[asterisk-users] PRI problems - no D channel
Hey guys: I am having a bit of a problem with our PRI under Asterisk. I am seeing the following error every 10 seconds... Aug 17 08:54:55 WARNING[2458]: chan_zap.c:2289 pri_find_dchan: No D-channels available! Using Primary channel 24 as D-channel anyway! Of course, I have the d-chan defined in /etc/zaptel.conf... loadzone = us span=1,1,0,esf,b8zs bchan=1-23 dchan=24 Neat thing is: this worked yesterday and isn't working today (Asterisk isn't answering the PRI on any inbound DID). zttool shows no problems with the T100 and no alarm conditions. The PRI is being drove by an Adtran Atlas. HELP! Ron Gage - Westland MI [EMAIL PROTECTED] This message was sent using IMP, the Internet Messaging Program. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] PRI problems - no D channel
What is the PRI connected to: What hardware for the T1? What Motherboard? On 8/17/06, Ron Gage [EMAIL PROTECTED] wrote: Hey guys: I am having a bit of a problem with our PRI under Asterisk. I am seeing the following error every 10 seconds... Aug 17 08:54:55 WARNING[2458]: chan_zap.c:2289 pri_find_dchan: No D-channels available! Using Primary channel 24 as D-channel anyway! Of course, I have the d-chan defined in /etc/zaptel.conf... loadzone = us span=1,1,0,esf,b8zs bchan=1-23 dchan=24 Neat thing is: this worked yesterday and isn't working today (Asterisk isn't answering the PRI on any inbound DID). zttool shows no problems with the T100 and no alarm conditions. The PRI is being drove by an Adtran Atlas. HELP! Ron Gage - Westland MI [EMAIL PROTECTED] This message was sent using IMP, the Internet Messaging Program. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] PRI problems - no D channel
The PRI is connected at one end to an Adtran Atlas, I believe a 600. The other end of the PRI is connected to a Digium T100. The two are seperated by roughly 10 foot of cat-5. Motherboard is whatever Dell put into their Precision 530MT line of workstations. Like I said, it worked just fine yesterday and today I am getting D-Channel errors. Thanks for your assistance! Ron Quoting C F [EMAIL PROTECTED]: What is the PRI connected to: What hardware for the T1? What Motherboard? On 8/17/06, Ron Gage [EMAIL PROTECTED] wrote: Hey guys: I am having a bit of a problem with our PRI under Asterisk. I am seeing the following error every 10 seconds... Aug 17 08:54:55 WARNING[2458]: chan_zap.c:2289 pri_find_dchan: No D-channels available! Using Primary channel 24 as D-channel anyway! Of course, I have the d-chan defined in /etc/zaptel.conf... loadzone = us span=1,1,0,esf,b8zs bchan=1-23 dchan=24 Neat thing is: this worked yesterday and isn't working today (Asterisk isn't answering the PRI on any inbound DID). zttool shows no problems with the T100 and no alarm conditions. The PRI is being drove by an Adtran Atlas. HELP! Ron Gage - Westland MI [EMAIL PROTECTED] This message was sent using IMP, the Internet Messaging Program. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users Ron Gage - Westland MI [EMAIL PROTECTED] This message was sent using IMP, the Internet Messaging Program. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] PRI problems - no D channel
My guess is it's some Intel mobo. Did you restart the system since? If you did that might be the problem, try restarting and unplug the power for at least 60 seconds before powering it back up. On 8/17/06, Ron Gage [EMAIL PROTECTED] wrote: The PRI is connected at one end to an Adtran Atlas, I believe a 600. The other end of the PRI is connected to a Digium T100. The two are seperated by roughly 10 foot of cat-5. Motherboard is whatever Dell put into their Precision 530MT line of workstations. Like I said, it worked just fine yesterday and today I am getting D-Channel errors. Thanks for your assistance! Ron Quoting C F [EMAIL PROTECTED]: What is the PRI connected to: What hardware for the T1? What Motherboard? On 8/17/06, Ron Gage [EMAIL PROTECTED] wrote: Hey guys: I am having a bit of a problem with our PRI under Asterisk. I am seeing the following error every 10 seconds... Aug 17 08:54:55 WARNING[2458]: chan_zap.c:2289 pri_find_dchan: No D-channels available! Using Primary channel 24 as D-channel anyway! Of course, I have the d-chan defined in /etc/zaptel.conf... loadzone = us span=1,1,0,esf,b8zs bchan=1-23 dchan=24 Neat thing is: this worked yesterday and isn't working today (Asterisk isn't answering the PRI on any inbound DID). zttool shows no problems with the T100 and no alarm conditions. The PRI is being drove by an Adtran Atlas. HELP! Ron Gage - Westland MI [EMAIL PROTECTED] This message was sent using IMP, the Internet Messaging Program. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users Ron Gage - Westland MI [EMAIL PROTECTED] This message was sent using IMP, the Internet Messaging Program. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] PRI problems - no D channel
