Re: [asterisk-users] Paging systems?

2019-03-22 Thread Evan P. Hall 
If you read the manual carefully, it is talking about connecting to a loop 
start trunk port (FXO), not a station port (FXS).  The paging unit is not 
expecting ring voltage and may get damaged if you send it.  In all of the 
scenarios it outlines, the paging system is generating the battery and dial 
tone and expecting the phone or the PBX to simply go off hook and then dial a 
zone.

You’ll need an ATA with an FXO port (like a Grandstream HT813) and then dial 
the desired zone number out that trunk.

-Evan

From: asterisk-users  on behalf of 
Bryant Zimmerman 
Reply-To: "brya...@granddial.com" , Asterisk Users 
Mailing List - Non-Commercial Discussion 
Date: Thursday, March 21, 2019 at 8:40 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion 

Subject: Re: [asterisk-users] Paging systems?

Michael

Based on how I read the manual if you connect the TIP and RING of the ATA to 
the right pairs you should be able to send a call to the paging box. It looks 
that when the page call is picked up by the paging system you would then press 
a zone 1-9 or 0 for all.  The page would then bridge to the desired zone. the 
page would complete when the call is hung up. You would likely need to make 
sure the ATA is using current loop disconnect or reverse to ensure hang-up.

I think it should be the PABX config using the Figure 3 configuration.

Best of luck

Bryant Zimmerman

Sr. Systems Architect
Grand Dial Communications, A ZK Tech Inc. Company
616-299-5607 (mobile)
616-855-1030 Ext. 2003 (office)


From: Michael Munger 
Sent: 3/21/19 7:33 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion 
, John Novack 
Subject: Re: [asterisk-users] Paging systems?
Excellent point.
This is it: https://www.valcom.com/pdf/v-1109rthf.pdf
Get Outlook for Android<https://aka.ms/ghei36>




On Thu, Mar 21, 2019 at 7:22 PM -0400, "John Novack"  
mailto:jnov...@comcast.net>> wrote:



Michael Munger wrote:
Does anyone have an (overhead) paging system that they like that works with SIP?

We’ve got a client with an old paging system that (supposedly) just takes an 
rj11 POTS connection, but when we put an SPA Cisco adapter on it, it doesn’t 
auto-answer the call, so paging never happens.

Does it expect to see a POTS line with battery on it?
Then a Cisco or other ATA that would work to supply service to a POTS phone 
should work
OR:
Does it expect to see a POTS connection from a PBX trunk, and supply battery TO 
the trunk?
Then you would need a Cisco or other ATA with an FXO connection.

Both types of paging systems have been made and both styles of connections have 
existed through the last 30 + years, and since you haven't revealed the brand 
and model of paging system it makes troubleshooting difficult.
Using the existing system can be made to work
I use a very old Harris PagePak VS that was used with a Western Electric 
Horizon system back in the dark ages with Asterisk

John Novack



--

Dog is my Co-Pilot
-- 
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
  https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] Paging systems?

2019-03-21 Thread Bryant Zimmerman 
Michael

Based on how I read the manual if you connect the TIP and RING of the ATA to 
the right pairs you should be able to send a call to the paging box. It looks 
that when the page call is picked up by the paging system you would then press 
a zone 1-9 or 0 for all.  The page would then bridge to the desired zone. the 
page would complete when the call is hung up. You would likely need to make 
sure the ATA is using current loop disconnect or reverse to ensure hang-up.

I think it should be the PABX config using the Figure 3 configuration.

Best of luck

Bryant Zimmerman

Sr. Systems Architect
Grand Dial Communications, A ZK Tech Inc. Company
616-299-5607 (mobile)
616-855-1030 Ext. 2003 (office)


From: Michael Munger 
Sent: 3/21/19 7:33 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion 
, John Novack 
Subject: Re: [asterisk-users] Paging systems?
Excellent point.

