hello,
I just installed a2billing, I did all the config, at least I guess ..
but I still can not integrate sip accounts that I had created (with sip.conf
) in a2billing to apply their billing ..
could someone tell me how to make the junction between asterisk and
a2billing??
I also noticed that the
Gorguez Ka писал 22.06.2012 15:31:
hello,
I just
installed a2billing, I did all the config, at least I guess ..
but I
still can not integrate sip accounts that I had created (with sip.conf)
in a2billing to apply their billing ..
could someone tell me how to
make the junction between
I confess that I had already generated sip accounts but I just delete them.
it remains in the dialplan a2billing and RateCard I created ..
Please can you tell me how to complete the setup?
2012/6/22 Mikhail Lischuk mlisc...@itx.com.ua
**
Gorguez Ka писал 22.06.2012 15:31:
hello,
I just
hi folks,
i was wondering if some one has a2billing script,which can be used to
install a2billing easly ?
thanks in advance
--
*
HARAZ Tahar
*
*Engineering Student at the National Institute for Posts and
Telecommunications (INPT)
*
*
Phone: +212 6 78030050
E-mail: harazta...@gmail.com
We have had success with this:
https://sites.google.com/site/a2billing2asterisk/
On Fri, Mar 16, 2012 at 1:28 PM, Tahar .H harazta...@gmail.com wrote:
hi folks,
i was wondering if some one has a2billing script,which can be used to
install a2billing easly ?
thanks in advance
--
*
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Baha @ SH
Sent: Saturday, October 23, 2010 7:32 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [asterisk-users] a2billing muting enter
, 2010 10:01 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] a2billing muting enter the phone number
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Baha @ SH
Sent
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Baha @ SH
Sent: Monday, October 25, 2010 4:59 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] a2billing muting enter
If you want to turn off the audio totally you can set audio to NO (it's
probably the 4th or 5th in list of Global settings). Otherway is to blank
the file responsible to play that file and keeping the settings intact.
However, there are numerous options to turn on and off the various
announcements
How can I mute the message please enter the number you wish to call and
press the # key in a2billing???
I tried
use_dnid = YES
but still I keep getting the message prompt...
thanks
--
_
-- Bandwidth and Colocation Provided by
: [asterisk-users] a2billing
I don't think voucher can be triggered to announce at certain threshold
ONLY but it will be run everytime at the begining after PIN is asked for. By
default it's set to: Press 8 to fill up with a voucher.
System Settings is the last in the menu.
-Bruce
On Tue
Not sure if a2billing can be shared here, but ill give a shot
If the credit min_credit the IVR play: sorry you have 0 credit and hangup,
I want it to FW me to the IVR to add voucher, please let me know: here is
log:
[18/10/2010 07:01:12]:[file:a2billing.php -
Turn on the voucher feature in System Settings and it will tell the user
right after the PIN authentication or CLID authentication that their balance
is below threshold and they should pay.