Quoting C F [EMAIL PROTECTED]: My guess is it's some Intel mobo. Did you restart the system since? If you did that might be the problem, try restarting and unplug the power for at least 60 seconds before powering it back up. That was the first thing I tried: first trying to unload/reload the wct1xxp and zaptel modules, then reload them, then tried rebooting the computer (multiple times), then this morning, I gave it a 30 minute time out. No effect - still getting the D-chan errors. Unfortunately, the system is some 90 miles north of here so I can't verify if anything on the Adtran has changed or not (or reseat cables). My remote hands aren't available right now either so I can't verify anything regarding the circuit at this time. The fact that I am not getting any error reports at all about the transport (HDLC type errors) tends to make me think that the circuit is fine. I would have to imagine that if the channel switched from PRI to T1 it would throw all kinds of errors. Same thing if the signaling or buildout or what not was incorrect. The only errors I am seeing are the ones about the D channel not being there, and one (probably quite related) about head of queue has not been transmitted yet. Ron On 8/17/06, Ron Gage [EMAIL PROTECTED] wrote: The PRI is connected at one end to an Adtran Atlas, I believe a 600. The other end of the PRI is connected to a Digium T100. The two are seperated by roughly 10 foot of cat-5. Motherboard is whatever Dell put into their Precision 530MT line of workstations. Like I said, it worked just fine yesterday and today I am getting D-Channel errors. Thanks for your assistance! Ron Quoting C F [EMAIL PROTECTED]: What is the PRI connected to: What hardware for the T1? What Motherboard? On 8/17/06, Ron Gage [EMAIL PROTECTED] wrote: Hey guys: I am having a bit of a problem with our PRI under Asterisk. I am seeing the following error every 10 seconds... Aug 17 08:54:55 WARNING[2458]: chan_zap.c:2289 pri_find_dchan: No D-channels available! Using Primary channel 24 as D-channel anyway! Of course, I have the d-chan defined in /etc/zaptel.conf... loadzone = us span=1,1,0,esf,b8zs bchan=1-23 dchan=24 Neat thing is: this worked yesterday and isn't working today (Asterisk isn't answering the PRI on any inbound DID). zttool shows no problems with the T100 and no alarm conditions. The PRI is being drove by an Adtran Atlas. HELP! Ron Gage - Westland MI [EMAIL PROTECTED] This message was sent using IMP, the Internet Messaging Program. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users Ron Gage - Westland MI [EMAIL PROTECTED] This message was sent using IMP, the Internet Messaging Program. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users Ron Gage - Westland MI [EMAIL PROTECTED] This message was sent using IMP, the Internet Messaging Program. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] PRI problems - no D channel
Heh...everytime I have lost the D channel it has always been on the provider end. - Original Message - From: Ron Gage [EMAIL PROTECTED] To: asterisk-users@lists.digium.com Sent: Thursday, August 17, 2006 2:32 PM Subject: Re: [asterisk-users] PRI problems - no D channel Quoting C F [EMAIL PROTECTED]: My guess is it's some Intel mobo. Did you restart the system since? If you did that might be the problem, try restarting and unplug the power for at least 60 seconds before powering it back up. That was the first thing I tried: first trying to unload/reload the wct1xxp and zaptel modules, then reload them, then tried rebooting the computer (multiple times), then this morning, I gave it a 30 minute time out. No effect - still getting the D-chan errors. Unfortunately, the system is some 90 miles north of here so I can't verify if anything on the Adtran has changed or not (or reseat cables). My remote hands aren't available right now either so I can't verify anything regarding the circuit at this time. The fact that I am not getting any error reports at all about the transport (HDLC type errors) tends to make me think that the circuit is fine. I would have to imagine that if the channel switched from PRI to T1 it would throw all kinds of errors. Same thing if the signaling or buildout or what not was incorrect. The only errors I am seeing are the ones about the D channel not being there, and one (probably quite related) about head of queue has not been transmitted yet. Ron On 8/17/06, Ron Gage [EMAIL PROTECTED] wrote: The PRI is connected at one end to an Adtran Atlas, I believe a 600. The other end of the PRI is connected to a Digium T100. The two are seperated by roughly 10 foot of cat-5. Motherboard is whatever Dell put into their Precision 