This is it: https://www.valcom.com/pdf/v-1109rthf.pdf

Get Outlook for Android

On Thu, Mar 21, 2019 at 7:22 PM -0400, "John Novack"   
wrote:

Michael Munger wrote:

Does anyone have an (overhead) paging system that they like that works with SIP?



We’ve got a client with an old paging system that (supposedly) just takes an 
rj11 POTS connection, but when we put an SPA Cisco adapter on it, it doesn’t 
auto-answer the call, so paging never happens.


Does it expect to see a POTS line with battery on it?
Then a Cisco or other ATA that would work to supply service to a POTS phone 
should work
OR:
Does it expect to see a POTS connection from a PBX trunk, and supply battery TO 
the trunk?
Then you would need a Cisco or other ATA with an FXO connection.

Both types of paging systems have been made and both styles of connections have 
existed through the last 30 + years, and since you haven't revealed the brand 
and model of paging system it makes troubleshooting difficult.
Using the existing system can be made to work
I use a very old Harris PagePak VS that was used with a Western Electric 
Horizon system back in the dark ages with Asterisk

John Novack

--  Dog is my Co-Pilot


-- 
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
  https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] Paging systems?

2019-03-21 Thread John Novack 

All you need then is a loop start trunk port. Any SIP ATA designed to connect 
to an ANALOG PSTN line.

The doc you sent doesn't show any rj11, so someone probably installed one to 
the first pair out of the 25 pair cable, blue/white

If you were to plug any old phone into that you should at least hear a live 
connection and dial tone from the box

You will need to send dtmf tones to the box for specific zones, or all call. That may be 
one reason you think but don't get an "auto answer" IF you are using an FXO ATA 
then it is sitting there waiting for some DTMF digits 1-9 for the zones, and zero for all 
call

This is also a "talk back" system. Does the customer expect to use the talk 
back feature?

You will need to put that into your dialplan

All easy to do in Asterisk

Similar but quite different than what I have. I announce incoming call numbers 
through the system, as well as quarterly time announcements through call files 
and a cron job. I use an FXO port off a channel bank, but an ATA with an FXO 
port should do the trick


Enjoy

John Novack

Michael Munger wrote:

Excellent point.

This is it: https://www.valcom.com/pdf/v-1109rthf.pdf

Get Outlook for Android 




On Thu, Mar 21, 2019 at 7:22 PM -0400, "John Novack" mailto:jnov...@comcast.net>> wrote:



Michael Munger wrote:


Does anyone have an (overhead) paging system that they like that works with 
SIP?

We’ve got a client with an old paging system that (supposedly) just takes 
an rj11 POTS connection, but when we put an SPA Cisco adapter on it, it doesn’t 
auto-answer the call, so paging never happens.



Does it expect to see a POTS line with battery on it?
Then a Cisco or other ATA that would work to supply service to a POTS phone 
should work
OR:
Does it expect to see a POTS connection from a PBX trunk, and supply 
battery TO the trunk?
Then you would need a Cisco or other ATA with an FXO connection.

Both types of paging systems have been made and both styles of connections 
have existed through the last 30 + years, and since you haven't revealed the 
brand and model of paging system it makes troubleshooting difficult.
Using the existing system can be made to work
I use a very old Harris PagePak VS that was used with a Western Electric 
Horizon system back in the dark ages with Asterisk

John Novack

-- 
Dog is my Co-Pilot






--
Dog is my Co-Pilot

-- 
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
  https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] Paging systems?

2019-03-21 Thread Michael Munger 
Excellent point.

This is it: https://www.valcom.com/pdf/v-1109rthf.pdf

Get Outlook for Android




On Thu, Mar 21, 2019 at 7:22 PM -0400, "John Novack" 
mailto:jnov...@comcast.net>> wrote:



Michael Munger wrote:
Does anyone have an (overhead) paging system that they like that works with SIP?

We’ve got a client with an old paging system that (supposedly) just takes an 
rj11 POTS connection, but when we put an SPA Cisco adapter on it, it doesn’t 
auto-answer the call, so paging never happens.

