Re: [asterisk-users] Zaptel problem with pots lines
Hi Enrico, have you tried with busydetect=yes? It (sometimes) worked for me with Asterisk 1.2. Giorgio Enrico Maistro wrote: Hi, I'm trying to get up and running a TDM400 with a standard italian pots line but i'm having problems at getting asterisk to detect when the line get answered on outgoing calls. I'm using asterisk 1.6 beta 9 with zaptel 1.4.11. I tried with and without answeronpolarityswitch=yes but it didn't change anything at all. With callprogress=yes answer get never detected. With callprogress=no line get answered as soon as it start ringing, regardless if someone really answer the call. Zaptel channels use fxs_ks signalling . Loading wctdm module with debug=1 result in: kernel: Freshmaker version: 73 kernel: Freshmaker passed register test kernel: ProSLIC on module 0, product 3, version 15 kernel: VoiceDAA System: 04 kernel: ISO-Cap is now up, line side: 03 rev 06 kernel: setting FXO tx gain for card=0 to 0 kernel: setting FXO rx gain for card=0 to 0 kernel: DEBUG fxotxgain:0.0 fxorxgain:0.0 kernel: Module 0: Installed -- AUTO FXO (FCC mode) kernel: ProSLIC on module 1, product 0, version 0 kernel: VoiceDAA System: 04 kernel: ISO-Cap is now up, line side: 03 rev 06 kernel: setting FXO tx gain for card=1 to 0 kernel: setting FXO rx gain for card=1 to 0 kernel: DEBUG fxotxgain:0.0 fxorxgain:0.0 kernel: Module 1: Installed -- AUTO FXO (FCC mode) kernel: ProSLIC on module 2, product 0, version 0 kernel: Module 2: Not installed kernel: ProSLIC on module 3, product 0, version 0 kernel: Module 3: Not installed kernel: Found a Wildcard TDM: Wildcard TDM400P REV I (2 modules) kernel: 4294908325 Polarity reversed (0 - -1) kernel: 4294908326 Polarity reversed (0 - 1) kernel: BATTERY on 1/1 (-)! kernel: NO BATTERY on 1/2! Any suggestion? Am i trying to do something that simply can't be done? Thanks, Enrico Maistro ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ Giorgio Incantalupo, mailto:[EMAIL PROTECTED] FGA srl - http://www.fgasoftware.com - [EMAIL PROTECTED] - The Agile PBX http://www.voiceatwork.eu Tel: 02997663.14, Fax: 0291390172 ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Zaptel problem with pots lines
Hi Enrico. In Italy the polarity reversal is never used. I'm using the TDM400 with an FXO port in Italy with the config reported below and is working properly in any situations: --- zaptel.conf --- fxsks=1 loadzone=it defaultzone=it --- zapata.conf --- [channels] language=en context=from-tdm-fxo signalling=fxs_ks threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes busydetect=yes busycount=6 usecallerid=yes callerid=asreceived echocancel=yes echocancelwhenbridged=no relaxdtmf=yes rxgain=3.0 txgain=0.0 amaflags=billing group=1 callgroup=1 pickupgroup=1 jbenable=yes faxdetect=no channel = 1 I'm using zaptel-1.4.6 and asterisk-1.4.20.1. I hope this could help you. Best regards, Marco Signorini. Enrico Maistro wrote: Hi, I'm trying to get up and running a TDM400 with a standard italian pots line but i'm having problems at getting asterisk to detect when the line get answered on outgoing calls. I'm using asterisk 1.6 beta 9 with zaptel 1.4.11. I tried with and without answeronpolarityswitch=yes but it didn't change anything at all. With callprogress=yes answer get never detected. With callprogress=no line get answered as soon as it start ringing, regardless if someone really answer the call. Zaptel channels use fxs_ks signalling . Loading wctdm module with debug=1 result in: kernel: Freshmaker version: 73 kernel: Freshmaker passed register test kernel: ProSLIC on module 0, product 3, version 15 kernel: VoiceDAA System: 04 kernel: ISO-Cap is now up, line side: 03 rev 06 kernel: setting FXO tx gain for card=0 to 0 kernel: setting FXO rx gain for card=0 to 0 kernel: DEBUG fxotxgain:0.0 fxorxgain:0.0 kernel: Module 0: Installed -- AUTO FXO (FCC mode) kernel: ProSLIC on module 1, product 0, version 0 kernel: VoiceDAA System: 04 kernel: ISO-Cap is now up, line side: 03 rev 06 kernel: setting FXO tx gain for card=1 to 0 kernel: setting FXO rx gain for card=1 to 0 kernel: DEBUG fxotxgain:0.0 fxorxgain:0.0 kernel: Module 1: Installed -- AUTO FXO (FCC mode) kernel: ProSLIC on module 2, product 0, version 0 kernel: Module 2: Not installed kernel: ProSLIC on module 3, product 0, version 0 kernel: Module 3: Not installed kernel: Found a Wildcard TDM: Wildcard TDM400P REV I (2 modules) kernel: 4294908325 Polarity reversed (0 - -1) kernel: 4294908326 Polarity reversed (0 - 1) kernel: BATTERY on 1/1 (-)! kernel: NO BATTERY on 1/2! Any suggestion? Am i trying to do something that simply can't be done? Thanks, Enrico Maistro ___ ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Zaptel problem with pots lines
Hi Noah, Hi Enrico - I'm trying to get up and running a TDM400 with a standard italian pots line but i'm having problems at getting asterisk to detect when the line get answered on outgoing calls. I'm using asterisk 1.6 beta 9 with zaptel 1.4.11. Zaptel channels use fxs_ks signalling . I must admit I know nothing about Italian phone lines, but maybe you could try other signalling methods? Maybe ground start or loop start would work. - Noah Unfortunatly i already tried both loop start and ground start without any luck... after googling around for a while it seems clear that the right signalling to use here in Italy is ks. Enrico ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Zaptel problem with pots lines
Hi Giorgio, Giorgio Incantalupo wrote: Hi Enrico, have you tried with busydetect=yes? It (sometimes) worked for me with Asterisk 1.2. Giorgio I'm already using busydetect=yes to detect hangup and busy conditions with good results, but it doesn't seem to be of any help on detecting answer conditions. Enrico ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Zaptel problem with pots lines
Hi Marco, Marco Signorini wrote: Hi Enrico. In Italy the polarity reversal is never used. Good to know... at least i can stop messing with it. I'm using the TDM400 with an FXO port in Italy with the config reported below and is working properly in any situations: --- zaptel.conf --- fxsks=1 loadzone=it defaultzone=it My zaptel.conf is exactly the same. --- zapata.conf --- [channels] language=en context=from-tdm-fxo signalling=fxs_ks threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes busydetect=yes busycount=6 usecallerid=yes callerid=asreceived echocancel=yes echocancelwhenbridged=no relaxdtmf=yes rxgain=3.0 txgain=0.0 amaflags=billing group=1 callgroup=1 pickupgroup=1 jbenable=yes faxdetect=no channel = 1 My zapata.conf differs in: language = it instead of en rxgain = 0.0 instead of 3.0 jbenable = no instead of yes Unfortunatly even with your exact same configuration nothing change. I'm using zaptel-1.4.6 and asterisk-1.4.20.1. I'll give a try with zaptel-1.4.6... I hope this could help you. Best regards, Marco Signorini. Regards, Enrico Maistro ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Zaptel problem with pots lines
