an own console, that can be reached with asterisk -r as root.
  At this point, you can get some information about the quality of a running 
call. For pjsip it's reporting the following e.g.:

  *CLI> pjsip show channelstats

 ...Receive. 
.Transmit..
 BridgeId ChannelId  UpTime.. Codec.   CountLost Pct  Jitter   
CountLost Pct  Jitter RTT
 
===

 5d67cd0b x-007e   00:00:39 g722 1296   00   0.000   1299   
00   0.000   0.000
 5d67cd0b y-007f   00:00:39 alaw 1299   00   0.000   1296   
00   0.000   0.000

 Instead of "pjsip show channelstats" you have to use something like sip show 
[press 2 times tab key] to get the possible commands.

 Each call generates two entries: one for the call from your local phone to 
asterisk and the other from asterisk to the ISP.



Hope this helps to locate the problem.
Michael

-- 
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
  https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] High delay and some echo

2019-06-11 Thread Luca Bertoncello
Am 11.06.2019 um 21:28 schrieb Antony Stone:

Hi,

> Well, my starting point, given the hardware setup you've confirmed above, 
> would 
> be to plug an analogue phone into your FritzBox (assuming that's what DT gave 
> you) and see whether the problem exists without Asterisk in the picture at 
> all.

I don't have any FritzBox.
I have a little BananaPI with Debian 9 configured as Router and
connected to a DSL-Modem.
On the BananaPI I installed Asterisk, to have it directly connected to
the Internet.

> The second thing I would try is to put the SIP credentials given to you by DT 
> into the SIP phone itself (most can support at least two lines, so you don't 
> need to over-write the credentials for your Asterisk server account) and 
> again, soo whether the problem persists with the Asterisk server removed from 
> the signal path.

I can try it...
Now it's too late for the test. I'll try tomorrow.

> That will at least tell you whether Asterisk is causing the problem, because 
> if it isn't:
> 
> a) there isn't much you can do about it except report it to DT, and

Bwahahahahahah The technician of DT, at least the people answering
the Hotline, don't have any idea _WHAT_ is VoIP and so on...
They only can say "you have to power off your FritzBox, wait 30 seconds
and power it on again".
If I say, that I don't have any FritzBox they give a Brain core dumped...

> b) there's very little the good people here on this mailing list will be able 
> to help you with.

Really a pity... :(

> Just out of interest, what hardware are you running Asterisk on?  It's 
> unlikely to be the cause of the problem, because I've run it on Raspberry 
> Pies 
> for very small setups such as yours, but it might still be useful to know.

As I said, I have a BananaPI with a Debian 9, minimal installed from me
with some scripts to manage the DSL.
Asterisk was installed from Debian Repositories.

Thanks
Luca Bertoncello
(lucab...@lucabert.de)

-- 
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
  https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] High delay and some echo

2019-06-11 Thread Antony Stone
On Tuesday 11 June 2019 at 21:16:40, Luca Bertoncello wrote:

> Am 11.06.2019 um 21:10 schrieb Antony Stone:
> 
> Hi,
> 
> > So, you have a SIP phone, connected to an Asterisk server on your local
> > network, which then connects to D Telekom's SIP server over the DSL line?
> 
> Correct!
> 
> > Are they also using a SIP phone?
> 
> My mother yes, my father in law uses an ISDN phone connected to a
> FritzBox that convert the signal in VoIP.

> I must say, that I'm not an expert in VoIP, so I really don't know this
> tool and don't have any idea how to analyze the problem...

Well, my starting point, given the hardware setup you've confirmed above, would 
be to plug an analogue phone into your FritzBox (assuming that's what DT gave 
you) and see whether the problem exists without Asterisk in the picture at 
all.

The second thing I would try is to put the SIP credentials given to you by DT 
into the SIP phone itself (most can support at least two lines, so you don't 
need to over-write the credentials for your Asterisk server account) and 
again, soo whether the problem persists with the Asterisk server removed from 
the signal path.

That will at least tell you whether Asterisk is causing the problem, because 
if it isn't:

a) there isn't much you can do about it except report it to DT, and

b) there's very little the good people here on this mailing list will be able 
to help you with.

Just out of interest, what hardware are you running Asterisk on?  It's 
unlikely to be the cause of the problem, because I've run it on Raspberry Pies 
for very small setups such as yours, but it might still be useful to know.


Regards,


Antony.

-- 
BASIC is to computer languages what Roman numerals are to arithmetic.

   Please reply to the list;
 please *don't* CC me.

-- 
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
  https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] High delay and some echo

2019-06-11 Thread Luca Bertoncello
Am 11.06.2019 um 21:10 schrieb Antony Stone:

Hi,

> So, you have a SIP phone, connected to an Asterisk server on your local 
> network, which then connects to D Telekom's SIP server over the DSL line?

Correct!

>> The other party use VoIP, too, since they are in Germany (and Italy) and
>> here there are just VoIP... Sigh!
> 
> Are they also using a SIP phone?

My mother yes, my father in law uses an ISDN phone connected to a
FritzBox that convert the signal in VoIP.

> Do they also have an Asterisk server on their local network?
> 
>> Now I disabled the jitter (jbenable = no), and I called my father in
>> law. He sayd me, the quality is really better, but I hear sometimes
>> little noises...
>>
>> Any other suggestion?
> 
> Have you considered trying some tool such as http://sipcapture.org/#about to 
> see if you can identify where the latency comes in?