Does it expect to see a POTS line with battery on it?
Then a Cisco or other ATA that would work to supply service to a POTS phone 
should work
OR:
Does it expect to see a POTS connection from a PBX trunk, and supply battery TO 
the trunk?
Then you would need a Cisco or other ATA with an FXO connection.

Both types of paging systems have been made and both styles of connections have 
existed through the last 30 + years, and since you haven't revealed the brand 
and model of paging system it makes troubleshooting difficult.
Using the existing system can be made to work
I use a very old Harris PagePak VS that was used with a Western Electric 
Horizon system back in the dark ages with Asterisk

John Novack


--
Dog is my Co-Pilot
-- 
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
  https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] Paging systems?

2019-03-21 Thread Darryl Moore 
No. The SNOM PA1 are headless SIP clients which you configure in auto
answer and connect to an amplifier to drive PA speakers. The phones are
where you make the announcements from.

On Thu, Mar 21, 2019, 5:07 PM Antony Stone, <
antony.st...@asterisk.open.source.it> wrote:

> On Thursday 21 March 2019 at 21:59:51, Darryl Moore wrote:
>
> > For a paging system? No you don't. A number of SNOM PA1's and a few
> > grandstream phones and you're golden.
>
> Are you suggesting using standard telephones (presumably in auto-answer
> speakerphone mode) as paging devices?
>
> Depending on the environment, it can work very well (quiet office) or not
> at all
> (noisy workshop, large factory floor).
>
> > If you do need FXO or FXS, they are just as easy to setup as well, and
> there
> > are lots to choose from.
> >
> > On Thu, Mar 21, 2019, 4:45 PM Ryan, Travis, 
> wrote:
> > > You need more than an ATA. You need something with an FSO and FXO. I’ve
> > > used Linksys/SPA3102-3.3.6 and been happy with it.
> > >
> > > *From:* asterisk-users  *On
> > > Behalf Of *Sebastian Nielsen
> > > *Sent:* Thursday, March 21, 2019 3:01 PM
> > > *To:* 'Asterisk Users Mailing List - Non-Commercial Discussion' <
> > > asterisk-users@lists.digium.com>
> > > *Subject:* Re: [asterisk-users] Paging systems?
> > >
> > > How did the page system answer the call when it was used with the
> analog
> > > system?
> > >
> > > You could propably ”fake” those signals from inside asterisk, and cause
> > > it to answer.
> > >
> > > *Från:* asterisk-users  *För
> > > *Michael Munger
> > > *Skickat:* den 21 mars 2019 20:00
> > > *Till:* asterisk-users@lists.digium.com
> > > *Ämne:* [asterisk-users] Paging systems?
> > >
> > > Does anyone have an (overhead) paging system that they like that works
> > > with SIP?
> > >
> > > We’ve got a client with an old paging system that (supposedly) just
> takes
> > > an rj11 POTS connection, but when we put an SPA Cisco adapter on it, it
> > > doesn’t auto-answer the call, so paging never happens.
>
> I'm still intrigued to know how this really was plugged in and how it
> operated.
>
>
> Antony.
>
> --
> All generalisations are inaccurate.
>
>Please reply to the
> list;
>  please *don't* CC
> me.
>
> --
> _
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> Check out the new Asterisk community forum at:
> https://community.asterisk.org/
>
> New to Asterisk? Start here:
>   https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
  https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] Paging systems?

2019-03-21 Thread John Novack 



Michael Munger wrote:


Does anyone have an (overhead) paging system that they like that works with SIP?

We’ve got a client with an old paging system that (supposedly) just takes an 
rj11 POTS connection, but when we put an SPA Cisco adapter on it, it doesn’t 
auto-answer the call, so paging never happens.



Does it expect to see a POTS line with battery on it?
Then a Cisco or other ATA that would work to supply service to a POTS phone 
should work
OR:
Does it expect to see a POTS connection from a PBX trunk, and supply battery TO 
the trunk?
Then you would need a Cisco or other ATA with an FXO connection.

