Re: [asterisk-users] Re: PRI: sometimes Asterisk drop calls
Hi, you are right. We have an outbound calls problem too. We tried not to use groups but to ask Asterisk for an available channel using chanisavail command. Asterisk gives us back the channel but when we try to call using that channel Asterisk says the channel is not availableand nobody is using it Seems strange nobody noticed it before. This risks to be a dangerous problem because this means Asterisk does not know which channels are really available and which are not. In other words if nobody explains why Asterisk behaves that way, it surely be possible to consider this as a bug. Is there anybody trying to use chanisavail with success?? TIA Giorgio Incantalupo Tomislav Parčina wrote: In article [EMAIL PROTECTED], [EMAIL PROTECTED] says... Hi, I do not use queues but I have a lot of messages like that. I talked a lot with Steve about this It seems like Asterisk cannot agree with telco about which channels are busy and which are not. Maybe a bug? I do not know...it seems too strange Asterisk has a so big problem. There must be something we do not knowBy the way, the solution seems to be using the higher channels of the span, in other words to make calls using G instead of g inside Dial command (thans to Steve and others!!) I don't think that could be the problem. Because Asterisk has already established connection with provider on certain channel. So why would they negotiate another channel? When I transfer phone call to another extension, incoming channel doesn't change. I think something else is the problem, but I do encourage to use G in dialplan's Dial command. -- Tomislav Parčina Lama Computers Split Stinice 12, 21000 Split Tel.: +385(21)495148 Mob.: +385(91)1212148 SIP: [EMAIL PROTECTED] e-mail: tparcina#lama.hr http://www.lama.hr ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Re: PRI: sometimes Asterisk drop calls
Hi, I do not use queues but I have a lot of messages like that. I talked a lot with Steve about this It seems like Asterisk cannot agree with telco about which channels are busy and which are not. Maybe a bug? I do not know...it seems too strange Asterisk has a so big problem. There must be something we do not knowBy the way, the solution seems to be using the higher channels of the span, in other words to make calls using G instead of g inside Dial command (thans to Steve and others!!) Hope may help! Giorgio Incantalupo Tomislav Parčina wrote: In article [EMAIL PROTECTED], [EMAIL PROTECTED] says... Do you have queues/agents configured? No, I don't have queues nor agents configured. -- Tomislav Parčina Lama Computers Split Stinice 12, 21000 Split Tel.: +385(21)495148 Mob.: +385(91)1212148 SIP: [EMAIL PROTECTED] e-mail: tparcina#lama.hr http://www.lama.hr ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Re: PRI: sometimes Asterisk drop calls
In article [EMAIL PROTECTED], [EMAIL PROTECTED] says... Hi, I do not use queues but I have a lot of messages like that. I talked a lot with Steve about this It seems like Asterisk cannot agree with telco about which channels are busy and which are not. Maybe a bug? I do not know...it seems too strange Asterisk has a so big problem. There must be something we do not knowBy the way, the solution seems to be using the higher channels of the span, in other words to make calls using G instead of g inside Dial command (thans to Steve and others!!) I don't think that could be the problem. Because Asterisk has already established connection with provider on certain channel. So why would they negotiate another channel? When I transfer phone call to another extension, incoming channel doesn't change. I think something else is the problem, but I do encourage to use G in dialplan's Dial command. -- Tomislav Parčina Lama Computers Split Stinice 12, 21000 Split Tel.: +385(21)495148 Mob.: +385(91)1212148 SIP: [EMAIL PROTECTED] e-mail: tparcina#lama.hr http://www.lama.hr ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Re: PRI: sometimes Asterisk drop calls
In article [EMAIL PROTECTED], [EMAIL PROTECTED] says... Do you have queues/agents configured? No, I don't have queues nor agents configured. -- Tomislav Parčina Lama Computers Split Stinice 12, 21000 Split Tel.: +385(21)495148 Mob.: +385(91)1212148 SIP: [EMAIL PROTECTED] e-mail: tparcina#lama.hr http://www.lama.hr ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Re: PRI: sometimes Asterisk drop calls