Hi Enrico. I'm quite sure that the differences you have in the zapata.conf doesn't have any effect on the problem. If I'm not wrong: language=it tells asterisk to use the italian sounds (if available) for any calls related to this zap channel; rxgain = 0.0 is related only to perceived audio gain jbenable = no is forcing the jitter buffer off for this zap channel. Let us know if you have problems with zaptel-1.4.6. I can assure that with this version and this configuration more than one installation with TDM400P I'm responsible for is working fine (since 1.4.6 came out). Could be that the problem is related to Asterisk 1.6? Unfortunately I never had the possibility to try this new version. Best regards, Marco Signorini. Enrico Maistro wrote: My zapata.conf differs in: language = it instead of en rxgain = 0.0 instead of 3.0 jbenable = no instead of yes Unfortunatly even with your exact same configuration nothing change. I'm using zaptel-1.4.6 and asterisk-1.4.20.1. I'll give a try with zaptel-1.4.6... ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Zaptel problem with pots lines
On Mon, Jul 14, 2008 at 08:56:40PM +0200, Enrico Maistro wrote: Hi, I'm trying to get up and running a TDM400 with a standard italian pots line but i'm having problems at getting asterisk to detect when the line get answered on outgoing calls. AFAIK chan_zap can only detect answer if it is provided through a polarity reversal. -- Tzafrir Cohen icq#16849755 jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Zaptel problem with pots lines
Hi Tzafrir, you're right. I think I've completely misunderstood the problem. If the problem is that asterisk is not able to write in the CDR the proper line answer status, I can confirm that even my installations behave the same. Sorry Enrico for my fault and thank you to Tzafrir for the correction. Best regards, Marco Signorini. Tzafrir Cohen wrote: On Mon, Jul 14, 2008 at 08:56:40PM +0200, Enrico Maistro wrote: Hi, I'm trying to get up and running a TDM400 with a standard italian pots line but i'm having problems at getting asterisk to detect when the line get answered on outgoing calls. AFAIK chan_zap can only detect answer if it is provided through a polarity reversal. ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Zaptel problem with pots lines
Hi, I'm trying to get up and running a TDM400 with a standard italian pots line but i'm having problems at getting asterisk to detect when the line get answered on outgoing calls. I'm using asterisk 1.6 beta 9 with zaptel 1.4.11. I tried with and without answeronpolarityswitch=yes but it didn't change anything at all. With callprogress=yes answer get never detected. With callprogress=no line get answered as soon as it start ringing, regardless if someone really answer the call. Zaptel channels use fxs_ks signalling . Loading wctdm module with debug=1 result in: kernel: Freshmaker version: 73 kernel: Freshmaker passed register test kernel: ProSLIC on module 0, product 3, version 15 kernel: VoiceDAA System: 04 kernel: ISO-Cap is now up, line side: 03 rev 06 kernel: setting FXO tx gain for card=0 to 0 kernel: setting FXO rx gain for card=0 to 0 kernel: DEBUG fxotxgain:0.0 fxorxgain:0.0 kernel: Module 0: Installed -- AUTO FXO (FCC mode) kernel: ProSLIC on module 1, product 0, version 0 kernel: VoiceDAA System: 04 kernel: ISO-Cap is now up, line side: 03 rev 06 kernel: setting FXO tx gain for card=1 to 0 kernel: setting FXO rx gain for card=1 to 0 kernel: DEBUG fxotxgain:0.0 fxorxgain:0.0 kernel: Module 1: Installed -- AUTO FXO (FCC mode) kernel: ProSLIC on module 2, product 0, version 0 kernel: Module 2: Not installed kernel: ProSLIC on module 3, product 0, version 0 kernel: Module 3: Not installed kernel: Found a Wildcard TDM: Wildcard TDM400P REV I (2 modules) kernel: 4294908325 Polarity reversed (0 - -1) kernel: 4294908326 Polarity reversed (0 - 1) kernel: BATTERY on 1/1 (-)! kernel: NO BATTERY on 1/2! Any suggestion? Am i trying to do something that simply can't be done? Thanks, Enrico Maistro ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Zaptel problem with pots lines
Hi Enrico - I'm trying to get up and running a TDM400 with a standard italian pots line but i'm having problems at getting asterisk to detect when the line get answered on outgoing calls. I'm using asterisk 1.6 beta 9 with zaptel 1.4.11. Zaptel channels use fxs_ks signalling . I must admit I know nothing about Italian phone lines, but maybe you could try other signalling methods? Maybe ground start or loop start would work. - Noah ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] ZAPTEL problem
Hi I have 100XP Digium clone card Installed in my pc and compiled zaptel and asterisk again after installing the card but after i rebooted i can load zaptel and wcfxo modprobe with out any problem but when i intiated ztcfg - i get the following error Zaptel Configuration == 1 channels configured. ZT_CHANCONFIG failed on channel 1: No such device or address (6) - dmesg errors Zapata Telephony Interface Unloaded Zapata Telephony Interface Registered on major 196 Zaptel Version: SVN-branch-1.2-r1725 Echo Canceller: KB1 Failed to initailize DAA, giving up... wcfxo: probe of :00:10.0 failed with error -5 -- lspci 00:0c.1 SCSI storage controller: Adaptec AIC-7896U2/7897U2 00:10.0 Communication controller: Motorola Unknown device 5608 any suggestions ram ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] ZAPTEL problem
On Mon, May 28, 2007 at 02:22:34PM +0530, ram wrote: Hi I have 100XP Digium clone card Installed in my pc and compiled zaptel and asterisk again after installing the card but after i rebooted i can load zaptel and wcfxo modprobe with out any problem but when i intiated ztcfg - i get the following error Zaptel Configuration == 1 channels configured. ZT_CHANCONFIG failed on channel 1: No such device or address (6) No device to talk to. Why? - dmesg errors Zapata Telephony Interface Unloaded Zapata Telephony Interface Registered on major 196 Zaptel Version: SVN-branch-1.2-r1725 Echo Canceller: KB1 Failed to initailize DAA, giving up... wcfxo: probe of :00:10.0 failed with error -5 The problem is here. Defective card? PCI-level problems? An example of PCI-level issues is the following magic that worked for me with several cards with some computers (at least with some specific kernels) - adding the boot parameter 'pci=noacpi' to the kernel command-line. -- lspci 00:0c.1 SCSI storage controller: Adaptec AIC-7896U2/7897U2 00:10.0 Communication controller: Motorola Unknown device 5608 I assume that the second line is the X100P card. -- Tzafrir Cohen icq#16849755jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] ZAPTEL PROBLEM
