On Fri, Apr 24, 2009 at 12:09:50PM +0200, Wolfgang Pichler wrote:
hi all,
we do have some troubles with zaptel timing source - we have a setup
with 3 telco PRI lines, connected to asterisk digium card 0 - asterisk
does some handling - calls are leaving on digium card 1 - going to a
siemens
hi all,
we do have some troubles with zaptel timing source - we have a setup
with 3 telco PRI lines, connected to asterisk digium card 0 - asterisk
does some handling - calls are leaving on digium card 1 - going to a
siemens hipath - there is some call handling - some of the calls then
are going
Hello,
I would suggest that you first methodically try every possible
combination of zaptel.conf timing settings(each change follwed by a
hard reboot of the Asterisk server) to see if there is a magic
combination of settings that will work. I don't know if you have the
time for that, or if it
Hello,
the issue does occour some seconds after connection the line - but the
hard reboot takes some time...
The cards are TE420 (4th Gen) - version c01a016a.
Zaptel ist 1.4.12.1
The firmware on digium cards can not get flashed - or i am wrong (i have
never heard about that)
regards,
Wolfgang