-Bruce
On Mon, Oct 18, 2010 at 2:35 PM, Baha @ SH i...@saudihome.com wrote:
Not sure if a2billing can be
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of bruce bruce
Sent: Monday, October 18, 2010 12:46 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] a2billing
Turn on the voucher feature in System Settings and it will tell the user
right after the PIN
...@lists.digium.com [mailto:
asterisk-users-boun...@lists.digium.com] *On Behalf Of *bruce bruce
*Sent:* Monday, October 18, 2010 12:46 PM
*To:* Asterisk Users Mailing List - Non-Commercial Discussion
*Subject:* Re: [asterisk-users] a2billing
Turn on the voucher feature in System Settings
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] a2billing
I don't think voucher can be triggered to announce at certain threshold ONLY
but it will be run everytime at the begining after PIN is asked for. By
default it's set to: Press 8 to fill up with a voucher
Hi all,
I am trying to integrate a2b with asterisk 1.6, but ,when i try to do external
call, I receive this mensage:
-- Executing [01221341...@ramais:1] AGI(SIP/3000-b5ba6e80, a2billing.php,2)
in new stack-- Launched AGI Script /var/lib/asterisk/agi-bin/a2billing.php
--
_
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Flavio Miranda
Sent: Thursday, September 30, 2010 2:44 PM
To: Asterisk Asterisk
Subject: [asterisk-users] a2billing
Hi all,
I am trying to integrate a2b with asterisk
)
Att,
Flavio Roberto Miranda
MSN:flaviormira...@hotmail.com
Skype: flaviormiranda
From: da...@debsinc.com
To: asterisk-users@lists.digium.com
Date: Thu, 30 Sep 2010 14:59:38 -0500
Subject: Re: [asterisk-users] a2billing
From:
asterisk-users-boun...@lists.digium.com
_
From: da...@debsinc.com
To: asterisk-users@lists.digium.com
Date: Thu, 30 Sep 2010 14:59:38 -0500
Subject: Re: [asterisk-users] a2billing
_
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Flavio Miranda
Sent
Hello
Change your a2b 1.8 version to a2b 1.7.1 version
1.7.1 version is a stable.
And forum for a2b is http://forum.asterisk2billing.org/index.php
--
Vardan Harutyunyan,
Senior System Administrator
Enterprise Incubator Foundation
123 Hovsep Emin Street,
Yerevan 0051, Republic of Armenia
Hi,
I am trying to configure a2billing 1.8 in my asterisk 1.6 but no value to
DIALPREFIX and DESTINATION PREFIX is accepted when I try to create a RATE.
thanks!
Att,
Flavio Roberto Miranda
MSN:flaviormira...@hotmail.com
Skype: flaviormiranda
...@lists.digium.com en nombre de Flavio Miranda
Enviado el: jue 16/09/2010 2:24
Para: Asterisk Asterisk
Asunto: [asterisk-users] a2billing
Hey there,
I am trying to setup a2billing on asterisk 1.6 , but ,when I try to access its
web page I see the a2billing directories:
Index of /a2billing
[ICO
*De:* asterisk-users-boun...@lists.digium.com en nombre de Flavio Miranda
*Enviado el:* jue 16/09/2010 2:24
*Para:* Asterisk Asterisk
*Asunto:* [asterisk-users] a2billing
Hey there,
I am trying to setup a2billing on asterisk 1.6 , but ,when I try to
access its web page I see
Hey there,
I am trying to setup a2billing on asterisk 1.6 , but ,when I try to access
its web page I see the a2billing directories:Index of /a2billingNameLast
modifiedSizeDescriptionParent Directory -admin/15-Sep-2010
19:19-agent/15-Sep-2010 19:21-common/15-Sep-2010
espcify the
account number and/or cc number and password for a new customer?
Thanks.
--- On Thu, 6/17/10, Vahan Yerkanian va...@arminco.com wrote:
From: Vahan Yerkanian va...@arminco.com
Subject: Re: [asterisk-users] a2billing for residential voip usage
To: asterisk-users@lists.digium.com
Yerkanianva...@arminco.com wrote:
From: Vahan Yerkanianva...@arminco.com
Subject: Re: [asterisk-users] a2billing for residential voip usage
To: asterisk-users@lists.digium.com
Date: Thursday, June 17, 2010, 1:47 AM
On 6/17/10 12:49 AM, Steve Edwards
wrote:
On Wed, 16 Jun 2010, Landy Landy
please help.
--- On Tue, 6/15/10, Faisal Hanif fai...@vopium.com wrote:
From: Faisal Hanif fai...@vopium.com
Subject: Re: [asterisk-users] a2billing for residential voip usage
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
asterisk-users@lists.digium.com
Date: Tuesday, June
On Wed, 16 Jun 2010, Landy Landy wrote:
I'm unable to place any calls through a2billing. I followed instructions
here: http://trac.asterisk2billing.org/cgi-bin/trac.cgi/wiki/F.A.Q to
DISABLE PIN number request Prompt for some users but, I'm not able to
place any calls.