Hi all, I am using a TDM400P card with 2 FXS and 2 FXO modules. Everything seems nice, but i'm not able to make calls nor to receive any. When I try to make a call, I keep receiven the all circuits are busy now message, and when I receive calls, asterisk doesn't seems to care (don't get anything on the CLI) I'm using Asterisk 1.2.17 and Zaptel 1.2.16 from Xorcom's repository voip:~# asterisk -rx 'zap show status' Description Alarms IRQbpviol CRC4 Wildcard TDM400P REV I Board 1 OK 0 0 0 voip:~# asterisk -rx 'zap show channels' Chan Extension Context Language MusicOnHold pseudofrom-internal es 1from-internal es 2from-internal es 3from-pstn es 4from-pstn es I thought it could be an IRQ problem, but everything seems fine voip:~# cat /proc/interrupts CPU0 0: 118621819 XT-PIC timer 1:811 XT-PIC i8042 2: 0 XT-PIC cascade 5: 0 XT-PIC uhci_hcd:usb3, via82cxxx 6: 5 XT-PIC floppy 7: 0 XT-PIC parport0 8: 1 XT-PIC rtc 9: 0 XT-PIC acpi 10:2879759 XT-PIC uhci_hcd:usb2, eth0 11:3048189 XT-PIC uhci_hcd:usb1, eth1 12: 474378440 XT-PIC ehci_hcd:usb4, wctdm 14:1074418 XT-PIC ide0 15:4239765 XT-PIC ide1 NMI: 0 LOC: 0 ERR: 0 MIS: 0 Hope you can help me with my problem. -- Diego Quintana a.k.a. RouterMaN Ingeniero de las Telecomunicaciones Linux Registered User #382615 - http://counter.li.org/ SIP # 1-747-633-6676 Ext. 1011 FWD # 764839 Ext. 1011 http://routerman.blogsome.com http://gst.telecom.pucp.edu.pe ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] ZAPTEL PROBLEM
On Mon, Apr 30, 2007 at 12:25:07PM -0500, Diego Quintana Cruz wrote: Hi all, I am using a TDM400P card with 2 FXS and 2 FXO modules. Everything seems nice, but i'm not able to make calls nor to receive any. When I try to make a call, I keep receiven the all circuits are busy now message, and when I receive calls, asterisk doesn't seems to care (don't get anything on the CLI) set verbose 3? Call from where? To where? Do you see the relevant channel as offhook in 'zap show channel N' ? Sanity check: asterisk -rx 'show channels' (hmm... asterisk -n -rx 'show channels'hangs for you as well?) I'm using Asterisk 1.2.17 and Zaptel 1.2.16 from Xorcom's repository asterisk-classic or asterisk-bristuff? voip:~# asterisk -rx 'zap show status' Description Alarms IRQbpviol CRC4 Wildcard TDM400P REV I Board 1 OK 0 0 0 voip:~# asterisk -rx 'zap show channels' Chan Extension Context Language MusicOnHold pseudofrom-internal es 1from-internal es 2from-internal es 3from-pstn es 4from-pstn es I thought it could be an IRQ problem, but everything seems fine voip:~# cat /proc/interrupts CPU0 0: 118621819 XT-PIC timer 1:811 XT-PIC i8042 2: 0 XT-PIC cascade 5: 0 XT-PIC uhci_hcd:usb3, via82cxxx 6: 5 XT-PIC floppy 7: 0 XT-PIC parport0 8: 1 XT-PIC rtc 9: 0 XT-PIC acpi 10:2879759 XT-PIC uhci_hcd:usb2, eth0 11:3048189 XT-PIC uhci_hcd:usb1, eth1 12: 474378440 XT-PIC ehci_hcd:usb4, wctdm ehci_hcd:usb4 does normally take all the USB interrupts. However this issue is probably not related to missed interrupts , if there are any. 14:1074418 XT-PIC ide0 15:4239765 XT-PIC ide1 NMI: 0 LOC: 0 ERR: 0 MIS: 0 -- Tzafrir Cohen icq#16849755jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] ZAPTEL PROBLEM
2007/4/30, Tzafrir Cohen [EMAIL PROTECTED]: On Mon, Apr 30, 2007 at 12:25:07PM -0500, Diego Quintana Cruz wrote: Hi all, I am using a TDM400P card with 2 FXS and 2 FXO modules. Everything seems nice, but i'm not able to make calls nor to receive any. When I try to make a call, I keep receiven the all circuits are busy now message, and when I receive calls, asterisk doesn't seems to care (don't get anything on the CLI) set verbose 3? Call from where? To where? From PSTN to Asterisk and viceversa Do you see the relevant channel as offhook in 'zap show channel N' ? I'm not able to to see the channel anymore. voip*CLI zap show channel 3 Unable to find given channel 3 I found that this error happens every time i receive an inbound call: Apr 30 15:08:39 NOTICE[6003] chan_zap.c: Got ZT_EVENT_REMOVED. Destroying channel 3 Sanity check: asterisk -rx 'show channels' voip*CLI show channels Channel Location State Application(Data) 0 active channels 0 active calls voip*CLI zap show channels Chan Extension Context Language MusicOnHold pseudofrom-internal es 1from-internal es 2from-internal es 4from-zaptel es (hmm... asterisk -n -rx 'show channels'hangs for you as well?) I'm using Asterisk 1.2.17 and Zaptel 1.2.16 from Xorcom's repository asterisk-classic or asterisk-bristuff? asterisk-classic voip:~# asterisk -rx 'zap show status' Description Alarms IRQbpviol CRC4 Wildcard TDM400P REV I Board 1 OK 0 0 0 voip:~# asterisk -rx 'zap show channels' Chan Extension Context Language MusicOnHold pseudofrom-internal es 1from-internal es 2from-internal es 3from-pstn es 4from-pstn es I thought it could be an IRQ problem, but everything seems fine voip:~# cat /proc/interrupts CPU0 0: 118621819 XT-PIC timer 1:811 XT-PIC i8042 2: 0 XT-PIC cascade 5: 0 XT-PIC uhci_hcd:usb3, via82cxxx 6: 5 XT-PIC floppy 7: 0 XT-PIC parport0 8: 1 XT-PIC rtc 9: 0 XT-PIC acpi 10:2879759 XT-PIC uhci_hcd:usb2, eth0 11:3048189 XT-PIC uhci_hcd:usb1, eth1 12: 474378440 XT-PIC ehci_hcd:usb4, wctdm ehci_hcd:usb4 does normally take all the USB interrupts. However this issue is probably not related to missed interrupts , if there are any. 14:1074418 XT-PIC ide0 15:4239765 XT-PIC ide1 NMI: 0 LOC: 0 ERR: 0 MIS: 0 Any help would be appreciated -- Diego Quintana a.k.a. RouterMaN Ingeniero de las Telecomunicaciones Linux Registered User #382615 - http://counter.li.org/ SIP # 1-747-633-6676 Ext. 1011 FWD # 764839 Ext. 1011 http://routerman.blogsome.com http://gst.telecom.pucp.edu.pe ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] ZAPTEL PROBLEM