Both types of paging systems have been made and both styles of connections have 
existed through the last 30 + years, and since you haven't revealed the brand 
and model of paging system it makes troubleshooting difficult.
Using the existing system can be made to work
I use a very old Harris PagePak VS that was used with a Western Electric 
Horizon system back in the dark ages with Asterisk

John Novack

--
Dog is my Co-Pilot

-- 
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
  https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] Paging systems?

2019-03-21 Thread Bryant Zimmerman 
Michael

We use Bogan UTI1 box in conjunction with an ATA to patch to any overhead 
paging system. You patch the box directly into the amp line in for the 
overhead. When you call the extension it answers and puts the audio on the line 
to the PA.

If you only have a few speakers the UTI1 can even handle being the amp for a 
few speakers.

Bryant Zimmerman

Sr. Systems Architect
Grand Dial Communications, A ZK Tech Inc. Company
616-299-5607 (mobile)
616-855-1030 Ext. 2003 (office)


From: Darryl Moore 
Sent: 3/21/19 4:59 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion 

Subject: Re: [asterisk-users] Paging systems?
For a paging system? No you don't. A number of SNOM PA1's and a few grandstream 
phones and you're golden. If you do need FXO or FXS, they are just as easy to 
setup as well, and there are lots to choose from.

On Thu, Mar 21, 2019, 4:45 PM Ryan, Travis,  wrote:

You need more than an ATA. You need something with an FSO and FXO. I’ve used 
Linksys/SPA3102-3.3.6 and been happy with it.







From: asterisk-users  On Behalf Of 
Sebastian Nielsen
Sent: Thursday, March 21, 2019 3:01 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion' 

Subject: Re: [asterisk-users] Paging systems?



How did the page system answer the call when it was used with the analog system?

You could propably ”fake” those signals from inside asterisk, and cause it to 
answer.



Från: asterisk-users  För Michael 
Munger
Skickat: den 21 mars 2019 20:00
Till: asterisk-users@lists.digium.com
Ämne: [asterisk-users] Paging systems?



Does anyone have an (overhead) paging system that they like that works with SIP?



We’ve got a client with an old paging system that (supposedly) just takes an 
rj11 POTS connection, but when we put an SPA Cisco adapter on it, it doesn’t 
auto-answer the call, so paging never happens.





Michael J. Munger, dCAP, MCPS, MCNPS, MBSS

Microsoft Certified Professional

Microsoft Certified Small Business Specialist

Digium Certified Asterisk Professional

High Powered Help, Inc.

p:

678-905-8569

w:

hph.io  e: m...@hph.io





--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
  https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


-- 
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
  https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] Paging systems?

2019-03-21 Thread Sebastian Nielsen 
The thing is:

Does the paging system connect to a line (like it was a deskphone) or does
the paging system ACT as a line (that you connect a deskphone to)?

 

If the page system is technically a phone, the it should work with a SPA.
What you need to do then, is to figure out what the line does to get the
paging system to auto-answer.

The first thing you could do, is to connect a regular home-phone to the same
jack that the paging system were PREVIOUSLY connected, and then try ”paging”
it.

 

Then check the display. It could display a specific caller ID (that you need
to fake inside Asterisk) or it could send specific signals (which you hear
on the rings).

If you then send this ”fake” callerid from the asterisk to the SPA, it will
also send out this ”fake” callerid out to the paging system and cause it to
answer.

 

 

Or it could be the opposite, the paging system IS the line, and you
technically connect a line-out port to the paging system, ergo, the page
system acts like a phone company’s line in the wall.

Then you need something with a FXS port (something that acts like a phone).

 

 

 

Från: asterisk-users  För Michael
Munger
Skickat: den 21 mars 2019 21:05
Till: asterisk-users@lists.digium.com
Ämne: Re: [asterisk-users] Paging systems?

 

It worked on the old system.

I am open to suggestions, but don't want (or have the option) to add a TDM
card.

