Quoting James Lamanna :
> I would call KPN Telecom and ask them for help as well.
> They will have much more sophisticated tools for debugging PRIs and also will
> be able to check on their end if they see the D-Channel as up.
After studying the configuration more closely, the first thing I
cha
On Thu, Apr 1, 2010 at 6:15 AM, Jaap Winius wrote:
[snip]
>
> Besides the above error, I also noticed this:
>
> CLI> pri show span 1
> Primary D-channel: 16
> Status: Provisioned, Down, Active
> Switchtype: EuroISDN
> Type: CPE
> Window Length: 0/7
> Sentrej: 0
> Solicit
what about
cat /proc/zaptel/*
HTH,
Ioan.
On Fri, Apr 2, 2010 at 2:46 PM, Jaap Winius wrote:
> # asterisk -rx 'pri show spans'
> PRI span 1/0: Provisioned, Down, Active
--
_
-- Bandwidth and Colocation Provided by http://www.
Quoting RESEARCH :
> Can you post outputs for the following commands;
>
> #asterisk -rx 'pri show spans'
> #asterisk -rx 'zap show channels'
> #wanpipemon -i w1g1 -c Ta
Sure thing! Here they are in succession:
==
# asterisk -rx 'pri show s
ehalf Of Jaap Winius
Sent: Thursday, April 01, 2010 4:15 PM
To: Asterisk
Subject: [asterisk-users] Problem with Sangoma A104 and euroisdn pri
Hi all,
My problem boils down to these errors:
... Unable to create channel of type 'ZAP' (cause 34 -
Circuit/channel congestion)
==
Hi all,
My problem boils down to these errors:
... Unable to create channel of type 'ZAP' (cause 34 -
Circuit/channel congestion)
== Everyone is busy/congested at this time
This is triggered by lines in extentions.conf such as:
exten => _X.,1,Dial(ZAP/g1/${EXTEN},,W)
The sy
