Hmm... Ok, I tried that but encode.h and decode.h were not found...
On Wed, Sep 10, 2008 at 11:23 AM, Thomas Kenyon
[EMAIL PROTECTED] wrote:
Edgar Guadamuz wrote:
I notice that I have only format_ilbc.so but not codec_ilbc.so... is
it due to the compilation or there is some way to create
Done!
I had to do
# cd /usr/src/asterisk
# ./contrib/scripts/get_ilbc.sh
and the compilation was successful
On Thu, Sep 11, 2008 at 11:55 AM, Edgar Guadamuz [EMAIL PROTECTED] wrote:
Hmm... Ok, I tried that but encode.h and decode.h were not found...
On Wed, Sep 10, 2008 at 11:23 AM,
Edgar Guadamuz wrote:
I notice that I have only format_ilbc.so but not codec_ilbc.so... is
it due to the compilation or there is some way to create the module?
That's the format interpreter, for the codec you need to select it in
make menuselect befor ecompiling asterisk (subject to
I notice that I have only format_ilbc.so but not codec_ilbc.so... is
it due to the compilation or there is some way to create the module?
On Sun, Sep 7, 2008 at 11:14 PM, Stelios Koroneos
[EMAIL PROTECTED] wrote:
Make sure there is no noload = codec_ilbc.so in the module folder
You can also
- Original Message -
From: Edgar Guadamuz [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Tuesday, September 9, 2008 2:18:28 PM GMT -05:00 Columbia
Subject: Re: [asterisk-users] iLBC and G729 codecs
I notice that I have
Hi all,
In my modules.conf I have the autoload=yes, and there is one
codec_iLBC.so module in the modules folder.
However, when I do show translation, I see no translation to/from iLBC
nor G.729, and I'm not able to establish call to channels using these
codecs.
I read that there are some
I may be wrong about this, but * understads that these codecs exsist, but
without a codec_XXX.so, it cant do translation on the codec.
In this case, * can do pass throught (eg: g729 - g729) but cannot do
translation (eg: g729 - gsm).
You need to install the codec before you can do a translation.
Make sure there is no noload = codec_ilbc.so in the module folder
You can also try to manually load the codec from the cli try load
codec_ilbc.so
For g729 you need to buy a licence from Digium.
--
Stelios S. Koroneos
Digital OPSiS - Embedded Intelligence
Tel +30 210 9858296 Ext 100
Fax +30