 





Michael Munger, dCAP, MCPS, MCNPS, MBSS


Microsoft Certified Professional


Microsoft Certified Small Business Specialist


Digium Certified Asterisk Professional


High Powered Help, Inc.


p:

678-905-8569


w:

 <https://hph.io> hph.io  e:  <mailto:m...@hph.io> m...@hph.io






On 3/21/19 3:01 PM, Sebastian Nielsen wrote:

How did the page system answer the call when it was used with the analog
system?

You could propably ”fake” those signals from inside asterisk, and cause it
to answer.

 

Från: asterisk-users  <mailto:asterisk-users-boun...@lists.digium.com>
 För Michael Munger
Skickat: den 21 mars 2019 20:00
Till: asterisk-users@lists.digium.com
<mailto:asterisk-users@lists.digium.com> 
Ämne: [asterisk-users] Paging systems?

 

Does anyone have an (overhead) paging system that they like that works with
SIP?

 

We’ve got a client with an old paging system that (supposedly) just takes an
rj11 POTS connection, but when we put an SPA Cisco adapter on it, it doesn’t
auto-answer the call, so paging never happens.

 

 





Michael J. Munger, dCAP, MCPS, MCNPS, MBSS


Microsoft Certified Professional


Microsoft Certified Small Business Specialist


Digium Certified Asterisk Professional


High Powered Help, Inc.


p:

678-905-8569


w:

 <https://hph.io> hph.io  e:  <mailto:m...@hph.io> m...@hph.io

 

 







smime.p7s
Description: S/MIME Cryptographic Signature
-- 
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
  https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] Paging systems?

2019-03-21 Thread Antony Stone 
On Thursday 21 March 2019 at 21:59:51, Darryl Moore wrote:

> For a paging system? No you don't. A number of SNOM PA1's and a few
> grandstream phones and you're golden.

Are you suggesting using standard telephones (presumably in auto-answer 
speakerphone mode) as paging devices?

Depending on the environment, it can work very well (quiet office) or not at 
all 
(noisy workshop, large factory floor).

> If you do need FXO or FXS, they are just as easy to setup as well, and there
> are lots to choose from.
> 
> On Thu, Mar 21, 2019, 4:45 PM Ryan, Travis,  wrote:
> > You need more than an ATA. You need something with an FSO and FXO. I’ve
> > used Linksys/SPA3102-3.3.6 and been happy with it.
> > 
> > *From:* asterisk-users  *On
> > Behalf Of *Sebastian Nielsen
> > *Sent:* Thursday, March 21, 2019 3:01 PM
> > *To:* 'Asterisk Users Mailing List - Non-Commercial Discussion' <
> > asterisk-users@lists.digium.com>
> > *Subject:* Re: [asterisk-users] Paging systems?
> > 
> > How did the page system answer the call when it was used with the analog
> > system?
> > 
> > You could propably ”fake” those signals from inside asterisk, and cause
> > it to answer.
> > 
> > *Från:* asterisk-users  *För
> > *Michael Munger
> > *Skickat:* den 21 mars 2019 20:00
> > *Till:* asterisk-users@lists.digium.com
> > *Ämne:* [asterisk-users] Paging systems?
> > 
> > Does anyone have an (overhead) paging system that they like that works
> > with SIP?
> > 
> > We’ve got a client with an old paging system that (supposedly) just takes
> > an rj11 POTS connection, but when we put an SPA Cisco adapter on it, it
> > doesn’t auto-answer the call, so paging never happens.

I'm still intrigued to know how this really was plugged in and how it 
operated.


Antony.

-- 
All generalisations are inaccurate.

   Please reply to the list;
 please *don't* CC me.

-- 
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
  https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] Paging systems?

2019-03-21 Thread Darryl Moore 
For a paging system? No you don't. A number of SNOM PA1's and a few
grandstream phones and you're golden. If you do need FXO or FXS, they are
just as easy to setup as well, and there are lots to choose from.