I created a trunk
On 6/17/10 12:49 AM, Steve Edwards wrote:
On Wed, 16 Jun 2010, Landy Landy wrote:
I'm unable to place any calls through a2billing. I followed instructions
here: http://trac.asterisk2billing.org/cgi-bin/trac.cgi/wiki/F.A.Q to
DISABLE PIN number request Prompt for some users but, I'm not
time for later
review.
Thanks.
--- On Tue, 6/15/10, ram talk2...@gmail.com wrote:
From: ram talk2...@gmail.com
Subject: Re: [asterisk-users] a2billing for residential voip usage
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Date: Tuesday, June 15
.
--- On *Tue, 6/15/10, ram /talk2...@gmail.com/* wrote:
From: ram talk2...@gmail.com
Subject: Re: [asterisk-users] a2billing for residential voip usage
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Date: Tuesday, June 15, 2010, 1:05
And also, what a2b version you are use?
If you are use 1.7 then all config is in DB, if 1.3(4) all config in
a2billing.conf
--
Vardan Harutyunyan,
Senior System Administrator
Enterprise Incubator Foundation
123 Hovsep Emin Street,
Yerevan 0051, Republic of Armenia
Tel: + 374 10 219735
Fax:
@lists.digium.com
Subject: Re: [asterisk-users] a2billing for residential voip usage
Ram.
Thanks for replying. I have searched / googled about it but can't find a
solution to monitor the 4 extensions I have at home. A2billing asks for
the number I want to dial but, I don't need that. I would
: landysacco...@yahoo.com
Sent: Tue, 15 Jun 2010 00:11:51 -0700 (PDT)
To: asterisk-users@lists.digium.com
Subject: Re: [asterisk-users] a2billing for residential voip usage
Ram.
Thanks for replying. I have searched / googled about it but can't find a
solution to monitor the 4 extensions I
:
From: Vardan Harutyunyan hvarda...@gmail.com
Subject: Re: [asterisk-users] a2billing for residential voip usage
To: asterisk-users@lists.digium.com
Date: Tuesday, June 15, 2010, 8:03 AM
look manual, but in any case the
a2billing.conf is in /etc/asterisk/ on
can say, where you have place your
: Tuesday, June 15, 2010 9:53 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] a2billing for residential voip usage
I copied the config to the a2billing.conf in /etc/asterisk folder. I'm still
not able to place any calls yet. Looks like I have to read more
It was already done.
My problem now is that I cant' place any calls through a2billing.
--- On Tue, 6/15/10, Faisal Hanif fai...@vopium.com wrote:
From: Faisal Hanif fai...@vopium.com
Subject: Re: [asterisk-users] a2billing for residential voip usage
To: 'Asterisk Users Mailing List - Non
Hello List.
I just installed a2billing with asterisk 1.6 and got it working. The only
problem is that I'm trying to setup something to manage who's using the most
minutes in the house. I noticed a2billing only works for callin cards setups,
or maybe I didn't configure it correctly for what I
you see lot of documentation on wiki
Google them many success case you see
Ram
On Tue, Jun 15, 2010 at 7:01 AM, Landy Landy landysacco...@yahoo.comwrote:
Hello List.
I just installed a2billing with asterisk 1.6 and got it working. The only
problem is that I'm trying to setup something to
2308
Date: Tue, 18 May 2010 20:47:12 -0700
From: toqee...@gmail.com
To: asterisk-users@lists.digium.com
Subject: [asterisk-users] a2billing DID and Queues
Hi all,
I have configured asterisk and a2billing.for inbound i have also configured
did
Hi all,
I have configured asterisk and a2billing.for inbound i have also configured
did and its forwarded to sip extensions.
But i want to enable queues with inbound numbers(DID).But i could not find a
way to do this in a2billing.
