Dear Jared;
Any web in english?
From where I can buy it?
Regards
Bilal
--
On Thu, 2008-06-12 at 01:23 -0700, bilal ghayyad wrote:
Where did u find a good IAX IP Phone?
I've had good success with my Allnet IP-7960 phones. They have the
ability in the firmware to either do
bilal ghayyad schreef:
Dear Jared;
Any web in english?
translate.google.com?
Ron
From where I can buy it?
Regards
Bilal
--
On Thu, 2008-06-12 at 01:23 -0700, bilal ghayyad wrote:
Where did u find a good IAX IP Phone?
I've had good success with my Allnet
The site is x100p.com and I have bought the s100fx from them. It works fine
for me.
My intention was to use as a remote extension. Just be aware it will
*NOT*accept domain name ONLY IP addresses. So if your server is a
dynamic IP
addresses you have use the public IP address and for some folks this
Hi Hans,
Can't you leave the picking up of the cli to the isdn line?
Even if it is an ISDN1 (just a B-channel and a D-channel),
the chances of tranferring channel info, like CLI, is better.
If a call comes in over the POTS line, then I still need to get CLI over it.
I'm not sure if the ISDN
Hi;
I would like just to know one thing:
Where did u find a good IAX IP Phone?
I am looking in the market since long time to buy such
device and did not find a reliable one till now.
Any advise?
Regards
Bilal
---
Hi,
I've been asked to spec up a small Asterisk
bilal ghayyad wrote:
I would like just to know one thing:
Where did u find a good IAX IP Phone?
I am looking in the market since long time to buy such device
and did not find a reliable one till now.
Any advise?
I haven't tried any yet; but http://x100p.eu have a few for sale; plus
On Thu, 2008-06-12 at 01:23 -0700, bilal ghayyad wrote:
Where did u find a good IAX IP Phone?
I've had good success with my Allnet IP-7960 phones. They have the
ability in the firmware to either do SIP or IAX, and they even have a
mode where you dial one prefix to send the call out using the
Hi,
I've been asked to spec up a small Asterisk system, which needs to:
- Connect to ISDN2e (I'm thinking of using a B100P card here)
- Connect to the POTS (A400P with 1 FXO)
- Allow remote phones (thinking of an ETC 6050 utilising IAX2)
It is a requirement that the POTS analogue card picks
On Wed, 2008-06-11 at 16:30 +0100, Ade Vickers wrote:
Hi,
I've been asked to spec up a small Asterisk system, which needs to:
- Connect to ISDN2e (I'm thinking of using a B100P card here)
- Connect to the POTS (A400P with 1 FXO)
- Allow remote phones (thinking of an ETC 6050 utilising