On Thu, Mar 21, 2019, 4:45 PM Ryan, Travis,  wrote:

> You need more than an ATA. You need something with an FSO and FXO. I’ve
> used Linksys/SPA3102-3.3.6 and been happy with it.
>
>
>
>
>
>
>
> *From:* asterisk-users  *On
> Behalf Of *Sebastian Nielsen
> *Sent:* Thursday, March 21, 2019 3:01 PM
> *To:* 'Asterisk Users Mailing List - Non-Commercial Discussion' <
> asterisk-users@lists.digium.com>
> *Subject:* Re: [asterisk-users] Paging systems?
>
>
>
> How did the page system answer the call when it was used with the analog
> system?
>
> You could propably ”fake” those signals from inside asterisk, and cause it
> to answer.
>
>
>
> *Från:* asterisk-users  *För *Michael
> Munger
> *Skickat:* den 21 mars 2019 20:00
> *Till:* asterisk-users@lists.digium.com
> *Ämne:* [asterisk-users] Paging systems?
>
>
>
> Does anyone have an (overhead) paging system that they like that works
> with SIP?
>
>
>
> We’ve got a client with an old paging system that (supposedly) just takes
> an rj11 POTS connection, but when we put an SPA Cisco adapter on it, it
> doesn’t auto-answer the call, so paging never happens.
>
>
>
>
>
> Michael J. Munger, dCAP, MCPS, MCNPS, MBSS
>
> *Microsoft Certified Professional*
>
> *Microsoft Certified Small Business Specialist*
>
> *Digium Certified Asterisk Professional*
>
> *High Powered Help, Inc.*
>
> p:
>
> 678-905-8569
>
> w:
>
> hph.io  e: m...@hph.io
>
>
>
>
> --
> _
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> Check out the new Asterisk community forum at:
> https://community.asterisk.org/
>
> New to Asterisk? Start here:
>   https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
  https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] Paging systems?

2019-03-21 Thread Ryan, Travis 
You need more than an ATA. You need something with an FSO and FXO. I've used 
Linksys/SPA3102-3.3.6 and been happy with it.



From: asterisk-users  On Behalf Of 
Sebastian Nielsen
Sent: Thursday, March 21, 2019 3:01 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion' 

Subject: Re: [asterisk-users] Paging systems?

How did the page system answer the call when it was used with the analog system?
You could propably "fake" those signals from inside asterisk, and cause it to 
answer.

Från: asterisk-users 
mailto:asterisk-users-boun...@lists.digium.com>>
 För Michael Munger
Skickat: den 21 mars 2019 20:00
Till: asterisk-users@lists.digium.com<mailto:asterisk-users@lists.digium.com>
Ämne: [asterisk-users] Paging systems?

Does anyone have an (overhead) paging system that they like that works with SIP?

We've got a client with an old paging system that (supposedly) just takes an 
rj11 POTS connection, but when we put an SPA Cisco adapter on it, it doesn't 
auto-answer the call, so paging never happens.


[cid:image001.png@01D4E005.74B786F0]

Michael J. Munger, dCAP, MCPS, MCNPS, MBSS

Microsoft Certified Professional

Microsoft Certified Small Business Specialist

Digium Certified Asterisk Professional

High Powered Help, Inc.

p:

678-905-8569

w:

hph.io<https://hph.io>  e: m...@hph.io<mailto:m...@hph.io>




-- 
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
  https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] Paging systems?

2019-03-21 Thread Darryl Moore 
I've used SNOM PA1 before with good success.

On Thu, Mar 21, 2019, 2:59 PM Michael Munger,  wrote:

> Does anyone have an (overhead) paging system that they like that works
> with SIP?
>
>
>
> We’ve got a client with an old paging system that (supposedly) just takes
> an rj11 POTS connection, but when we put an SPA Cisco adapter on it, it
> doesn’t auto-answer the call, so paging never happens.
>
>
>
>
>
> Michael J. Munger, dCAP, MCPS, MCNPS, MBSS
>
> *Microsoft Certified Professional*
>
> *Microsoft Certified Small Business Specialist*
>
> *Digium Certified Asterisk Professional*
>
> *High Powered Help, Inc.*
>
> p:
>
> 678-905-8569
>
> w:
>
> hph.io  e: m...@hph.io
>
>
>
>
> --
> _
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> Check out the new Asterisk community forum at:
> https://community.asterisk.org/
>
> New to Asterisk? Start here:
>   https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
  https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] Paging systems?