I want enable that if some did comes to asterisk/a2billing it
Hello
I think you can do this using Local Channel
for example I have do so:
queues.conf
[MyQueue]
musicclass = default
ringinuse = yes
strategy=leastrecent
joinempty = yes
timeout=60
retry=5
weight=0
wrapuptime=1
maxlen = 0
announce-frequency = 10
announce-holdtime = no
periodic-announce =
-Original Message-
From: Nathanial Allan nathanial.al...@gmail.com
Date: Tue, 30 Mar 2010 13:08:24
To: asterisk-users@lists.digium.com
Subject: [asterisk-users] a2billing wont pass the number
I am running into an issue with A2Billing. I will explain first of all
that everything
I am running into an issue with A2Billing. I will explain first of all that
everything else works! the system is 90% complete its just this one small
problem I am running into.
So my problem is that when I place a call,
1. I dial my number that I want and A2Billing gets activated
2. it asks
:24
To: asterisk-users@lists.digium.com
Subject: [asterisk-users] a2billing wont pass the number
I am running into an issue with A2Billing. I will explain first of all that
everything else works! the system is 90% complete its just this one small
problem I am running into.
So my problem
and Routing Solutions
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of bilal ghayyad
Sent: 2010 m. vasario 7 d. 01:20
To: asterisk-users@lists.digium.com
Subject: [asterisk-users] A2Billing and other prepaid
[mailto:asterisk-users-boun...@lists.digium.com]
On Behalf Of bilal ghayyad
Sent: 2010 m. vasario 7 d. 01:20
To: asterisk-users@lists.digium.com
Subject: [asterisk-users] A2Billing and other prepaid
Billing like ASTCC,
who is better?
Hi All;
I used A2Billing, basically it is nice and fine
Hi All;
I used A2Billing, basically it is nice and fine, but management possibilities
is not that rich, so a lot of staff are need to be repeated that let the admin
facing a problem of the needed time to do the task.
Anyone advise for another open source prepaid billing that is rich by the
Why not pay for missing feature and contribute them to the project.
It's a very good product.
On 06/02/2010, bilal ghayyad bilmar...@yahoo.com wrote:
Hi All;
I used A2Billing, basically it is nice and fine, but management
possibilities is not that rich, so a lot of staff are need to be
Hi!
I am posting a2billing issue here in asterisk list because some one might have
faced same issue with a2billing callback. My Callback problem has been already
posted on a2billing forum which I am facing on my system. Please have a look on
this thread:
hi
My a2billing adds |HrL automatically to dial string,
I can not find the source of this task,
I need to remove r from all dial strings,
Thanks for your help.
Best
Mani
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection
Pezhman Lali wrote:
hi
My a2billing adds |HrL automatically to dial string,
I can not find the source of this task,
I need to remove r from all dial strings,
Thanks for your help.
Best
Mani
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the
: [asterisk-users] a2billing
hi
My a2billing adds |HrL automatically to dial string,
I can not find the source of this task,
I need to remove r from all dial strings,
Thanks for your help.
Best
Mani
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has
Dear
How can I customize a2billing to have two groups
One have service to play its balance and the second group
do not play the balance.
Regards
*
No employee or agent is authorized to conclude any binding agreement on behalf of
Dear
How can I customize a2billing to have two groups
One have service to play its balance and the second
group do not play the balance.
Regards
*
No employee or agent is authorized to conclude any binding agreement on behalf of
Khaled wrote:
Dear
How can I customize a2billing to have two groups
One have service to play its balance and the second group do not play
the balance.
This is not the a2billing support forum.
Jeremy McNamara
___
--Bandwidth and Colocation
Caros,
I installed the A2Billing - v1.2.2 with Asterisk 1.2.10. All works ok, but when
I try callout got a message saying the number in not available.
Can you help with a step-by-step to make a card autenticate and dial a number?
Thank you
Luc Moreira
Mais VoIP
-- Accepting
I am using a2billing as billing system on tixbox but I have
a problem since the user call the destination number ,the ivr tell him about
him amount and ask him to enter the destination number ,my question is how can
I let the user call the destination directly .