I must say, that I'm not an expert in VoIP, so I really don't know this
tool and don't have any idea how to analyze the problem...

Thanks
Luca Bertoncello
(lucab...@lucabert.de)

-- 
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
  https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] High delay and some echo

2019-06-11 Thread Antony Stone
On Tuesday 11 June 2019 at 20:53:09, Luca Bertoncello wrote:

> Am 11.06.2019 um 20:42 schrieb Antony Stone:
> 
> Hi Antony,
> 
> > I think the main question here is: how are you connecting Asterisk to the
> > telephone system?
> 
> Via VoIP...
> 
> > You mention that you're on DSL from Deutsche Telekom, but is the call
> > going over this DSL link to soem SIP provider, who then connects you to
> > the PSTN, or are you connecting Asterisk locally to the phone line via
> > some ATA device?
> 
> Deutsche Telekom uses since years just VoIP. No ISDN, PSTN, and so on... :(

Well, same as Net Cologne here where I am, but the cable modem I have still 
has PSTN sockets on it so you can connect analogue phones to it as well as 
speaking SIP to it.  I wasn't sure which you might be doing with your 
Asterisk.

> I'm connecting to the VoIP-Server of Deutsche Telekom via DSL (50Mbps
> down, 10Mbps up).

So, you have a SIP phone, connected to an Asterisk server on your local 
network, which then connects to D Telekom's SIP server over the DSL line?

> The other party use VoIP, too, since they are in Germany (and Italy) and
> here there are just VoIP... Sigh!

Are they also using a SIP phone?

Do they also have an Asterisk server on their local network?

> Now I disabled the jitter (jbenable = no), and I called my father in
> law. He sayd me, the quality is really better, but I hear sometimes
> little noises...
> 
> Any other suggestion?

Have you considered trying some tool such as http://sipcapture.org/#about to 
see if you can identify where the latency comes in?


Antony.

-- 
Schrödinger's rule of data integrity: the condition of any backup is unknown 
until a restore is attempted.

   Please reply to the list;
 please *don't* CC me.

-- 
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
  https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] High delay and some echo

2019-06-11 Thread Luca Bertoncello
Am 11.06.2019 um 20:42 schrieb Antony Stone:

Hi Antony,

> I think the main question here is: how are you connecting Asterisk to the 
> telephone system?

Via VoIP...

> You mention that you're on DSL from Deutsche Telekom, but is the call going 
> over this DSL link to soem SIP provider, who then connects you to the PSTN, 
> or 
> are you connecting Asterisk locally to the phone line via some ATA device?

Deutsche Telekom uses since years just VoIP. No ISDN, PSTN, and so on... :(
I'm connecting to the VoIP-Server of Deutsche Telekom via DSL (50Mbps
down, 10Mbps up).
The other party use VoIP, too, since they are in Germany (and Italy) and
here there are just VoIP... Sigh!

Now I disabled the jitter (jbenable = no), and I called my father in
law. He sayd me, the quality is really better, but I hear sometimes
little noises...

Any other suggestion?

Thanks
Luca Bertoncello
(lucab...@lucabert.de)

-- 
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
  https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] High delay and some echo

2019-06-11 Thread Antony Stone
On Tuesday 11 June 2019 at 20:32:49, Luca Bertoncello wrote:

> Hi list!
> 
> I use Asterisk 13.14.1 from Debian repository on a DSL from Deutsche
> Telekom.
> 
> Asterisk works well, but I have really often an high delay (I understand
> it since the other party speak some seconds before he hears my question
> and answer) and sometimes I hear an echo.

I think the main question here is: how are you connecting Asterisk to the 
telephone system?

You mention that you're on DSL from Deutsche Telekom, but is the call going 
over this DSL link to soem SIP provider, who then connects you to the PSTN, or 
are you connecting Asterisk locally to the phone line via some ATA device?

In fact, it's probably worth outlining your hardware arrangement as much as 
possible:

 - what sort of telephone are you using - analogue or SIP?
 - where is your Asterisk server - on your local network, or hosted elsewhere?
 - how is Asterisk connected to the PSTN?
 - are the people you're talking to on analogue landline phones, mobiles, or 
SIP phones?
 - anything else you can tell us along these lines would probably be helpful.

Oh, and what's the *upstream* bandwidth of your Telekom connection?


Antony.

-- 
A few words to be cautious of between American and English:
 - momentarily
 - suspenders
 - chips
 - pants
 - jelly
 - pavement
 - vest
 - pint (and gallon)
 - pissed


   Please reply to the list;
 please *don't* CC me.

-- 
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
  https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

[asterisk-users] High delay and some echo

2019-06-11 Thread Luca Bertoncello
Hi list!

I use Asterisk 13.14.1 from Debian repository on a DSL from Deutsche
Telekom.

Asterisk works well, but I have really often an high delay (I understand
it since the other party speak some seconds before he hears my question
and answer) and sometimes I hear an echo.

I really don't know what can I check and what can be the problem.
The problem exists since a very long time, but in the last months it got
worse...

Thank you for your help, I can send abstracts of my configuration, if
you say me what should I send.

Luca Bertoncello
(lucab...@lucabert.de)

-- 
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
  https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users