2019-03-21 Thread Eric Wieling 
These seem to work well: 
http://www.vikingelectronics.com/product_docs/product_manuals/VE__PA-15__15_Watt_Paging_Amplifier_with_Background_Music_and_Loud_Ringing_486.pdf



On 03/21/2019 02:53 PM, Michael Munger wrote:
Does anyone have an (overhead) paging system that they like that works 
with SIP?


We’ve got a client with an old paging system that (supposedly) just 
takes an rj11 POTS connection, but when we put an SPA Cisco adapter on 
it, it doesn’t auto-answer the call, so paging never happens.




Michael J. Munger, dCAP, MCPS, MCNPS, MBSS

*Microsoft Certified Professional*

*Microsoft Certified Small Business Specialist*

*Digium Certified Asterisk Professional*

*High Powered Help, Inc.*

p:



678-905-8569

w:



hph.io e: m...@hph.io 





--
http://help.nyigc.net/

--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
 https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] Paging systems?

2019-03-21 Thread Nabeel Jafferali 
I've had good experience with Algo's VoIP paging solutions.

--
Nabeel Jafferali


On Thu, Mar 21, 2019 at 3:00 PM Michael Munger  wrote:

> Does anyone have an (overhead) paging system that they like that works
> with SIP?
>
>
>
> We’ve got a client with an old paging system that (supposedly) just takes
> an rj11 POTS connection, but when we put an SPA Cisco adapter on it, it
> doesn’t auto-answer the call, so paging never happens.
>
>
>
>
>
> Michael J. Munger, dCAP, MCPS, MCNPS, MBSS
>
> *Microsoft Certified Professional*
>
> *Microsoft Certified Small Business Specialist*
>
> *Digium Certified Asterisk Professional*
>
> *High Powered Help, Inc.*
>
> p:
>
> 678-905-8569
>
> w:
>
> hph.io  e: m...@hph.io
>
>
>
>
> --
> _
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> Check out the new Asterisk community forum at:
> https://community.asterisk.org/
>
> New to Asterisk? Start here:
>   https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
  https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] Paging systems?

2019-03-21 Thread Doug Lytle 
>>> Does anyone have an (overhead) paging system that they like that works with 
>>> SIP?

Our old phone system back ends into a Bogen AMP.

I'm in the process of replacing that system (Meridian) with Asterisk and found 
that the snom PA1 works very well.  If an AMP is involved, this might work.

http://wiki.snom.com/File:Snom_pa1.png

Doug
-- 
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
  https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] Paging systems?

2019-03-21 Thread Michael Munger 
It worked on the old system.

I am open to suggestions, but don't want (or have the option) to add a
TDM card.



Michael Munger, dCAP, MCPS, MCNPS, MBSS
*Microsoft Certified Professional*
*Microsoft Certified Small Business Specialist*
*Digium Certified Asterisk Professional*
*High Powered Help, Inc.*
p:  678-905-8569
w:  hph.io <https://hph.io>  e: m...@hph.io <mailto:m...@hph.io>



