, November 12, 2009 6:45 PM
Subject: Re: [asterisk-users] Termination Question
That could work, but I have no control over server B, not server C !
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Karl Fife
Sent: Friday, November 13
, November 12, 2009 6:45 PM
Subject: Re: [asterisk-users] Termination Question
That could work, but I have no control over server B, not server C !
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Karl Fife
Sent: Friday, November 13
Hello,
I would like to know how the following scenario works:
I have 3 Asterisk servers, A,B C, each one is located in a different
country.
Asterisk A is the main one, and both B C are connected to it.
My question is, when a call is originated from B to C, it will have to go
through
To: asterisk-users@lists.digium.com
Date: Thu, 12 Nov 2009 16:13:10 +0300
Subject: [asterisk-users] Termination Question
Hello,
I would like to know how the following scenario works:
I have 3 Asterisk servers, A,B C, each one is
located in a different country.
Asterisk A is the main
- Original Message -
From: Tarek Sawah
To: Asterisk Users
Sent: Thursday, November 12, 2009 8:28 AM
Subject: Re: [asterisk-users] Termination Question
for the sake of bandwidth you are supposed to connect each two servers
together.. otherwise calls between B C will have to go through
List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Termination Question
...and with a packet switched transport layer, the 'hairpin' route through A
may create problematic levels of latency--latency that would perhaps NOT
have been problematic on a classic circuit switched route, so
using
IAX2 over SIP.
-K
- Original Message -
From: B.Masoud @ SH
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Sent: Thursday, November 12, 2009 6:10 PM
Subject: Re: [asterisk-users] Termination Question
So how can I let A makes a PEER connection between B
: Re: [asterisk-users] Termination Question
I have no first-hand experience with the fussy idiosyncrasies, but the BIG
PICTURE is to have server A set up the call, and then reinvite the media
directly from B to C. The call control messages flow to server A, the media
goes directly. If you