Regards
Hi,you check your a2billing.conf file:; Please enter here the file you want to play when we prompt the calling party to enter his destination number; file_conf_enter_destination = prepaid-enter-number-u-calling-1-or-011
file_conf_enter_destination = prepaid-enter-destI think this file should help
Regards!
During the use of areski a2billing software
I'm getting same problem all the time.
Actually, after 15 minutes ofspeaking
to someone over calling card, connection brakes.
Installation was as smooth as it could be
so I don't think I made same kind of a mess in that domain. This is
Hello list,
Is there any way to use a2billing without the IVR for the sip/iax users. (authentication is done by the user id and pass as user registers with asterisk).
I want to dial the destination number to the asterisk. for example:
user dials,
exten =_011.,1,DeadAGI(a2billing)
system will
Thanks for this information!
Lan
- Original Message -
From:
ram
To: Asterisk Users Mailing List -
Non-Commercial Discussion
Sent: Friday, December 16, 2005 8:50
PM
Subject: Re: [Asterisk-Users] A2billing
Trunk
Hi
check this URL will help you
Excuse me Chris!
Forgive me that I don't understand what you are really mean?
I would very appreciated if you let me know some think about the
rules,
and
how we would get help from people and how to find some previous
information
that has been posted from someelse before that we may
Dear helpers and supporters!
I have been playing with the A2billing for a week, but I still get stuck on
creating a working trunk to terminate the call. Is any one show me how to
setup a trunk in A2billing or pointing me to some where that I can find out
the information.
I would very
On 12/16/05, MapsAir [EMAIL PROTECTED] wrote:
Dear helpers and supporters!
I have been playing with the A2billing for a week, but I still get stuck on
creating a working trunk to terminate the call. Is any one show me how to
setup a trunk in A2billing or pointing me to some where that I can
Hi
check this URL will help you for this
since this list only asterisk.. not [EMAIL PROTECTED]
http://sourceforge.net/forum/forum.php?thread_id=1398290forum_id=420324
ram
On 12/17/05, snacktime [EMAIL PROTECTED] wrote:
On 12/16/05, MapsAir [EMAIL PROTECTED] wrote: Dear helpers and supporters!
@lists.digium.com
Sent: Friday, December 16, 2005 4:54 PM
Subject: Re: [Asterisk-Users] A2billing Trunk
On 12/16/05, MapsAir [EMAIL PROTECTED] wrote:
Dear helpers and supporters!
I have been playing with the A2billing for a week, but I still get stuck
on
creating a working trunk to terminate the call
Lan wrote:
Forgive me that I don't understand what you are really mean?
He means that this is the list for Asterisk Support - [EMAIL PROTECTED] is a
completely different product. (Asterisk is simply the PBX software,
where as [EMAIL PROTECTED] is a complete distro that just happens to include
I have setup a2billing to be used as more
of a billing software.
I have made a card for each of my
customers and the call through and get authenticated with callerID and then the
call is placed using dnid.
This is working great.
The problem that I just ralized is that
when I get a call
Anyone know how to do it?
Sam
___
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
HI,
I have been playing around with the A2billing agi for a few days( I
really think its a great application) and trying to understand its
working. As far as I have understood, the only debugging mechanism is
going through the logs it generates.
It would be really cool if I can run the agi in
This is so simple, you are going to kick yourself. Type agi debug in
the console.
Thanks,
Steve
-Original Message-
From: Danish Samad [mailto:[EMAIL PROTECTED]
Sent: Monday, November 28, 2005 3:52 AM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] a2billing / php agi
:
This is so simple, you are going to kick yourself.Type agi debug inthe console.Thanks,Steve -Original Message- From: Danish Samad [mailto:
[EMAIL PROTECTED]] Sent: Monday, November 28, 2005 3:52 AM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] a2billing / php agi debugging
HI, I have
HI,
I have been playing around with the A2billing agi for a few days( I
really think its a great application) and trying to understand its
working. As far as I have understood, the only debugging mechanism is
going through the logs it generates.