530MT line of workstations. Like I said, it worked just fine yesterday and today I am getting D-Channel errors. Thanks for your assistance! Ron Quoting C F [EMAIL PROTECTED]: What is the PRI connected to: What hardware for the T1? What Motherboard? On 8/17/06, Ron Gage [EMAIL PROTECTED] wrote: Hey guys: I am having a bit of a problem with our PRI under Asterisk. I am seeing the following error every 10 seconds... Aug 17 08:54:55 WARNING[2458]: chan_zap.c:2289 pri_find_dchan: No D-channels available! Using Primary channel 24 as D-channel anyway! Of course, I have the d-chan defined in /etc/zaptel.conf... loadzone = us span=1,1,0,esf,b8zs bchan=1-23 dchan=24 Neat thing is: this worked yesterday and isn't working today (Asterisk isn't answering the PRI on any inbound DID). zttool shows no problems with the T100 and no alarm conditions. The PRI is being drove by an Adtran Atlas. HELP! Ron Gage - Westland MI [EMAIL PROTECTED] This message was sent using IMP, the Internet Messaging Program. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users Ron Gage - Westland MI [EMAIL PROTECTED] This message was sent using IMP, the Internet Messaging Program. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users Ron Gage - Westland MI [EMAIL PROTECTED] This message was sent using IMP, the Internet Messaging Program. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.405 / Virus Database: 268.11.1/421 - Release Date: 8/16/2006 ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] PRI problems - no D channel
What does the telco say when they test the circuit? Bill -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ron Gage Sent: Thursday, August 17, 2006 2:32 PM To: asterisk-users@lists.digium.com Subject: Re: [asterisk-users] PRI problems - no D channel Quoting C F [EMAIL PROTECTED]: My guess is it's some Intel mobo. Did you restart the system since? If you did that might be the problem, try restarting and unplug the power for at least 60 seconds before powering it back up. That was the first thing I tried: first trying to unload/reload the wct1xxp and zaptel modules, then reload them, then tried rebooting the computer (multiple times), then this morning, I gave it a 30 minute time out. No effect - still getting the D-chan errors. Unfortunately, the system is some 90 miles north of here so I can't verify if anything on the Adtran has changed or not (or reseat cables). My remote hands aren't available right now either so I can't verify anything regarding the circuit at this time. The fact that I am not getting any error reports at all about the transport (HDLC type errors) tends to make me think that the circuit is fine. I would have to imagine that if the channel switched from PRI to T1 it would throw all kinds of errors. Same thing if the signaling or buildout or what not was incorrect. The only errors I am seeing are the ones about the D channel not being there, and one (probably quite related) about head of queue has not been transmitted yet. Ron On 8/17/06, Ron Gage [EMAIL PROTECTED] wrote: The PRI is connected at one end to an Adtran Atlas, I believe a 600. The other end of the PRI is connected to a Digium T100. The two are seperated by roughly 10 foot of cat-5. Motherboard is whatever Dell put into their Precision 530MT line of workstations. Like I said, it worked just fine yesterday and today I am getting D-Channel errors. Thanks for your assistance! Ron Quoting C F [EMAIL PROTECTED]: What is the PRI connected to: What hardware for the T1? What Motherboard? On 8/17/06, Ron Gage [EMAIL PROTECTED] wrote: Hey guys: I am having a bit of a problem with our PRI under Asterisk. I am seeing the following error every 10 seconds... Aug 17 08:54:55 WARNING[2458]: chan_zap.c:2289 pri_find_dchan: No D-channels available! Using Primary channel 24 as D-channel anyway! Of course, I have the d-chan defined in /etc/zaptel.conf... loadzone = us span=1,1,0,esf,b8zs bchan=1-23 dchan=24 Neat thing is: this worked yesterday and isn't working today (Asterisk isn't answering the PRI on any inbound DID). zttool shows no problems with the T100 and no alarm conditions. The PRI is being drove by an Adtran Atlas. HELP! Ron Gage - Westland MI [EMAIL PROTECTED] This message was sent using IMP, the Internet Messaging Program. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users Ron Gage - Westland MI [EMAIL PROTECTED] This message was sent using IMP, the Internet Messaging Program. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users Ron Gage - Westland MI [EMAIL PROTECTED] This message was sent using IMP, the Internet Messaging Program. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] PRI problems - no D channel
