Re: [asterisk-users] sangoma wanpipe install error
On Sun, Feb 13, 2011 at 9:25 PM, Roi Stork wrote: > Here's the messages log. There's a line that says ERROR: Unsupported DS E1 > CHIP (00:00) > > That's pretty bad. Could you post the output of "wanrouter hwprobe verbose" ? Moises Silva Senior Software Engineer Sangoma Technologies Inc. | 100 Renfrew Drive, Suite 100, Markham ON L3R 9R6 Canada t. 1 905 474 1990 x128 | e. m...@sangoma.com -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] sangoma wanpipe install error
Here's the messages log. There's a line that says ERROR: Unsupported DS E1 CHIP (00:00) Feb 14 10:09:19 server14 kernel: [6011515.237242] dahdi: Telephony Interface Registered on major 196 Feb 14 10:09:19 server14 kernel: [6011515.237246] dahdi: Version: 2.4.0 Feb 14 10:09:19 server14 kernel: [6011515.244707] WANPIPE(tm) Hardware Support Module 3.5.18.0 (c) 1994-2010 Sangoma Technologies Inc Feb 14 10:09:19 server14 kernel: [6011515.245010] usbcore: registered new interface driver sdlausb Feb 14 10:09:19 server14 kernel: [6011515.251320] WANPIPE(tm) Interface Support Module 3.5.18.0 (c) 1994-2010 Sangoma Technologies Inc Feb 14 10:09:19 server14 kernel: [6011515.262373] WANPIPE(tm) Multi-Protocol WAN Driver Module 3.5.18.0 (c) 1994-2010 Sangoma Technologies Inc Feb 14 10:09:19 server14 kernel: [6011515.262376] wanpipe: Probing for WANPIPE hardware. Feb 14 10:09:19 server14 kernel: [6011515.264214] wanpipe: AFT-A104-SH PCIe T1/E1 card found (HDLC (DS) rev.37), cpu(s) 1, line(s) 4, bus #4, slot #4, irq #16 Feb 14 10:09:19 server14 kernel: [6011515.264228] wanpipe: Allocating maximum 4 devices: wanpipe1 - wanpipe4. Feb 14 10:09:19 server14 kernel: [6011515.264775] WANPIPE: TDM Codecs Initialized Feb 14 10:09:19 server14 kernel: [6011515.271478] WANPIPE(tm) Socket API Module 3.5.18.0 (c) 1994-2010 Sangoma Technologies Inc Feb 14 10:09:19 server14 kernel: [6011515.271481] NET: Registered protocol family 25 Feb 14 10:09:19 server14 kernel: [6011515.283341] WANPIPE(tm) WANEC Layer 3.5.18.0 (c) 1995-2006 Sangoma Technologies Inc. Feb 14 10:09:19 server14 kernel: [6011515.283344] wanec_create_dev: Registering Wanpipe ECDEV Device! Feb 14 10:10:32 server14 kernel: [6011588.876265] wanec_remove_dev: Unregistering Wanpipe ECDEV Device! Feb 14 10:10:32 server14 kernel: [6011588.876346] WANEC Layer: Unloaded Feb 14 10:10:32 server14 kernel: [6011588.879218] af_wanpipe: Unregistering Wanpipe API Socket Module Feb 14 10:10:32 server14 kernel: [6011588.904829] NET: Unregistered protocol family 25 Feb 14 10:10:32 server14 kernel: [6011588.907606] WANPIPE: TDM Codecs unloaded. Feb 14 10:10:32 server14 kernel: [6011588.907609] Feb 14 10:10:32 server14 kernel: [6011588.907610] wanpipe: WANPIPE Modules Unloaded. Feb 14 10:10:32 server14 kernel: [6011588.912729] usbcore: deregistering interface driver sdlausb Feb 14 10:10:32 server14 kernel: [6011588.912756] Logger TASKQ Not Running Feb 14 10:10:32 server14 kernel: [6011588.914895] dahdi: Telephony Interface Unloaded Feb 14 10:11:47 server14 kernel: [6011663.492120] dahdi: Telephony Interface Registered on major 196 Feb 14 10:11:47 server14 kernel: [6011663.492123] dahdi: Version: 2.4.0 Feb 14 10:11:47 server14 kernel: [6011663.500161] WANPIPE(tm) Hardware Support Module 3.5.18.0 (c) 1994-2010 Sangoma Technologies Inc Feb 14 10:11:47 server14 kernel: [6011663.500557] usbcore: registered new interface driver sdlausb Feb 14 10:11:47 server14 kernel: [6011663.505314] WANPIPE(tm) Interface Support Module 3.5.18.0 (c) 1994-2010 Sangoma Technologies Inc Feb 14 10:11:47 server14 kernel: [6011663.513738] WANPIPE(tm) Multi-Protocol WAN Driver Module 3.5.18.0 (c) 1994-2010 Sangoma Technologies Inc Feb 14 10:11:47 server14 kernel: [6011663.513741] wanpipe: Probing for WANPIPE hardware. Feb 14 10:11:47 server14 kernel: [6011663.514985] wanpipe: AFT-A104-SH PCIe T1/E1 card found (HDLC (DS) rev.37), cpu(s) 1, line(s) 4, bus #4, slot #4, irq #16 Feb 14 10:11:47 server14 kernel: [6011663.514996] wanpipe: Allocating maximum 4 devices: wanpipe1 - wanpipe4. Feb 14 10:11:47 server14 kernel: [6011663.515447] WANPIPE: TDM Codecs Initialized Feb 14 10:11:47 server14 kernel: [6011663.522007] WANPIPE(tm) Socket API Module 3.5.18.0 (c) 1994-2010 Sangoma Technologies Inc Feb 14 10:11:47 server14 kernel: [6011663.522011] NET: Registered protocol family 25 Feb 14 10:11:47 server14 kernel: [6011663.534362] WANPIPE(tm) WANEC Layer 3.5.18.0 (c) 1995-2006 Sangoma Technologies Inc. Feb 14 10:11:47 server14 kernel: [6011663.534366] wanec_create_dev: Registering Wanpipe ECDEV Device! Feb 14 10:11:47 