It would be really cool if I can run the agi in
Please move _all_ discussion regarding A2Billing (and the mechanics of
using any billing system unless the discussion is explicitly
Asterisk-related) to some other mailing list; this mailing list not a
support forum for add-on packages.
Thanks!
___
Om the subject of A2Billing, the only problem I have is caller ID.
1. I need to add the same caller id to more than 1 card.
2. It dosnt send out the assigned caller id.
When i make a call through my * box without using CC, caller ID works fine.
Any suggestions?
thanks
john
On Sat, 19 Nov
, 2005 1:21 PM
Subject: Re: [Asterisk-Users] A2billing warnings with new Asterisk 1.2
Om the subject of A2Billing, the only problem I have is caller ID.
1. I need to add the same caller id to more than 1 card.
2. It dosnt send out the assigned caller id.
When i make a call through my * box without
yes! it works very well now, I used this to re-compile php with pcntl:
./configure --with-apxs2=/usr/local/apache2/bin/apxs --with-mysql
--with-mysql-sock=/tmp --with-pgsql=/usr/local/pgsql/ --with-zlib
--with-gd --enable-pcntl
thank you again Vahan
rafael
On 11/19/05, Vahan Yerkanian [EMAIL
Hi
I have this 3 warnings running a2billling with asterisk new version:
a2billing.php|2:
-- AGI Script Executing Application: (SetLanguage) Options: (en)
Nov 18 12:06:19 WARNING[17440]: pbx.c:5435 pbx_builtin_setlanguage:
SetLanguage is deprecated, please use Set(LANGUAGE()=language) instead.
Rafael R. GV wrote:
Hi
I have this 3 warnings running a2billling with asterisk new version:
a2billing.php|2:
-- AGI Script Executing Application: (SetLanguage) Options: (en)
Nov 18 12:06:19 WARNING[17440]: pbx.c:5435 pbx_builtin_setlanguage:
SetLanguage is deprecated, please use
does anybody know what i am doing wrong? help please
gzip: stdin: unexpected end of file
tar: Read 8572 bytes from Open_A2Billing_version_Raccoon.tar.gz
tar: Unexpected EOF in archive
tar: Unexpected EOF in archive
tar: Error is not recoverable: exiting now
asterisk:/usr/src/a2billing#
thanks
John Fraser wrote:
does anybody know what i am doing wrong? help please
gzip: stdin: unexpected end of file
tar: Read 8572 bytes from Open_A2Billing_version_Raccoon.tar.gz
tar: Unexpected EOF in archive
tar: Unexpected EOF in archive
tar: Error is not recoverable: exiting now
Thank you for the reply. I downloaded again and ran the command
tar -xzvf Open_A2Billing_version_Raccoon.tar.gz
but still getting the same error. may I ask the url you used for the
download please?
thank you
john fraser
asterisk:/usr/src/a2billing# wget
figured it out. thanks anyway.
the first dload had stopped at 12 percent. second dload was named
Open_A2Billing_version_Raccoon.tar.gz.1
ran the command
tar -xzvf Open_A2Billing_version_Raccoon.tar.gz.1
everything good now at least up to this point.
hope this helps the other non linux people
Hello
1.- I am testing a2billing in a SER-Asterisk implementation but using
Mysql versions 4.1.15 and 5.0.15 because I want to integrate its cdr
with some tables from Ser database, the a2billing-mysql-schema does not
work properly in mysql-5 and in 4.1.15 works well but now I found this
issue
Rafael R. GV wrote:
Hello
1.- I am testing a2billing in a SER-Asterisk implementation but using
Mysql versions 4.1.15 and 5.0.15 because I want to integrate its cdr
with some tables from Ser database, the a2billing-mysql-schema does not
work properly in mysql-5 and in 4.1.15 works well but
Rafael - To generate PDF documents, you may need to install Adobe PDF
Writer, or the full version of Acrobat that includes the reader and
writer. Just a guess.