Quoting Bill Gibbs [EMAIL PROTECTED]: What does the telco say when they test the circuit? Bill Bill: I am having my remote hands check first on the Adtran that is feeding the Asterisk box, then then go upstream from there. Thanks for helping me see the obvious path to follow! :) Ron -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ron Gage Sent: Thursday, August 17, 2006 2:32 PM To: asterisk-users@lists.digium.com Subject: Re: [asterisk-users] PRI problems - no D channel Quoting C F [EMAIL PROTECTED]: My guess is it's some Intel mobo. Did you restart the system since? If you did that might be the problem, try restarting and unplug the power for at least 60 seconds before powering it back up. That was the first thing I tried: first trying to unload/reload the wct1xxp and zaptel modules, then reload them, then tried rebooting the computer (multiple times), then this morning, I gave it a 30 minute time out. No effect - still getting the D-chan errors. Unfortunately, the system is some 90 miles north of here so I can't verify if anything on the Adtran has changed or not (or reseat cables). My remote hands aren't available right now either so I can't verify anything regarding the circuit at this time. The fact that I am not getting any error reports at all about the transport (HDLC type errors) tends to make me think that the circuit is fine. I would have to imagine that if the channel switched from PRI to T1 it would throw all kinds of errors. Same thing if the signaling or buildout or what not was incorrect. The only errors I am seeing are the ones about the D channel not being there, and one (probably quite related) about head of queue has not been transmitted yet. Ron On 8/17/06, Ron Gage [EMAIL PROTECTED] wrote: The PRI is connected at one end to an Adtran Atlas, I believe a 600. The other end of the PRI is connected to a Digium T100. The two are seperated by roughly 10 foot of cat-5. Motherboard is whatever Dell put into their Precision 530MT line of workstations. Like I said, it worked just fine yesterday and today I am getting D-Channel errors. Thanks for your assistance! Ron Quoting C F [EMAIL PROTECTED]: What is the PRI connected to: What hardware for the T1? What Motherboard? On 8/17/06, Ron Gage [EMAIL PROTECTED] wrote: Hey guys: I am having a bit of a problem with our PRI under Asterisk. I am seeing the following error every 10 seconds... Aug 17 08:54:55 WARNING[2458]: chan_zap.c:2289 pri_find_dchan: No D-channels available! Using Primary channel 24 as D-channel anyway! Of course, I have the d-chan defined in /etc/zaptel.conf... loadzone = us span=1,1,0,esf,b8zs bchan=1-23 dchan=24 Neat thing is: this worked yesterday and isn't working today (Asterisk isn't answering the PRI on any inbound DID). zttool shows no problems with the T100 and no alarm conditions. The PRI is being drove by an Adtran Atlas. HELP! Ron Gage - Westland MI [EMAIL PROTECTED] This message was sent using IMP, the Internet Messaging Program. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users Ron Gage - Westland MI [EMAIL PROTECTED] This message was sent using IMP, the Internet Messaging Program. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users Ron Gage - Westland MI [EMAIL PROTECTED] This message was sent using IMP, the Internet Messaging Program. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users Ron Gage - Westland MI [EMAIL PROTECTED
RE: [asterisk-users] PRI problems - no D channel
I know but you could save some time and have it tested while waiting...they might find a problem and save you a lot of headache. I can tell you are one of the rare people who actually checks their stuff before calling anyone but like another posted said, D Channels tend to be provider related for some reason! -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ron Gage Sent: Thursday, August 17, 2006 3:29 PM To: asterisk-users@lists.digium.com Subject: RE: [asterisk-users] PRI problems - no D channel Quoting Bill Gibbs [EMAIL PROTECTED]: What does the telco say when they test the circuit? Bill Bill: I am having my remote hands check first on the Adtran that is feeding the Asterisk box, then then go upstream from there. Thanks for helping me see the obvious path to follow! :) Ron -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ron Gage Sent: Thursday, August 17, 2006 2:32 PM To: asterisk-users@lists.digium.com Subject: Re: [asterisk-users] PRI problems - no D channel Quoting C F [EMAIL PROTECTED]: My guess is it's some Intel mobo. Did you restart the system since? If you did that might be the problem, try restarting and unplug the power for at least 60 seconds before powering it back up. That was the first thing I tried: first trying to unload/reload the wct1xxp and zaptel modules, then reload them, then tried rebooting the computer (multiple times), then this morning, I gave it a 30 minute time out. No effect - still getting the D-chan