Hi Eric,
Am Sonntag, den 12.10.2008, 18:06 -0700 schrieb Eric Fort:
resolve.conf and dns is working. The problem persists.
/var/log/asterisk/messages shows a few notices and warnings on
res_smdi.c, res_musiconhold.c, and usbradio.c. when I disable loading
of these in modules.conf asterisk
On Mon, Oct 13, 2008 at 06:51:47PM +0200, Karsten Wemheuer wrote:
Hi Eric,
Am Sonntag, den 12.10.2008, 18:06 -0700 schrieb Eric Fort:
resolve.conf and dns is working. The problem persists.
/var/log/asterisk/messages shows a few notices and warnings on
res_smdi.c, res_musiconhold.c,
I've seen something like that (in your next post you show 20-some
modules, a stock install will be 100 modules) when using the
openSUSE distribution Asterisk package along with asterisk-addons
package. What happens is it gets stuck on some module that is not
configured I think one of the ones
On Oct 12, 2008, at 6:31 AM, Eric Fort wrote:
autoload is enabled but all the modules are not loaded. Why would
this be? what should I look at? The cli output and modules.conf
are below.
Eric
modules.conf:
;
; Asterisk configuration file
;
; Module Loader configuration file
;
resolve.conf and dns is working. The problem persists.
/var/log/asterisk/messages shows a few notices and warnings on res_smdi.c,
res_musiconhold.c, and usbradio.c. when I disable loading of these in
modules.conf asterisk crashes on load.
Eric
On Sun, Oct 12, 2008 at 1:10 AM, Michiel van Baak
I just loaded a new asterisk install (1.4.19) and found that the sip, iax,
and extentions commands are missing from the cli and are not listed in help
either? Any idea what could have happened or where these commands may have
gone?
Thanks,
Eric
___
--
On Sat, Oct 11, 2008 at 08:17:09PM -0700, Eric Fort wrote:
I just loaded a new asterisk install (1.4.19) and found that the sip, iax,
and extentions commands are missing from the cli and are not listed in help
either? Any idea what could have happened or where these commands may have
gone?
autoload is enabled but all the modules are not loaded. Why would this be?
what should I look at? The cli output and modules.conf are below.
Eric
modules.conf:
;
; Asterisk configuration file
;
; Module Loader configuration file
;
[modules]
autoload=yes
noload=chan_oss.so
noload=chan_alsa.so