Cory Andrews
Senior Partner
+++
VOIPSupply.com
454 Sonwil Drive
Buffalo, NY 14225
+++
voice - 716.630.1555 X22
email
On Tue, 2005-11-15 at 19:01 -0500, Cory Andrews wrote:
Rafael - To generate PDF documents, you may need to install Adobe PDF
Writer, or the full version of Acrobat that includes the reader and
writer. Just a guess.
Wouldnt an open source solution that is basically just libraries work
better
issue related to cdr´s: I can see cdr records in 'call' table from mysql console but they don't appear in a2bill web interface, I only can see
records of current date ...not sure if its a mysql 4.x incompatibility so now I´ve installed postgres to verify, let me now if someone has same
On 11/16/05, Rafael R. GV [EMAIL PROTECTED] wrote:
issue related to cdr´s: I can see cdr records in 'call' table from mysql
console but they don't appear in a2bill web interface, I only can see
records of current date ...not sure if its a mysql 4.x incompatibility so now I´ve installed
Rafael R. GV wrote:
PS: mysql-schema does not work properly in mysql 5.0.x because only one
timestamp with default now() in a table its allowed as you told me and
also I´ve found other issue related to auto_increment value:
ERROR 1064 (42000) at line 87: You have an error in your SQL syntax;
Rafael R. GV a écrit :
[...]
2.- Change value FG_TABLE_NAME=call t1 for FG_TABLE_NAME=calls
t1 in following files:
A2Billing_UI/Public/call-log-customers.php
A2Billing_UI/Public/invoices.php
A2BCustomer_UI/balance.php
A2BCustomer_UI/invoices.php
You forgot:
thanks Vahan
you are right, I have changed 'call t1' for 'calls t1' in balance.php
and invoices.php files and then tried to create a new table named
'calls' but mysql 5 has changed syntax for 'TIMESTAMP DEFAULT' and this
is the error:
mysql CREATE TABLE calls (
- id BIGINT NOT NULL
Rafael R. GV wrote:
thanks Vahan
you are right, I have changed 'call t1' for 'calls t1' in balance.php
and invoices.php files and then tried to create a new table named
'calls' but mysql 5 has changed syntax for 'TIMESTAMP DEFAULT' and this
is the error:
- starttime TIMESTAMP
Thank you
this is what I made to solve it:
1.- create table 'calls' using: starttime TIMESTAMP DEFAULT
now() NOT NULL, (it can be starttime TIMESTAMP DEFAULT
CURRENT_TIMESTAMP NOT NULL, too) :
CREATE TABLE calls (
id BIGINT NOT NULL AUTO_INCREMENT,
sessionid CHAR(40) NOT NULL,
uniqueid
Hi
I was using a2billing with mysql-4.1.12 and php-5.0.4 very successfully
(thanks to areski for this great project and its invaluable assistance
to solve some issues in my last installation...) now I´ve upgraded
mysql to last release 5.0.15 and, without changes in 'mya2billing'
database I am
Rafael R. GV wrote:
Hi
I was using a2billing with mysql-4.1.12 and php-5.0.4 very successfully
(thanks to areski for this great project and its invaluable assistance
to solve some issues in my last installation...) now I´ve upgraded mysql
to last release 5.0.15 and, without changes in
Hi Seong,
The creditlimit mean the amount of credit you authorize the CardHolder to go
in negative. You should have try ;-)
Rgds,
/Areski
On 11/11/05, Ah khng [EMAIL PROTECTED] wrote:
Hi all,
I'm glad to hear that areskicc v3 have been released. But i have a
problem to use a2billing as
Bukoka Budoka a écrit :
Hi,
i installed A2billing according to instructions. GUI works fine, i
entered a new card and i put the appopriate context in my
extensions.conf:
[callingcard]
exten = _123,1,Answer
exten = _123,2,Wait,2
exten = _123,3,DeadAGI,a2billing.php
exten = _123,4,Wait,2
1 - 100 of 125 matches
Mail list logo