On Mon, Apr 30, 2007 at 12:25:07PM -0500, Diego Quintana Cruz wrote: Hi all, I am using a TDM400P card with 2 FXS and 2 FXO modules. Everything seems nice, but i'm not able to make calls nor to receive any. When I try to make a call, I keep receiven the all circuits are busy now message, and when I receive calls, asterisk doesn't seems to care (don't get anything on the CLI) I'm using Asterisk 1.2.17 and Zaptel 1.2.16 from Xorcom's repository voip:~# asterisk -rx 'zap show status' Description Alarms IRQbpviol CRC4 Wildcard TDM400P REV I Board 1 OK 0 0 0 voip:~# asterisk -rx 'zap show channels' Chan Extension Context Language MusicOnHold pseudofrom-internal es 1from-internal es 2from-internal es 3from-pstn es 4from-pstn es After some further digging: it turns out that when there' a problem, the output of the above command is actually: voip:~# asterisk -rx 'zap show channels' Chan Extension Context Language MusicOnHold pseudofrom-internal es 1from-internal es 2from-internal es 4from-pstn es that is: channel 3 has been destroyed. The logs show: Apr 30 14:50:53 DEBUG[6003] chan_zap.c: Message status for 401 changed from -1 to 0 on 1 Apr 30 14:51:00 NOTICE[6003] chan_zap.c: Got ZT_EVENT_REMOVED. Destroying channel 3 Apr 30 14:51:16 DEBUG[6004] chan_sip.c: Stopping retransmission on [snipped by Tzafrir] This seems to happen when you disconnect an incoming FXO call. ZT_EVENT_REMOVED is defined to be 20 . That package includes a patch that has been applied to trunk in rev 58321. Anybody encountered this in Asterisk/trunk with a wctdm card with an FXO module? -- Tzafrir Cohen icq#16849755jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] ZAPTEL PROBLEM
On Mon, Apr 30, 2007 at 11:37:22PM +0300, Tzafrir Cohen wrote: The logs show: Apr 30 14:50:53 DEBUG[6003] chan_zap.c: Message status for 401 changed from -1 to 0 on 1 Apr 30 14:51:00 NOTICE[6003] chan_zap.c: Got ZT_EVENT_REMOVED. Destroying channel 3 Apr 30 14:51:16 DEBUG[6004] chan_sip.c: Stopping retransmission on [snipped by Tzafrir] This seems to happen when you disconnect an incoming FXO call. ZT_EVENT_REMOVED is defined to be 20 . That package includes a patch that has been applied to trunk in rev 58321. oops. With one minor difference: the patch that went into trunk included an extra break that prevented polarity reversal events from falling through to the ZT_EVENT_REMOVED . In short: not a problem with trunk, only with my package. I'll upload fixed packages shortly. -- Tzafrir Cohen icq#16849755jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] Zaptel problem after upgrading to 1.2.16
Never mind - I seem to have fixed this. I had unloaded zaptel and wctdm when recompiling everything, so asterisk apparently didn't compile those modules because I assume it didn't think I had the hardware installed. All working! From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Drew Gibson Sent: Saturday, 10 March 2007 12:04 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Zaptel problem after upgrading to 1.2.16 Mark Davies wrote: Hi guys, I'm hoping I've made a silly mistake here, but I've been staring at the screen for the past few hours and I can't work it out. I upgraded to 1.2.16 recently, and am having problems with zaptel. The card is detected, I get a reasonable output from ztcfg -vv, and zttool shows the installed module (TDM400) with one FXS module. But when I start asterisk, I get an error saying that my IAX connection won't work in trunked mode because there's no timing interface. Zaptel doesn't show up in the output of show channeltypes. Should there be a problem with using the trunk version of zaptel, but 1.2.16 of asterisk? Are there any places that I can specifically load/enable the zaptel module? Is there a chan_zap.so in /usr/lib/asterisk/modules? Are you upgrading over an existing install of Asterisk, or did you remove the old ver first? I had trouble building Asterisk 1.2.15 with the 1.4 zaptel driver. Asterisk did not find the zaptel src and wouldn't build chan_zap.so. regards, Drew -- Drew Gibson Systems Administrator OANDA Corporation www.oanda.com ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Zaptel problem after upgrading to 1.2.16
On Fri, Mar 09, 2007 at 04:13:04PM +0900, Mark Davies wrote: Hi guys, I'm hoping I've made a silly mistake here, but I've been staring at the screen for the past few hours and I can't work it out. I upgraded to 1.2.16 recently, and am having problems with zaptel. The card is detected, I get a reasonable output from ztcfg -vv, and zttool shows the installed module (TDM400) with one FXS module. Can you use those modules from Asterisk? Do you get a dialtone on the phone? But when I start asterisk, I get an error saying that my IAX connection won't work in trunked mode because there's no timing interface. Zaptel doesn't show up in the output of show channeltypes. Is there any? Is chan_zap.so loaded ? Do you even have /usr/lib/asterisk/modules/chan_zap.so ? If yes: do you have a valid timing source: try zttest . Should there be a problem with using the trunk version of zaptel, but 1.2.16 of asterisk? Did the same configuration work with other versions of Asterisk 1.2? What version of Zaptel do you have? Are there any places that I can specifically load/enable the zaptel module? Do you have automatic modules loading enabled in modules.conf? -- Tzafrir Cohen icq#16849755jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Zaptel problem after upgrading to 1.2.16
Mark Davies wrote: Hi guys, I'm hoping I've made a silly mistake here, but I've been staring at the screen for the past few hours and I can't work it out. I upgraded to 1.2.16 recently, and am having problems with zaptel. The card is detected, I get a reasonable output from ztcfg -vv, and zttool shows the installed module (TDM400) with one FXS module. But when I start asterisk, I get an error saying that my IAX connection won't work in trunked mode because there's no timing interface. Zaptel doesn't show up in the output of show channeltypes. Should there be a problem with using the trunk version of zaptel, but 1.2.16 of asterisk? Are there any places that I can specifically load/enable the zaptel module? Is there a chan_zap.so in /usr/lib/asterisk/modules? Are you upgrading over an existing install of Asterisk, or did you remove the old ver first? I had trouble building Asterisk 1.2.15 with the 1.4 zaptel driver. Asterisk did not find the zaptel src and wouldn't build chan_zap.so. regards, Drew -- Drew Gibson Systems Administrator OANDA Corporation www.oanda.com ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] Zaptel problem after upgrading to 1.2.16
