I need your help all with. What is needed to get the CCM and
Asterisk to exchange calls over H323? I mean which config files needs to be
updated. I now have oh323.conf shown and ready.
Thanks
Walid
Subject: Re:
[Asterisk-Users] Asterisk and Cisco CallManager Integration From: Vamsi Pottangi
On Sat, Jun 25, 2005 at 07:58:24PM -0500, Greg Oliver wrote:
That works well. You may also want to make sure your compatibility
matrix between Asterisk/OH323/PWLIB/GNUGK is right - incompatibilities
cause more issues than I care to talk about. The GNUGk web site has the
best matrix to
http://www.gnugk.org/compiling-gnugk.html
Also, the reqs for the included 323 channel and gnugk differ on
versions. I have unreliably gotten them both to run on the same box
with 100% reliability. Outbound calls transcoded from SIP - 323 -
Gnugk - CCM - MGCP - PRI get dropped from DRQ after 2-4
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Greg Oliver
Sent: Sunday, June 26, 2005 2:58 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Asterisk and Cisco CallManager Integration
We have successfully connect * .9x
-Commercial Discussion
Subject: Re: [Asterisk-Users] Asterisk and Cisco CallManager Integration
We have successfully connect * .9x 1.0.x with CCM 3.3.x and up using both
gatekeeper and no gatekeeper.. Using SIP usually with CCM 4.0 and up..
With CCM 3.3.x, there is a limitation where
Use a gatekeeper and have both boxes register with the gatekeeper. That
way you can specify what numbers go where. From everything I have
tested, * will NOT register with CCM. When I added in a gatekeeper and
had both sides register with it, everything works.
Walid Azab wrote:
Hello,
I
We have successfully connect * .9x 1.0.x with CCM 3.3.x and up using
both gatekeeper and no gatekeeper.. Using SIP usually with CCM 4.0 and
up.. With CCM 3.3.x, there is a limitation where the gateway H323 in
your case cannot use IP addresses, so the Asterisk box has to have
correct DNS entries
I have Callmanager 3.3(5) linked with Asterisk using H323.
Note that even though I'm using Stable Asterisk from 12/06/05, I am
using H323 from CVS Head 30/09/04. I found that later versions would
have one-way audio problems.
I've also had it working with OH323 but noticed higher audio latency