On 3/21/19 3:01 PM, Sebastian Nielsen wrote:
>
> How did the page system answer the call when it was used with the
> analog system?
>
> You could propably ”fake” those signals from inside asterisk, and
> cause it to answer.
>
>  
>
> *Från:* asterisk-users  *För
> *Michael Munger
> *Skickat:* den 21 mars 2019 20:00
> *Till:* asterisk-users@lists.digium.com
> *Ämne:* [asterisk-users] Paging systems?
>
>  
>
> Does anyone have an (overhead) paging system that they like that works
> with SIP?
>
>  
>
> We’ve got a client with an old paging system that (supposedly) just
> takes an rj11 POTS connection, but when we put an SPA Cisco adapter on
> it, it doesn’t auto-answer the call, so paging never happens.
>
>  
>
>  
>
>   
>
> Michael J. Munger, dCAP, MCPS, MCNPS, MBSS
>
> *Microsoft Certified Professional*
>
> *Microsoft Certified Small Business Specialist*
>
> *Digium Certified Asterisk Professional*
>
> *High Powered Help, Inc.*
>
> p:
>
>   
>
> 678-905-8569
>
> w:
>
>   
>
> hph.io <https://hph.io>  e: m...@hph.io <mailto:m...@hph.io>
>
>  
>
>  
>
>


pEpkey.asc
Description: application/pgp-keys
-- 
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
  https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] Paging systems?

2019-03-21 Thread Sebastian Nielsen 
How did the page system answer the call when it was used with the analog
system?

You could propably ”fake” those signals from inside asterisk, and cause it
to answer.

 

Från: asterisk-users  För Michael
Munger
Skickat: den 21 mars 2019 20:00
Till: asterisk-users@lists.digium.com
Ämne: [asterisk-users] Paging systems?

 

Does anyone have an (overhead) paging system that they like that works with
SIP?

 

We’ve got a client with an old paging system that (supposedly) just takes an
rj11 POTS connection, but when we put an SPA Cisco adapter on it, it doesn’t
auto-answer the call, so paging never happens.

 

 





Michael J. Munger, dCAP, MCPS, MCNPS, MBSS


Microsoft Certified Professional


Microsoft Certified Small Business Specialist


Digium Certified Asterisk Professional


High Powered Help, Inc.


p:

678-905-8569


w:

 <https://hph.io> hph.io  e:  <mailto:m...@hph.io> m...@hph.io

 

 



smime.p7s
Description: S/MIME Cryptographic Signature
-- 
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
  https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

[asterisk-users] Paging systems?

2019-03-21 Thread Michael Munger 
Does anyone have an (overhead) paging system that they like that works with SIP?

We've got a client with an old paging system that (supposedly) just takes an 
rj11 POTS connection, but when we put an SPA Cisco adapter on it, it doesn't 
auto-answer the call, so paging never happens.


[cid:image001.png@01D4DFF6.9C1F1AA0]

Michael J. Munger, dCAP, MCPS, MCNPS, MBSS

Microsoft Certified Professional

Microsoft Certified Small Business Specialist

Digium Certified Asterisk Professional

High Powered Help, Inc.

p:

678-905-8569

w:

hph.io  e: m...@hph.io




-- 
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
  https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [Asterisk-Users] Paging systems from the phone...

2005-08-03 Thread C F 
Yeah you should read the wiki, located at:
http://www.voip-info.org/wiki-asterisk
or you can try searching the archives, do a google search like this:
astersik paging site:lists.digium.com
or:
asterisk paging site:voip-info.org


On 8/2/05, Francois Meehan [EMAIL PROTECTED] wrote:
 Hi all,
 
 Is there a model of IP phone, with a built-in speaker, that can be used as
 part of a Overhead Paging system? Can Asterisk accomodate such a feature?
 
 Regards,
 
 Francois
 
 
 Random Thought:
 ---
 It isn't necessary to have relatives in Kansas City in order to be
 unhappy.
 -- Groucho Marx
 ___
 Asterisk-Users mailing list
 Asterisk-Users@lists.digium.com
 http://lists.digium.com/mailman/listinfo/asterisk-users
 To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

[Asterisk-Users] Paging systems from the phone...

2005-08-02 Thread Francois Meehan 
Hi all,

Is there a model of IP phone, with a built-in speaker, that can be used as
part of a Overhead Paging system? Can Asterisk accomodate such a feature?

Regards,

Francois


Random Thought:
---
It isn't necessary to have relatives in Kansas City in order to be
unhappy.
-- Groucho Marx
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users