Ah! No, there isn't a chan_zap.so in /usr/lib/asterisk/modules. I installed over a previous version, however I did delete the contents of /usr/lib/asterisk/modules before compiling and installing zaptel, libpri and asterisk. What is the best way to get chan_zap.so in there? Shouldn't that get installed when I do a make install of zaptel? Cheers, Mark. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Drew Gibson Sent: Saturday, 10 March 2007 12:04 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Zaptel problem after upgrading to 1.2.16 Mark Davies wrote: Hi guys, I'm hoping I've made a silly mistake here, but I've been staring at the screen for the past few hours and I can't work it out. I upgraded to 1.2.16 recently, and am having problems with zaptel. The card is detected, I get a reasonable output from ztcfg -vv, and zttool shows the installed module (TDM400) with one FXS module. But when I start asterisk, I get an error saying that my IAX connection won't work in trunked mode because there's no timing interface. Zaptel doesn't show up in the output of show channeltypes. Should there be a problem with using the trunk version of zaptel, but 1.2.16 of asterisk? Are there any places that I can specifically load/enable the zaptel module? Is there a chan_zap.so in /usr/lib/asterisk/modules? Are you upgrading over an existing install of Asterisk, or did you remove the old ver first? I had trouble building Asterisk 1.2.15 with the 1.4 zaptel driver. Asterisk did not find the zaptel src and wouldn't build chan_zap.so. regards, Drew -- Drew Gibson Systems Administrator OANDA Corporation www.oanda.com ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Zaptel problem after upgrading to 1.2.16
Hi guys, I'm hoping I've made a silly mistake here, but I've been staring at the screen for the past few hours and I can't work it out. I upgraded to 1.2.16 recently, and am having problems with zaptel. The card is detected, I get a reasonable output from ztcfg -vv, and zttool shows the installed module (TDM400) with one FXS module. But when I start asterisk, I get an error saying that my IAX connection won't work in trunked mode because there's no timing interface. Zaptel doesn't show up in the output of show channeltypes. Should there be a problem with using the trunk version of zaptel, but 1.2.16 of asterisk? Are there any places that I can specifically load/enable the zaptel module? Any help much appreciated before I go insane... J Regards, Mark. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Zaptel Problem - Unable to create channel of type 'Zap'
Hello all. I have a Digitum TE110P board configured and working (I think that it's working). When I configure in extensions.conf to a extension route to that board I get "Unable to create channel of type 'Zap'" on log. Here are some configuration: lspci -vv :01:07.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface Subsystem: Unknown device 795e:0001 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- Latency: 64 (250ns min, 32000ns max) Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at c800 [size=256] Region 1: Memory at fc5ff000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0+,D1-,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- ztcfg -vv Zaptel Configuration == SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: Individual Clear channel (Default) (Slaves: 01) Channel 02: Individual Clear channel (Default) (Slaves: 02) Channel 03: Individual Clear channel (Default) (Slaves: 03) Channel 04: Individual Clear channel (Default) (Slaves: 04) Channel 05: Individual Clear channel (Default) (Slaves: 05) Channel 06: Individual Clear channel (Default) (Slaves: 06) Channel 07: Individual Clear channel (Default) (Slaves: 07) Channel 08: Individual Clear channel (Default) (Slaves: 08) Channel 09: Individual Clear channel (Default) (Slaves: 09) Channel 10: Individual Clear channel (Default) (Slaves: 10) Channel 11: Individual Clear channel (Default) (Slaves: 11) Channel 12: Individual Clear channel (Default) (Slaves: 12) Channel 13: Individual Clear channel (Default) (Slaves: 13) Channel 14: Individual Clear channel (Default) (Slaves: 14) Channel 15: Individual Clear channel (Default) (Slaves: 15) Channel 16: D-channel (Default) (Slaves: 16) Channel 17: Individual Clear channel (Default) (Slaves: 17) Channel 18: Individual Clear channel (Default) (Slaves: 18) Channel 19: Individual Clear channel (Default) (Slaves: 19) Channel 20: Individual Clear channel (Default) (Slaves: 20) Channel 21: Individual Clear channel (Default) (Slaves: 21) Channel 22: Individual Clear channel (Default) (Slaves: 22) Channel 23: Individual Clear channel (Default) (Slaves: 23) Channel 24: Individual Clear channel (Default) (Slaves: 24) Channel 25: Individual Clear channel (Default) (Slaves: 25) Channel 26: Individual Clear channel (Default) (Slaves: 26) Channel 27: Individual Clear channel (Default) (Slaves: 27) Channel 28: Individual Clear channel (Default) (Slaves: 28) Channel 29: Individual Clear channel (Default) (Slaves: 29) Channel 30: Individual Clear channel (Default) (Slaves: 30) Channel 31: Individual Clear channel (Default) (Slaves: 31) 31 channels configured. My zaptel.cfg span=1,0,0,cas,hdb3 loadzone=us defaultzone=us bchan=1-15,17-31 dchan=16 My zapata.conf [channels] context=customer signalling=pri_cpe channel = 1 My extensions.conf exten = 4502,1,Dial(Zap/1/4502) show channels in Asterisk CLI: Channel (Context Extension Pri ) State Appl. Data 0 active channel(s) zap show channels in Asterisk CLI: Chan Extension Context Language MusicOnHold pseudo customer 1 customer zap show channel 1 in Asterisk CLI: hannel: 1 File Descriptor: 10 Span: 1 Extension: Dialing: no Context: corsidian Caller ID string: Destroy: 0 InAlarm: 0 Signalling Type: PRI Signalling Owner: None Real: None Callwait: None Threeway: None Confno: -1 Propagated Conference: -1 Real in conference: 0 DSP: no Relax DTMF: no Dialing/CallwaitCAS: 0/0 Default law: alaw Fax Handled: no Pulse phone: no Echo Cancellation: 0 taps unless TDM bridged, currently OFF PRI Flags: PRI Logical Span: Implicit Actual Hookstate: Onhook When I dial 4502 in the softphone I get "Unable to create channel of type 'Zap'". Could anybody give to me a little help ? Thanks a lot ! Lincoln ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Zaptel Problem - Unable to create channel of type 'Zap'
Are you sure the other end is configured properly? What does zttool says? Have you turned on all the asterisk debug messages to look further? Regards On 7/19/06, Lincoln Zuljewic Silva [EMAIL PROTECTED] wrote: Hello all. I have a Digitum TE110P board configured and working (I think that it's working). When I configure in extensions.conf to a extension route to that board I get Unable to create channel of type 'Zap' on log. Here are some configuration: lspci -vv :01:07.