errors. Unfortunately, the system is some 90 miles north of here so I can't verify if anything on the Adtran has changed or not (or reseat cables). My remote hands aren't available right now either so I can't verify anything regarding the circuit at this time. The fact that I am not getting any error reports at all about the transport (HDLC type errors) tends to make me think that the circuit is fine. I would have to imagine that if the channel switched from PRI to T1 it would throw all kinds of errors. Same thing if the signaling or buildout or what not was incorrect. The only errors I am seeing are the ones about the D channel not being there, and one (probably quite related) about head of queue has not been transmitted yet. Ron On 8/17/06, Ron Gage [EMAIL PROTECTED] wrote: The PRI is connected at one end to an Adtran Atlas, I believe a 600. The other end of the PRI is connected to a Digium T100. The two are seperated by roughly 10 foot of cat-5. Motherboard is whatever Dell put into their Precision 530MT line of workstations. Like I said, it worked just fine yesterday and today I am getting D-Channel errors. Thanks for your assistance! Ron Quoting C F [EMAIL PROTECTED]: What is the PRI connected to: What hardware for the T1? What Motherboard? On 8/17/06, Ron Gage [EMAIL PROTECTED] wrote: Hey guys: I am having a bit of a problem with our PRI under Asterisk. I am seeing the following error every 10 seconds... Aug 17 08:54:55 WARNING[2458]: chan_zap.c:2289 pri_find_dchan: No D-channels available! Using Primary channel 24 as D-channel anyway! Of course, I have the d-chan defined in /etc/zaptel.conf... loadzone = us span=1,1,0,esf,b8zs bchan=1-23 dchan=24 Neat thing is: this worked yesterday and isn't working today (Asterisk isn't answering the PRI on any inbound DID). zttool shows no problems with the T100 and no alarm conditions. The PRI is being drove by an Adtran Atlas. HELP! Ron Gage - Westland MI [EMAIL PROTECTED] This message was sent using IMP, the Internet Messaging Program. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users Ron Gage - Westland MI [EMAIL PROTECTED] This message was sent using IMP, the Internet Messaging Program. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users Ron Gage - Westland MI [EMAIL PROTECTED
RE: [asterisk-users] PRI problems - no D channel
Quoting Bill Gibbs [EMAIL PROTECTED]: I know but you could save some time and have it tested while waiting...they might find a problem and save you a lot of headache. I can tell you are one of the rare people who actually checks their stuff before calling anyone but like another posted said, D Channels tend to be provider related for some reason! Very true that is - I just like to be 1000% certain that I am not causing my own headaches! Yes, it's a bit time consuming but it tends to save heavily on the crow when it comes time to figure out where the problem actually lies. Plus it really helps to have all your ducks in a row when dealing with an ILEC - they just don't seem to have much of a sense of humor about these things. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ron Gage Sent: Thursday, August 17, 2006 3:29 PM To: asterisk-users@lists.digium.com Subject: RE: [asterisk-users] PRI problems - no D channel Quoting Bill Gibbs [EMAIL PROTECTED]: What does the telco say when they test the circuit? Bill Bill: I am having my remote hands check first on the Adtran that is feeding the Asterisk box, then then go upstream from there. Thanks for helping me see the obvious path to follow! :) Ron -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ron Gage Sent: Thursday, August 17, 2006 2:32 PM To: asterisk-users@lists.digium.com Subject: Re: [asterisk-users] PRI problems - no D channel Quoting C F [EMAIL PROTECTED]: My guess is it's some Intel mobo. Did you restart the system since? If you did that might be the problem, try restarting and unplug the power for at least 60 seconds before powering it back up. That was the first thing I tried: first trying to unload/reload the wct1xxp and zaptel modules, then reload them, then tried rebooting the computer (multiple times), then this morning, I gave it a 30 minute time out. No effect - still getting the D-chan errors. Unfortunately, the system is some 90 miles north of here so I can't verify if anything on the Adtran has changed or not (or reseat cables). My remote hands aren't available right now either so I can't verify anything regarding the circuit at this time. The fact that I am not getting any error reports at all about the transport (HDLC type errors) tends to make me think that the circuit is fine. I would have to imagine that if the channel switched from PRI to T1 it would throw all kinds of errors. Same thing if the signaling or buildout or what not was incorrect. The only