[asterisk-users] allo.com gsm card with AsteriskNOW
Dear all, I'm searching someone who already installed allo.com gsm card with AsteriskNOW. I installed the hardware in my new server, but when running dahdi_genconf always have the no span message. I I tried to install the driver according to allo.com doc, but it seems not up to date, and maybe done more specifically for an appliance.. [root@localhost ~]# dahdi_genconf Empty configuration -- no spans Empty configuration -- no spans Empty configuration -- no spans Thanks for help Nico David Duffett wrote : Step 1 would be an 'lspci' on the Linux command line to see if the Linux box recognises the card Step 2 would be to ensure that your DAHDI version is new enough to work with the card Yes , the card is present : 04:00.0 Bridge: PLX Technology, Inc. Device d44e (rev 01) Jg wrote : Don't they have a kernel module that communicates with the card on one and with DAHDI on the other side? The first steps are probably to check with lspci whether the card is detected and then make sure the allo module is loaded. They have a package http://www.allo.com/firmware/gsm-card/chan_allogsm-1.1.2_P2.tar.gz with an installer inside (install.sh), but it is turned as full installer : - download and install dahdi-linux-complete-2.5.0+2.5.0.tar.gz - seems makes some compilation for the driver - finishes by proposing to install asterisk As I installed AsteriskNOW before, it makes no sense to install Asterisk again, I just need to install the driver In the package I can found src folders, but I don't know how to use them to build the module manually. The installer seems building allog4c.ko file but it doesn't works installed by this script I guess it is just a basic operation to know how to compile the module and load it every time the system boots Then how to configure the channels chan_allogsm .. Thanks for help :-) Nico -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] allo.com gsm card with AsteriskNOW
On Sun, 19 Oct 2014 08:20:40 + Nicolas Pham Van Huyen nico...@phamvanhuyen.com wrote: Dear all, I'm searching someone who already installed allo.com gsm card with AsteriskNOW. I installed the hardware in my new server, but when running dahdi_genconf always have the no span message. I I tried to install the driver according to allo.com doc, but it seems not up to date, and maybe done more specifically for an appliance.. [root@localhost ~]# dahdi_genconf Empty configuration -- no spans Empty configuration -- no spans Empty configuration -- no spans Thanks for help Nico David Duffett wrote : Step 1 would be an 'lspci' on the Linux command line to see if the Linux box recognises the card Step 2 would be to ensure that your DAHDI version is new enough to work with the card Yes , the card is present : 04:00.0 Bridge: PLX Technology, Inc. Device d44e (rev 01) Jg wrote : Don't they have a kernel module that communicates with the card on one and with DAHDI on the other side? The first steps are probably to check with lspci whether the card is detected and then make sure the allo module is loaded. It's also important to check for any variables needed to pass to the module at load time: 'modinfo module_name' should return any available options. They have a package http://www.allo.com/firmware/gsm-card/chan_allogsm-1.1.2_P2.tar.gz with an installer inside (install.sh), but it is turned as full installer : - download and install dahdi-linux-complete-2.5.0+2.5.0.tar.gz - seems makes some compilation for the driver - finishes by proposing to install asterisk As I installed AsteriskNOW before, it makes no sense to install Asterisk again, I just need to install the driver In the package I can found src folders, but I don't know how to use them to build the module manually. The installer seems building allog4c.ko file but it doesn't works installed by this script I guess it is just a basic operation to know how to compile the module and load it every time the system boots Then how to configure the channels chan_allogsm .. You'll need to install the basics like kernel headers and build essentials to compile any modules for your running kernel. Once properly compiled and loaded you should see lspci list which kernel modules are used by others. Thanks for help :-) Nico Good luck HTH! ;) Brian -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] allo.com gsm card with AsteriskNOW
Dear all, I'm searching someone who already installed allo.com gsm card with Asterisk NOW. I installed the hardware in my new server, but when runing dahdi_genconf I always have the no span message. I tried to install the driver according to allo.com doc, but it seems not up to date, and maybe done more specificly for an appliance.. [root@localhost ~]# dahdi_genconf Empty configuration -- no spans Empty configuration -- no spans Empty configuration -- no spans Thanks for help Nico -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] allo.com gsm card with AsteriskNOW
On 15 October 2014 11:59, Nicolas Pham Van Huyen nico...@phamvanhuyen.com wrote: Dear all, I'm searching someone who already installed allo.com gsm card with Asterisk NOW. I installed the hardware in my new server, but when runing dahdi_genconf I always have the no span message. I tried to install the driver according to allo.com doc, but it seems not up to date, and maybe done more specificly for an appliance.. [root@localhost ~]# dahdi_genconf Empty configuration -- no spans Empty configuration -- no spans Empty configuration -- no spans Thanks for help Nico -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users Step 1 would be an 'lspci' on the Linux command line to see if the Linux box recognises the card Step 2 would be to ensure that your DAHDI version is new enough to work with the card -- [image: Digium logo] *David Duffett* Digium, Inc. · Director, Worldwide Asterisk Community 6 Landscape Close, Weston on the Green · Bicester, Oxfordshire OX25 3SX · UK direct/fax: +1 256 428 6119 · mobile: +44 7722 442236 twitter: dduffett · linkedin: www.linkedin.com/in/davidduffett Check us out at: http://digium.com · http://asterisk.org http://www.asterisk.org/ -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] allo.com gsm card with AsteriskNOW
Don't they have a kernel module that communicates with the card on one and with DAHDI on the other side? The first steps are probably to check with lspci whether the card is detected and then make sure the allo module is loaded. jg -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