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface Subsystem: Unknown device 795e:0001 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- Latency: 64 (250ns min, 32000ns max) Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at c800 [size=256] Region 1: Memory at fc5ff000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0+,D1-,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- ztcfg -vv Zaptel Configuration == SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: Individual Clear channel (Default) (Slaves: 01) Channel 02: Individual Clear channel (Default) (Slaves: 02) Channel 03: Individual Clear channel (Default) (Slaves: 03) Channel 04: Individual Clear channel (Default) (Slaves: 04) Channel 05: Individual Clear channel (Default) (Slaves: 05) Channel 06: Individual Clear channel (Default) (Slaves: 06) Channel 07: Individual Clear channel (Default) (Slaves: 07) Channel 08: Individual Clear channel (Default) (Slaves: 08) Channel 09: Individual Clear channel (Default) (Slaves: 09) Channel 10: Individual Clear channel (Default) (Slaves: 10) Channel 11: Individual Clear channel (Default) (Slaves: 11) Channel 12: Individual Clear channel (Default) (Slaves: 12) Channel 13: Individual Clear channel (Default) (Slaves: 13) Channel 14: Individual Clear channel (Default) (Slaves: 14) Channel 15: Individual Clear channel (Default) (Slaves: 15) Channel 16: D-channel (Default) (Slaves: 16) Channel 17: Individual Clear channel (Default) (Slaves: 17) Channel 18: Individual Clear channel (Default) (Slaves: 18) Channel 19: Individual Clear channel (Default) (Slaves: 19) Channel 20: Individual Clear channel (Default) (Slaves: 20) Channel 21: Individual Clear channel (Default) (Slaves: 21) Channel 22: Individual Clear channel (Default) (Slaves: 22) Channel 23: Individual Clear channel (Default) (Slaves: 23) Channel 24: Individual Clear channel (Default) (Slaves: 24) Channel 25: Individual Clear channel (Default) (Slaves: 25) Channel 26: Individual Clear channel (Default) (Slaves: 26) Channel 27: Individual Clear channel (Default) (Slaves: 27) Channel 28: Individual Clear channel (Default) (Slaves: 28) Channel 29: Individual Clear channel (Default) (Slaves: 29) Channel 30: Individual Clear channel (Default) (Slaves: 30) Channel 31: Individual Clear channel (Default) (Slaves: 31) 31 channels configured. My zaptel.cfg span=1,0,0,cas,hdb3 loadzone=us defaultzone=us bchan=1-15,17-31 dchan=16 My zapata.conf [channels] context=customer signalling=pri_cpe channel = 1 My extensions.conf exten = 4502,1,Dial(Zap/1/4502) show channels in Asterisk CLI: Channel (ContextExtensionPri ) State Appl. Data 0 active channel(s) zap show channels in Asterisk CLI: Chan Extension Context Language MusicOnHold pseudocustomer 1customer zap show channel 1 in Asterisk CLI: hannel: 1 File Descriptor: 10 Span: 1 Extension: Dialing: no Context: corsidian Caller ID string: Destroy: 0 InAlarm: 0 Signalling Type: PRI Signalling Owner: None Real: None Callwait: None Threeway: None Confno: -1 Propagated Conference: -1 Real in conference: 0 DSP: no Relax DTMF: no Dialing/CallwaitCAS: 0/0 Default law: alaw Fax Handled: no Pulse phone: no Echo Cancellation: 0 taps unless TDM bridged, currently OFF PRI Flags: PRI Logical Span: Implicit Actual Hookstate: Onhook When I dial 4502 in the softphone I get Unable to create channel of type 'Zap'. Could anybody give to me a little help ? Thanks a lot ! Lincoln ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Su nombre es GNU/Linux, no solamente Linux, mas info en http://www.gnu.org; ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit:
Re: [asterisk-users] Zaptel Problem - Unable to create channel of type 'Zap'
Hello Moises. I enabled debug mode in asterisk. When I dial, I get:
Jul 19 14:24:38 DEBUG[4463]: build_route: Contact hop:
sip:192.168.0.6:5060
Jul 19 14:24:38 VERBOSE[4463]: -- Executing
Dial("SIP/192.168.0.6-08137090", "Zap/1/4502") in new stack
Jul 19 14:24:38 NOTICE[4463]: Unable to create channel of type 'Zap'
Jul 19 14:24:38 VERBOSE[4463]: == Everyone is busy/congested at this
time
Jul 19 14:24:38 DEBUG[4463]: Exiting with DIALSTATUS=CHANUNAVAIL.
zttool say:
OK Digium Wildcard TE110P T1/E1 Card 0
Current Alarms: No alarms.
Sync Source: Internally clocked
IRQ Misses: 14
Bipolar Viol: 0
Tx/Rx Levels: 0/ 0
Total/Conf/Act: 31/ 31/ 0
112333
1234567890123456789012345789012
I thing that the other end it's ok because I can close the ISDN Link
between the two machines.
Thanks
Lincoln
Moises Silva wrote:
Are you sure the other end is configured properly?
What does "zttool" says?
Have you turned on all the asterisk debug messages to look further?
Regards
On 7/19/06, Lincoln Zuljewic Silva [EMAIL PROTECTED] wrote:
Hello all. I have a Digitum TE110P board configured and working (I
think
that it's working). When I configure in extensions.conf to a extension
route
to that board I get "Unable to create channel of type 'Zap'" on log.
Here are some configuration:
lspci -vv
:01:07.0 Network controller: Tiger Jet Network Inc. Tiger3XX
Modem/ISDN
interface
Subsystem: Unknown device 795e:0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
TAbort-
TAbort- MAbort- SERR- PERR-
Latency: 64 (250ns min, 32000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at c800 [size=256]
Region 1: Memory at fc5ff000 (32-bit, non-prefetchable)
[size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA
PME(D0+,D1-,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
ztcfg -vv
Zaptel Configuration
==
SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 01: Individual Clear channel (Default) (Slaves: 01)
Channel 02: Individual Clear channel (Default) (Slaves: 02)
Channel 03: Individual Clear channel (Default) (Slaves: 03)
Channel 04: Individual Clear channel (Default) (Slaves: 04)
Channel 05: Individual Clear channel (Default) (Slaves: 05)
Channel 06: Individual Clear channel (Default) (Slaves: 06)
Channel 07: Individual Clear channel (Default) (Slaves: 07)
Channel 08: Individual Clear channel (Default) (Slaves: 08)
Channel 09: Individual Clear channel (Default) (Slaves: 09)
Channel 10: Individual Clear channel (Default) (Slaves: 10)
Channel 11: Individual Clear channel (Default) (Slaves: 11)
Channel 12: Individual Clear channel (Default) (Slaves: 12)
Channel 13: Individual Clear channel (Default) (Slaves: 13)
Channel 14: Individual Clear channel (Default) (Slaves: 14)
Channel 15: Individual Clear channel (Default) (Slaves: 15)
Channel 16: D-channel (Default) (Slaves: 16)
Channel 17: Individual Clear channel (Default) (Slaves: 17)
Channel 18: Individual Clear channel (Default) (Slaves: 18)
Channel 19: Individual Clear channel (Default) (Slaves: 19)
Channel 20: Individual Clear channel (Default) (Slaves: 20)
Channel 21: Individual Clear channel (Default) (Slaves: 21)
Channel 22: Individual Clear channel (Default) (Slaves: 22)
Channel 23: Individual Clear channel (Default) (Slaves: 23)
Channel 24: Individual Clear channel (Default) (Slaves: 24)
Channel 25: Individual Clear channel (Default) (Slaves: 25)
Channel 26: Individual Clear channel (Default) (Slaves: 26)
Channel 27: Individual Clear channel (Default) (Slaves: 27)
Channel 28: Individual Clear channel (Default) (Slaves: 28)
Channel 29: Individual Clear channel (Default) (Slaves: 29)
Channel 30: Individual Clear channel (Default) (Slaves: 30)
Channel 31: Individual Clear channel (Default) (Slaves: 31)
31 channels configured.