In article [EMAIL PROTECTED], [EMAIL PROTECTED] says... To start the ball rolling: Software: Zaptel 1.0.9, Asterisk 1.0.9, BRIstuff-0.2.0, wanpipe-2.3.2 PRI interface: Sangoma A101U (UK E1) Phones on sites with NO problems: snom, elmeg, Aastra, Linksys/Sipura Phones on problem site: Hitachi WIP3000, Zyxel F1000 (?) Hi Steve! I have same errors on one *. Here are basic information's: Sep 5 15:06:53 WARNING[2223] chan_zap.c: Ring requested on channel 0/2 already in use on span 1. Hanging up owner. Sep 7 12:56:10 WARNING[2224] chan_zap.c: Ring requested on channel 0/1 already in use on span 2. Hanging up owner. Software: asterisk-1.2.10; libpri-1.2.3; zaptel-1.2.7 PRI interface: Digium Te205P (HR T-com E1) Phones: No phones - connected to Ericsson E250 BP -- Tomislav Parčina Lama Computers Split Stinice 12, 21000 Split Tel.: +385(21)495148 Mob.: +385(91)1212148 SIP: [EMAIL PROTECTED] e-mail: tparcina#lama.hr http://www.lama.hr ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Re: PRI: sometimes Asterisk drop calls
Do you have queues/agents configured? Tomislav Parčina wrote: In article [EMAIL PROTECTED], [EMAIL PROTECTED] says... To start the ball rolling: Software: Zaptel 1.0.9, Asterisk 1.0.9, BRIstuff-0.2.0, wanpipe-2.3.2 PRI interface: Sangoma A101U (UK E1) Phones on sites with NO problems: snom, elmeg, Aastra, Linksys/Sipura Phones on problem site: Hitachi WIP3000, Zyxel F1000 (?) Hi Steve! I have same errors on one *. Here are basic information's: Sep 5 15:06:53 WARNING[2223] chan_zap.c: Ring requested on channel 0/2 already in use on span 1. Hanging up owner. Sep 7 12:56:10 WARNING[2224] chan_zap.c: Ring requested on channel 0/1 already in use on span 2. Hanging up owner. Software: asterisk-1.2.10; libpri-1.2.3; zaptel-1.2.7 PRI interface: Digium Te205P (HR T-com E1) Phones: No phones - connected to Ericsson E250 BP -- Tomislav Parčina Lama Computers Split Stinice 12, 21000 Split Tel.: +385(21)495148 Mob.: +385(91)1212148 SIP: [EMAIL PROTECTED] e-mail: tparcina#lama.hr http://www.lama.hr ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Michael Welter Telecom Matters Corp. Denver, Colorado US +1.303.414.4980 [EMAIL PROTECTED] www.TelecomMatters.net ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Re: PRI: sometimes Asterisk drop calls
One of my clients is saying that this happens after a queue agent performs an attended transfer. Has anyone else seen this? Tomislav Parčina wrote: In article [EMAIL PROTECTED], [EMAIL PROTECTED] says... To start the ball rolling: Software: Zaptel 1.0.9, Asterisk 1.0.9, BRIstuff-0.2.0, wanpipe-2.3.2 PRI interface: Sangoma A101U (UK E1) Phones on sites with NO problems: snom, elmeg, Aastra, Linksys/Sipura Phones on problem site: Hitachi WIP3000, Zyxel F1000 (?) Hi Steve! I have same errors on one *. Here are basic information's: Sep 5 15:06:53 WARNING[2223] chan_zap.c: Ring requested on channel 0/2 already in use on span 1. Hanging up owner. Sep 7 12:56:10 WARNING[2224] chan_zap.c: Ring requested on channel 0/1 already in use on span 2. Hanging up owner. Software: asterisk-1.2.10; libpri-1.2.3; zaptel-1.2.7 PRI interface: Digium Te205P (HR T-com E1) Phones: No phones - connected to Ericsson E250 BP -- Tomislav Parčina Lama Computers Split Stinice 12, 21000 Split Tel.: +385(21)495148 Mob.: +385(91)1212148 SIP: [EMAIL PROTECTED] e-mail: tparcina#lama.hr http://www.lama.hr ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Michael Welter Telecom Matters Corp. Denver, Colorado US +1.303.414.4980 [EMAIL PROTECTED] www.TelecomMatters.net ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Re: PRI: sometimes Asterisk drop calls
On 9/13/06, Michael Welter [EMAIL PROTECTED] wrote: Tomislav Parčina wrote: In article [EMAIL PROTECTED], [EMAIL PROTECTED] says... To start the ball rolling: Software: Zaptel 1.0.9, Asterisk 1.0.9, BRIstuff-0.2.0, wanpipe-2.3.2 PRI interface: Sangoma A101U (UK E1) Phones on sites with NO problems: snom, elmeg, Aastra, Linksys/Sipura Phones on problem site: Hitachi WIP3000, Zyxel F1000 (?) Hi Steve! I have same errors on one *. Here are basic information's: Sep 5 15:06:53 WARNING[2223] chan_zap.c: Ring requested on channel 0/2 already in use on span 1. Hanging up owner. Sep 7 12:56:10 WARNING[2224] chan_zap.c: Ring requested on channel 0/1 already in use on span 2. Hanging up owner. Software: asterisk-1.2.10; libpri-1.2.3; zaptel-1.2.7 PRI interface: Digium Te205P (HR T-com E1) Phones: No phones - connected to Ericsson E250 BP One of my clients is saying that this happens after a queue agent performs an attended transfer. Has anyone else seen this? None of our systems use queues or agents, including the problem site, but the problem site does make very heavy use of attended transfers. Regards, Steve ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
