Re: [asterisk-users] Problem with FXS ports of TDM400P
Hi Gustavo - I just received two TDM400P cards, but I'm having problems with them. On a x86 stable Gentoo box. Kernel: 2.6.17 gcc-4.1.1, glibc-2.4-r4 Is that an hardware problem? Should I try the other card? I tried the other card and the problem is still there. REALY NEED HELP What is your hardware? The TDM400 cards require PCI 2.2 compliant hardware. If you run them with PCI 2.1 or earlier hardware yhou are liable to run into issues. - Noah ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Problem with FXS ports of TDM400P
I just received two TDM400P cards, but I'm having problems with them. The full info is at: http://pastebin.com/824079 Extra, I'm using : libpri-1.2.3 zaptel-1.2.10 On a x86 stable Gentoo box. Kernel: 2.6.17 gcc-4.1.1, glibc-2.4-r4 Is that an hardware problem? Should I try the other card? -- Gustavo Felisberto (HumpBack) Web: http://dev.gentoo.org/~humpback Blog: http://blog.felisberto.net/ It's most certainly GNU/Linux, not Linux. Read more at http://www.gnu.org/gnu/why-gnu-linux.html . - signature.asc Description: OpenPGP digital signature ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Problem with FXS ports of TDM400P
Gustavo Felisberto wrote: I just received two TDM400P cards, but I'm having problems with them. The full info is at: http://pastebin.com/824079 Extra, I'm using : libpri-1.2.3 zaptel-1.2.10 On a x86 stable Gentoo box. Kernel: 2.6.17 gcc-4.1.1, glibc-2.4-r4 Is that an hardware problem? Should I try the other card? I tried the other card and the problem is still there. REALY NEED HELP -- Gustavo Felisberto (HumpBack) Web: http://dev.gentoo.org/~humpback Blog: http://blog.felisberto.net/ It's most certainly GNU/Linux, not Linux. Read more at http://www.gnu.org/gnu/why-gnu-linux.html . - signature.asc Description: OpenPGP digital signature ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Problem with FXS ports of TDM400P
Roger Gulbranson wrote: On Tue, 2006-11-14 at 17:07 -0500, Roger Gulbranson wrote: On Tue, 2006-11-14 at 21:42 +, Gustavo Felisberto wrote: Gustavo Felisberto wrote: I just received two TDM400P cards, but I'm having problems with them. The full info is at: http://pastebin.com/824079 Extra, I'm using : libpri-1.2.3 zaptel-1.2.10 On a x86 stable Gentoo box. Kernel: 2.6.17 gcc-4.1.1, glibc-2.4-r4 Is that an hardware problem? Should I try the other card? I tried the other card and the problem is still there. REALY NEED HELP What happens if you add: fxoks=1,2 into /etc/zaptel.conf? Also, what does: ztcfg -vv tell you? ztcfg -vv Zaptel Configuration == Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Slaves: 04) 4 channels configured. But if i try to use the channel 3 and 4 in zapata.conf all works ok. If i add the 1 and 2 channel I get: == Parsing '/etc/asterisk/zapata.conf': Found -- Registered channel 3, FXS Kewlstart signalling Nov 14 22:38:56 WARNING[5751]: chan_zap.c:1097 zt_open: Unable to specify channel 1: No such device Nov 14 22:38:56 ERROR[5751]: chan_zap.c:7237 mkintf: Unable to open channel 1: No such device here = 0, tmp-channel = 1, channel = 1 Nov 14 22:38:56 ERROR[5751]: chan_zap.c:12000 setup_zap: Unable to register channel '1' Nov 14 22:38:56 WARNING[5751]: loader.c:414 __load_resource: chan_zap.so: load_module failed, returning -1 -- Unregistered channel 1 Nov 14 22:38:56 WARNING[5751]: loader.c:554 load_modules: Loading module chan_zap.so failed! -- Gustavo Felisberto (HumpBack) Web: http://dev.gentoo.org/~humpback Blog: http://blog.felisberto.net/ It's most certainly GNU/Linux, not Linux. Read more at http://www.gnu.org/gnu/why-gnu-linux.html . - signature.asc Description: OpenPGP digital signature ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] Problem with FXS ports of TDM400P