errors I am seeing are the ones about the D channel not being there, and one (probably quite related) about head of queue has not been transmitted yet. Ron On 8/17/06, Ron Gage [EMAIL PROTECTED] wrote: The PRI is connected at one end to an Adtran Atlas, I believe a 600. The other end of the PRI is connected to a Digium T100. The two are seperated by roughly 10 foot of cat-5. Motherboard is whatever Dell put into their Precision 530MT line of workstations. Like I said, it worked just fine yesterday and today I am getting D-Channel errors. Thanks for your assistance! Ron Quoting C F [EMAIL PROTECTED]: What is the PRI connected to: What hardware for the T1? What Motherboard? On 8/17/06, Ron Gage [EMAIL PROTECTED] wrote: Hey guys: I am having a bit of a problem with our PRI under Asterisk. I am seeing the following error every 10 seconds... Aug 17 08:54:55 WARNING[2458]: chan_zap.c:2289 pri_find_dchan: No D-channels available! Using Primary channel 24 as D-channel anyway! Of course, I have the d-chan defined in /etc/zaptel.conf... loadzone = us span=1,1,0,esf,b8zs bchan=1-23 dchan=24 Neat thing is: this worked yesterday and isn't working today (Asterisk isn't answering the PRI on any inbound DID). zttool shows no problems with the T100 and no alarm conditions. The PRI is being drove by an Adtran Atlas. HELP! Ron Gage - Westland MI [EMAIL PROTECTED] This message was sent using IMP, the Internet Messaging Program. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users Ron Gage - Westland MI [EMAIL PROTECTED] This message was sent using IMP, the Internet Messaging Program. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com
Re: [asterisk-users] PRI problems - no D channel
Did you actualy pull the power cable on the box? or just have it off for a while? you should let it sit for like 2 minutes without *any* power whatsoever. Not just in off state. On 8/17/06, Ron Gage [EMAIL PROTECTED] wrote: Quoting C F [EMAIL PROTECTED]: My guess is it's some Intel mobo. Did you restart the system since? If you did that might be the problem, try restarting and unplug the power for at least 60 seconds before powering it back up. That was the first thing I tried: first trying to unload/reload the wct1xxp and zaptel modules, then reload them, then tried rebooting the computer (multiple times), then this morning, I gave it a 30 minute time out. No effect - still getting the D-chan errors. Unfortunately, the system is some 90 miles north of here so I can't verify if anything on the Adtran has changed or not (or reseat cables). My remote hands aren't available right now either so I can't verify anything regarding the circuit at this time. The fact that I am not getting any error reports at all about the transport (HDLC type errors) tends to make me think that the circuit is fine. I would have to imagine that if the channel switched from PRI to T1 it would throw all kinds of errors. Same thing if the signaling or buildout or what not was incorrect. The only errors I am seeing are the ones about the D channel not being there, and one (probably quite related) about head of queue has not been transmitted yet. Ron On 8/17/06, Ron Gage [EMAIL PROTECTED] wrote: The PRI is connected at one end to an Adtran Atlas, I believe a 600. The other end of the PRI is connected to a Digium T100. The two are seperated by roughly 10 foot of cat-5. Motherboard is whatever Dell put into their Precision 530MT line of workstations. Like I said, it worked just fine yesterday and today I am getting D-Channel errors. Thanks for your assistance! Ron Quoting C F [EMAIL PROTECTED]: What is the PRI connected to: What hardware for the T1? What Motherboard? On 8/17/06, Ron Gage [EMAIL PROTECTED] wrote: Hey guys: I am having a bit of a problem with our PRI under Asterisk. I am seeing the following error every 10 seconds... Aug 17 08:54:55 WARNING[2458]: chan_zap.c:2289 pri_find_dchan: No D-channels available! Using Primary channel 24 as D-channel anyway! Of course, I have the d-chan defined in /etc/zaptel.conf... loadzone = us span=1,1,0,esf,b8zs bchan=1-23 dchan=24 Neat thing is: this worked yesterday and isn't working today (Asterisk isn't answering the PRI on any inbound DID). zttool shows no problems with the T100 and no alarm conditions. The PRI is being drove by an Adtran Atlas. HELP! Ron Gage - Westland MI [EMAIL PROTECTED] This message was sent using IMP, the Internet Messaging Program. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users Ron Gage - Westland MI [EMAIL PROTECTED] This message was sent using IMP, the Internet Messaging Program. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users Ron Gage - Westland MI [EMAIL PROTECTED] This message was sent using IMP, the Internet Messaging Program. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users