My zaptel.cfg
span=1,0,0,cas,hdb3
loadzone=us
defaultzone=us
bchan=1-15,17-31
dchan=16
My zapata.conf
[channels]
context=customer
signalling=pri_cpe
channel = 1
My extensions.conf
exten = 4502,1,Dial(Zap/1/4502)
show channels in Asterisk CLI:
Channel (Context Extension Pri ) State Appl.
Data
0 active channel(s)
zap show channels in Asterisk CLI:
Chan Extension Context Language MusicOnHold
pseudo customer
1 customer
zap show channel 1 in Asterisk CLI:
hannel: 1
File Descriptor: 10
Span: 1
Extension:
Dialing: no
Context:
Re: [asterisk-users] Zaptel Problem - Unable to create channel of type 'Zap'
Im not a PRI guru, just configured once one of our asterisk servers in loop using PRI for testing purposes (we were getting problems with MFCR2). But for my experience i can tell you that OK in zttool (no alarms) does not means that everything should work. Only the physical link is ok, but the call protocol may be having problems. I know you have a card with only one port, but a very good test would be make a crossover cable and make a loop in your box, configuring 2 spans, one of them as pri_cpe and the other as pri_net to see if you can make calls that way. Regards On 7/19/06, Lincoln Zuljewic Silva [EMAIL PROTECTED] wrote: Hello Moises. I enabled debug mode in asterisk. When I dial, I get: Jul 19 14:24:38 DEBUG[4463]: build_route: Contact hop: sip:192.168.0.6:5060 Jul 19 14:24:38 VERBOSE[4463]: -- Executing Dial(SIP/192.168.0.6-08137090, Zap/1/4502) in new stack Jul 19 14:24:38 NOTICE[4463]: Unable to create channel of type 'Zap' Jul 19 14:24:38 VERBOSE[4463]: == Everyone is busy/congested at this time Jul 19 14:24:38 DEBUG[4463]: Exiting with DIALSTATUS=CHANUNAVAIL. zttool say: OK Digium Wildcard TE110P T1/E1 Card 0 Current Alarms: No alarms. Sync Source:Internally clocked IRQ Misses: 14 Bipolar Viol: 0 Tx/Rx Levels: 0/ 0 Total/Conf/Act: 31/ 31/ 0 112333 1234567890123456789012345789012 I thing that the other end it's ok because I can close the ISDN Link between the two machines. Thanks Lincoln Moises Silva wrote: Are you sure the other end is configured properly? What does zttool says? Have you turned on all the asterisk debug messages to look further? Regards On 7/19/06, Lincoln Zuljewic Silva [EMAIL PROTECTED] wrote: Hello all. I have a Digitum TE110P board configured and working (I think that it's working). When I configure in extensions.conf to a extension route to that board I get Unable to create channel of type 'Zap' on log. Here are some configuration: lspci -vv :01:07.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface Subsystem: Unknown device 795e:0001 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- Latency: 64 (250ns min, 32000ns max) Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at c800 [size=256] Region 1: Memory at fc5ff000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0+,D1-,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- ztcfg -vv Zaptel Configuration == SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: Individual Clear channel (Default) (Slaves: 01) Channel 02: Individual Clear channel (Default) (Slaves: 02) Channel 03: Individual Clear channel (Default) (Slaves: 03) Channel 04: Individual Clear channel (Default) (Slaves: 04) Channel 05: Individual Clear channel (Default) (Slaves: 05) Channel 06: Individual Clear channel (Default) (Slaves: 06) Channel 07: Individual Clear channel (Default) (Slaves: 07) Channel 08: Individual Clear channel (Default) (Slaves: 08) Channel 09: Individual Clear channel (Default) (Slaves: 09) Channel 10: Individual Clear channel (Default) (Slaves: 10) Channel 11: Individual Clear channel (Default) (Slaves: 11) Channel 12: Individual Clear channel (Default) (Slaves: 12) Channel 13: Individual Clear channel (Default) (Slaves: 13) Channel 14: Individual Clear channel (Default) (Slaves: 14) Channel 15: Individual Clear channel (Default) (Slaves: 15) Channel 16: D-channel (Default) (Slaves: 16) Channel 17: Individual Clear channel (Default) (Slaves: 17) Channel 18: Individual Clear channel (Default) (Slaves: 18) Channel 19: Individual Clear channel (Default) (Slaves: 19) Channel 20: Individual Clear channel (Default) (Slaves: 20) Channel 21: Individual Clear channel (Default) (Slaves: 21) Channel 22: Individual Clear channel (Default) (Slaves: 22) Channel 23: Individual Clear channel (Default) (Slaves: 23) Channel 24: Individual Clear channel (Default) (Slaves: 24) Channel 25: Individual Clear channel (Default) (Slaves: 25) Channel 26: Individual Clear channel (Default) (Slaves: 26) Channel 27: Individual Clear channel (Default) (Slaves: 27) Channel 28: Individual Clear channel (Default) (Slaves: 28) Channel 29: Individual Clear channel (Default) (Slaves: 29) Channel 30: Individual Clear channel (Default) (Slaves: 30) Channel 31: Individual Clear channel (Default) (Slaves: 31) 31 channels configured. My zaptel.cfg span=1,0,0,cas,hdb3 loadzone=us defaultzone=us bchan=1-15,17-31 dchan=16 My
[Asterisk-Users] Zaptel problem on 4 Processor Opteron SMP system
Hi All,
I've just put together a system comprising of the following;
Hardware
2 x AMD Opteron 270 Processors (Dual Core)
Tyan K8WE Mobo
2GB Kingston PC3200 Registered RAM
2 x WD Raptor 1rpm 74Gb
Digium TE210p
Software
Mandriva 2006 Public Release (Kernel 2.6.12-12mdksmp)
Asterisk 1.2.4
Zaptel 1.2.3
Problem
Zaptel compiles and installs to the right place after modifiing /usr/src/linux2.6.12-12/Makefile EXTRAVERSION it then installs to /lib/modules/2.6.12-12mdksmp/misc/.