Hi, I've not yet used a TDM400, only a 2400. Silly question first, are you connecting the power cable? I don't know what happens if you leave it off. I found that if I have the zaptel asterisk services enabled, the card/drivers do not initialise correctly. To get my system working, I ended up with the services stopped. I added lines in rc.local to remove (rmmod) the card driver zaptel modules, then start zaptel, a delay while other things are started, then start asterisk. I'm running Centos 4.4 so the exact commands may be different - eg. I use 'service zaptel start' to start zaptel, which then loads all the appropriate modules. This sequence seems to give an absolutely reliable startup (so far...) The other minor problem I had was getting the settings mixed up in /etc/zaptel.conf I initially missed the bit of the docs that said to use fxsks for the FXO modules connected to outside lines use fxoks for the FXS modules on local extensions. Hope this is some help, Robert Jenkins. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gustavo Felisberto Sent: 14 November 2006 21:43 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Problem with FXS ports of TDM400P Gustavo Felisberto wrote: I just received two TDM400P cards, but I'm having problems with them. The full info is at: http://pastebin.com/824079 Extra, I'm using : libpri-1.2.3 zaptel-1.2.10 On a x86 stable Gentoo box. Kernel: 2.6.17 gcc-4.1.1, glibc-2.4-r4 Is that an hardware problem? Should I try the other card? I tried the other card and the problem is still there. REALY NEED HELP -- Gustavo Felisberto (HumpBack) Web: http://dev.gentoo.org/~humpback Blog: http://blog.felisberto.net/ It's most certainly GNU/Linux, not Linux. Read more at http://www.gnu.org/gnu/why-gnu-linux.html . - ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Problem with FXS ports of TDM400P
Was the phone off hook when the card was started ? Also as some one mentioned above is there power being provided to the card ? Hi, I've not yet used a TDM400, only a 2400. Silly question first, are you connecting the power cable? I don't know what happens if you leave it off. I found that if I have the zaptel asterisk services enabled, the card/drivers do not initialise correctly. To get my system working, I ended up with the services stopped. I added lines in rc.local to remove (rmmod) the card driver zaptel modules, then start zaptel, a delay while other things are started, then start asterisk. I'm running Centos 4.4 so the exact commands may be different - eg. I use 'service zaptel start' to start zaptel, which then loads all the appropriate modules. This sequence seems to give an absolutely reliable startup (so far...) The other minor problem I had was getting the settings mixed up in /etc/zaptel.conf I initially missed the bit of the docs that said to use fxsks for the FXO modules connected to outside lines use fxoks for the FXS modules on local extensions. Hope this is some help, Robert Jenkins. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gustavo Felisberto Sent: 14 November 2006 21:43 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Problem with FXS ports of TDM400P Gustavo Felisberto wrote: I just received two TDM400P cards, but I'm having problems with them. The full info is at: http://pastebin.com/824079 Extra, I'm using : libpri-1.2.3 zaptel-1.2.10 On a x86 stable Gentoo box. Kernel: 2.6.17 gcc-4.1.1, glibc-2.4-r4 Is that an hardware problem? Should I try the other card? I tried the other card and the problem is still there. REALY NEED HELP ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Problem with FXS ports of TDM400P
Dovid B wrote: Was the phone off hook when the card was started ? Also as some one mentioned above is there power being provided to the card ? Thre was no phone connected to the card when the module was loaded. Is that needed? The card has the power connector plugged in. -- Gustavo Felisberto (HumpBack) Web: http://dev.gentoo.org/~humpback Blog: http://blog.felisberto.net/ It's most certainly GNU/Linux, not Linux. Read more at http://www.gnu.org/gnu/why-gnu-linux.html . - signature.asc Description: OpenPGP digital signature ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