server14 kernel: [6011663.543452] wanpipe1: Starting WAN Setup Feb 14 10:11:47 server14 kernel: [6011663.543455] Feb 14 10:11:47 server14 kernel: [6011663.543457] Processing WAN device wanpipe1... Feb 14 10:11:47 server14 kernel: [6011663.543461] wanpipe1: Locating: A101/1D/A102/2D/4/4D/8 card, CPU A, PciBus=4, PciSlot=4 Feb 14 10:11:47 server14 kernel: [6011663.543467] wanpipe1: Found: A101/1D/A102/2D/4/4D/8 card, CPU A, PciBus=4, PciSlot=4, Port=0 Feb 14 10:11:47 server14 kernel: [6011663.543718] wanpipe1: AFT PCI memory at 0xFAFE Feb 14 10:11:47 server14 kernel: [6011663.543721] wanpipe1: IRQ 16 allocated to the AFT PCI card Feb 14 10:11:47 server14 kernel: [6011663.543733] wanpipe1: Starting AFT 2/4/8 Hardware Init. Feb 14 10:11:47 server14 kernel: [6011663.543741] wanpipe1: Enabling front end link monitor Feb 14 10:11:47 server14 kernel: [6011663.543745] wanpipe1: Global Chip Configuration: used=1 used_type
Re: [asterisk-users] sangoma wanpipe install error
As the error suggest, try checking /var/log/messages for possible hints on what went wrong. Make sure you configured the device with wancfg_dahdi script first. Moises Silva Senior Software Engineer Sangoma Technologies Inc. | 100 Renfrew Drive, Suite 100, Markham ON L3R 9R6 Canada t. 1 905 474 1990 x128 | e. m...@sangoma.com On Fri, Feb 11, 2011 at 1:47 AM, Roi Stork wrote: > Trying to install wanpipe 3.5.18. > > No errors during compile. But when I reach the point where wanpipe and > dahdi_cfg is started, I encountered an error. > > Starting WAN Router... > Loading WAN drivers: wanpipe done. > Starting up device: wanpipe1 > > >wanconfig: WAN device wanpipe1 driver load failed !! > : ioctl(wanpipe1,ROUTER_SETUP) failed: > : 22 - Invalid argument > > >Wanpipe driver did not load properly >Please check /var/log/wanrouter and >/var/log/messages for errors > > Configuring interfaces: w1g1 w1g1: ERROR while getting interface flags: No > such device > > done. > /etc/wanpipe/scripts/start: 7: Syntax error: Bad for loop variable > > DAHDI_SPANCONFIG failed on span 1: No such device > or address (6) > > Dont know why I still keep getting a 'No such device' error even if the > device was detected (Sangoma a104de, setup asked to configure/skip the 4 > ports) before the error happened. > > -- > _ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] sangoma wanpipe install error
Try to check your kernel version as per the wiki.sangoma.com website. I hope that will solve your issue. On Fri, Feb 11, 2011 at 12:17 PM, Roi Stork wrote: > Trying to install wanpipe 3.5.18. > > No errors during compile. But when I reach the point where wanpipe and > dahdi_cfg is started, I encountered an error. > > Starting WAN Router... > Loading WAN drivers: wanpipe done. > Starting up device: wanpipe1 > > >wanconfig: WAN device wanpipe1 driver load failed !! > : ioctl(wanpipe1,ROUTER_SETUP) failed: > : 22 - Invalid argument > > >Wanpipe driver did not load properly >Please check /var/log/wanrouter and >/var/log/messages for errors > > Configuring interfaces: w1g1 w1g1: ERROR while getting interface flags: No > such device > > done. > /etc/wanpipe/scripts/start: 7: Syntax error: Bad for loop variable > > DAHDI_SPANCONFIG failed on span 1: No such device > or address (6) > > Dont know why I still keep getting a 'No such device' error even if the > device was detected (Sangoma a104de, setup asked to configure/skip the 4 > ports) before the error happened. > > -- > _ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- Thank you with regards, Gopalakrishnan A.N. VoIP call - sip:sai...@gtalk2voip.com -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] sangoma wanpipe install error
Trying to install wanpipe 3.5.18. No errors during compile. But when I reach the point where wanpipe and dahdi_cfg is started, I encountered an error. Starting WAN Router... Loading WAN drivers: wanpipe done. Starting up device: wanpipe1 wanconfig: WAN device wanpipe1 driver load failed !! : ioctl(wanpipe1,ROUTER_SETUP) failed: : 22 - Invalid argument Wanpipe driver did not load properly Please check /var/log/wanrouter and /var/log/messages for errors Configuring interfaces: w1g1 w1g1: ERROR while getting interface flags: No such device done. /etc/wanpipe/scripts/start: 7: Syntax error: Bad for loop variable DAHDI_SPANCONFIG failed on span 1: No such device or address (6) Dont know why I still keep getting a 'No such device' error even if the device was detected (Sangoma a104de, setup asked to configure/skip the 4 ports) before the error happened. -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