When I run modprobe zaptel I get FATAL: Error inserting zaptel (/lib/modules/2.6.12-12mdksmp/misc/zaptel.ko): Invalid module format
uname -a reveals;
[EMAIL PROTECTED] zaptel-1.2.3]# uname -a
Linux asteriskpbx 2.6.12-12mdksmp #1 SMP Fri Sep 9 17:20:34 CEST 2005 x86_64 Dual Core AMD Opteron(tm) Processor 270 unknown GNU/Linux
Both the kernel package and the kernel source package are exactly the same version 2.6.12-12mdksmp and 2.6.12-12mdk respectively.
Regards
Chris Teesdale
I.T. / I.P Telephony Development
Philips
Tel : 01325 384394 ex 246
fax : 01325 383876
Email : [EMAIL PROTECTED]
Web : http://www.philips.org.uk
IMPORTANT:
This email and any attachments may be confidential and/or privileged. Everything is intended for use of the addressee only. If you are not the
named addressee you must not disseminate, distribute or copy this email. If you receive this email in error please notify the sender by replying
to this email or by telephoning (+44)(0)870 609 1554 then delete this message from your system. Philips Collection Services Ltd. ("Philips")
routinely monitors the content of email sent and received on its network, to ensure compliance with its policies and procedures. Although
Philips have taken reasonable precautions to ensure no viruses are present in this email or any files attached to it, it cannot accept
any responsibility for any loss or damage arising from the use of this email or its attachments and advises you to carry out appropriate
virus checks. Philips are not responsible for any changes made to the message after it has been sent nor any files attached to it after
it was sent. Emails that contain encrypted material, program files, are obscene, inflammatory, criminal, offensive, in breach of copyright,
contain a virus or threat to computer systems, appear to be a threat to the company or in breach of company policy may be intercepted and/or deleted.
Philips does not accept any liability for any statements made which are clearly the sender's own and not made on behalf of Philips.
___
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Zaptel problem on 4 Processor Opteron SMP system
You can try to run "make" in the linux source-folder. I had
the same problem Running FedCore 4 on a Dual Xeon Server and running make fixed
the error
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Chris
TeesdaleSent: 15 February 2006 12:19To:
asterisk-users@lists.digium.comSubject: [Asterisk-Users] Zaptel
problem on 4 Processor Opteron SMP system
Hi All, I've just put together a system comprising of the
following; Hardware 2 x AMD Opteron 270 Processors (Dual Core)
Tyan K8WE Mobo 2GB Kingston PC3200 Registered RAM 2 x WD Raptor
1rpm 74Gb Digium TE210p Software Mandriva 2006 Public
Release (Kernel 2.6.12-12mdksmp) Asterisk 1.2.4 Zaptel 1.2.3
Problem Zaptel compiles and installs to the right place after
modifiing /usr/src/linux2.6.12-12/Makefile "EXTRAVERSION" it then installs to
"/lib/modules/2.6.12-12mdksmp/misc/". When I run "modprobe zaptel" I get
"FATAL: Error inserting zaptel (/lib/modules/2.6.12-12mdksmp/misc/zaptel.ko):
Invalid module format" uname -a reveals; "[EMAIL PROTECTED]
zaptel-1.2.3]# uname -a Linux asteriskpbx 2.6.12-12mdksmp #1 SMP Fri Sep 9
17:20:34 CEST 2005 x86_64 Dual Core AMD Opteron(tm) Processor 270 unknown
GNU/Linux" Both the kernel package and the kernel source package are
exactly the same version "2.6.12-12mdksmp and 2.6.12-12mdk"
respectively.
Regards Chris TeesdaleI.T. / I.P Telephony
DevelopmentPhilipsTel : 01325
384394 ex 246fax : 01325 383876Email : [EMAIL PROTECTED]Web : http://www.philips.org.uk
IMPORTANT: This email and any attachments may be confidential and/or
privileged. Everything is intended for use of the addressee only. If you are not
the named addressee you must not disseminate, distribute or copy this email. If
you receive this email in error please notify the sender by replying to this
email or by telephoning (+44)(0)870 609 1554 then delete this message from your
system. Philips Collection Services Ltd. ("Philips") routinely monitors the
content of email sent and received on its network, to ensure compliance with its
policies and procedures. Although Philips have taken reasonable precautions to
ensure no viruses are present in this email or any files attached to it, it
cannot accept any responsibility for any loss or damage arising from the use of
this email or its attachments and advises you to carry out appropriate virus
checks. Philips are not responsible for any changes made to the message after it
has been sent nor any files attached to it after it was sent. Emails that
contain encrypted material, program files, are obscene, inflammatory, criminal,
offensive, in breach of copyright, contain a virus or threat to computer
systems, appear to be a threat to the company or in breach of company policy may
be intercepted and/or deleted. Philips does not accept any liability for any
statements made which are clearly the sender's own and not made on behalf of
Philips.
___
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] zaptel problem
Hello people, i have a question concerning a quad-pri card (tor2 is the module for this card) i want the span to be completely shut down when alarms occur on it; i want the span to be shut down immediately to avoid compromising the whole box if one E1 line goes crazy and to be activated only by the administrator of the box... is there any posibility to do this? please note that i'm not a programmer and i don't know how to do this in C/C++ thank you, Calin S. ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Zaptel problem on BSD
I have some lines outside the USA that I can't get to for up-close testing. The issue is that when I make an outbound call on these lines, I don't get answer indication until 20 seconds into the call. Asterisk always thinks the line is answered, even if it's still ringing or busy. On incoming calls the opposite is true, Asterisk doesn't know the line has been hung up by the caller. This is with the latest zaptel BSD drivers on a TDM400P with 4 FXO's. Asterisk is HEAD from April. The lines are configured for Loopstart (I've tried kewlstart too, same result). There don't seem to be any polarity changes on the line for answer or disconnect. Anyone seen this before? I'd be happy if I could just have the lines think they are answered when dialling is complete. Mark ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Zaptel Problem after Upgrade
Hi, after upgrading to latest CVS (20.08) I have a problem with the connection to PSTN: When I try to make a call from PSTN to * I hear the number not available' sound and the following warnings on * console: Aug 20 12:09:55 WARNING[180235]: chan_zap.c:6762 zt_pri_error: PRI: !! Unknown IE 1329 (len = 3) Aug 20 12:09:55 WARNING[180235]: chan_zap.c:6762 zt_pri_error: PRI: !! Unknown IE 1330 (len = 3) The other way round still works although I also get a warning: Aug 20 12:10:39 WARNING[180235]: chan_zap.c:6762 zt_pri_error: PRI: !! Unknown IE 1330 (len = 3) I changed no config files, so that couldn't be the problem, or has anything changed since April (that was the CVS version with which it worked just fine). Thanks, best regards, Kurt ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] zaptel - problem solved
Hello again, My mistake, due to not having the usb loaded in the kernel. Recompiled it and asterisk installed. Sorry for the lame postings. Dinesh.
[Asterisk-Users] zaptel - problem solved
Hello again, My mistake, due to not having the usb loaded in the kernel. Recompiled it and asterisk installed. Sorry for the lame postings. Dinesh.
