Re: [Asterisk-Users] ISDN Protocol Unknom Error with Junghanns OctoBRI
Hello Henk, 1013 was the number that I tried to call. In France, it's the number to call the operator France Telecom. I've also tried to call another number without success. I will make some tests this evening with the answers that I received via this mailing-list. Thank you. Henk Dick a écrit : I think that you are sending an outgoing caller id that is not part of the DID range. Most operators do not allow this. ISDN/Telephony Numbering Plan (E.164/E.163) (1) '1013' ] Are you using caller id 1013 ? Change it to a number that is part of your trunks. Henk -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sébastien Mortier Sent: maandag 20 maart 2006 11:52 To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] ISDN Protocol Unknom Error with Junghanns OctoBRI Hello, I recently bought a Junghanns Octobri Card. I have some problems with this card to make outbound calls but I can receive calls. I have 3 lines to PSTN and 3 lines to my existing PBX FRANCE TELECOM -- OctoBRI -- Asterisk 1.2.4-BRIstuffed-0.3.0-PRE-1h -- OctoBRI -- PABX e-Generis ISDN Phones | | SIP Phones France Telecom -- SIP Phones : Works France Telecom -- ISDN Phones : Works SIP Phones -- ISDN Phones : Works ISDN Phones - SIP Phones : Works SIP Phones -- France Telecom : DOESN'T WORK ISDN Phones - France Telecom : DOESN'T WORK Here are some characteristics of my Asterisk Setup OS Linux Gentoo 2.6.15-r1 zaptel 1.2.3 libpri 1.2.2 asterisk 1.2.4-BRIstuffed-0.3.0-PRE-1h ISDN Lines : EuroISDN not EuroISDN+ Junghanns OctoBRI PCI ISDN Card S/T 1+8 - S/T 2+7 : TE Mode S/T 3+6 - S/T 4+5 : NT Mode modprobe qozap ports=60 zaptel.conf --- loadzone=fr defaultzone=fr # qozap span definitions # most of the values should be bogus because we are not really zaptel span=1,1,3,ccs,ami span=2,0,3,ccs,ami span=3,0,3,ccs,ami span=4,0,3,ccs,ami span=5,1,3,ccs,ami span=6,0,3,ccs,ami span=7,0,3,ccs,ami span=8,0,3,ccs,ami bchan=1,2 dchan=3 bchan=4,5 dchan=6 bchan=7,8 dchan=9 bchan=10,11 dchan=12 bchan=13,14 dchan=15 bchan=16,17 dchan=18 bchan=19,20 dchan=21 bchan=22,23 dchan=24 --- zapata.conf --- switchtype = euroisdn pridialplan = dynamic prilocaldialplan = local nationalprefix = 0 internationalprefix = 00 usecallingpres = yes echocancel = yes echocancelwhenbridged = yes echotraining = 100 callprogress=yes context=isdn-incoming group = 1 ; S/T port 1,2,7,8 channel = 1-2 channel = 4-5 ;channel = 19-20 channel = 22-23 context=pbx-incoming group = 2 channel = 7-8 channel = 10-11 ;channel = 13-14 channel = 16-17 - Here's the output BRI debug when I try to make outbound calls from a SIP phone : -- Executing Dial(SIP/400-c8dc, Zap/1/1013) 1 -- Making new call for cr 137 -- Requested transfer capability: 0x00 - SPEECH 1 Protocol Discriminator: Q.931 (Cool len=26 1 Call Ref: len= 1 (reference 9/0x9) (Originator) 1 Message type: SETUP (5) 1 [1 041 031 801 901 a31 ] 1 Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0) 1 Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) 1 Ext: 1 User information layer 1: A-Law (35) 1 [1 181 011 811 ] 1 Channel ID (len= 3) [ Ext: 1 IntID: Implicit, Other Spare: 0, Preferred Dchan: 0 1 ChanSel: B1 channel 1 ] 1 [1 6c1 051 411 801 341 301 301 ] 1 Calling Number (len= 7) [ Ext: 0 TON: Subscriber Number (4) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) 1 Presentation: Presentation permitted, user number not screened (0) '400' ] 1 [1 701 051 c11 311 301 311 331 ] 1 Called Number (len= 7) [ Ext: 1 TON: Subscriber Number (4) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '1013' ] -- Called 1/1013 1 Protocol Discriminator: Q.931 (Cool len=8 1 Call Ref: len= 1 (reference 137/0x89) (Terminator) 1 Message type: RELEASE COMPLETE (90) 1 [1 081 021 871 e41 ] 1 Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: International network (7) 1 Ext: 1 Cause: Unknown (100), class = Protocol Error (6) ] 1 -- Processing IE 8 (cs0, Cause) -- Channel 0/1, span 1 got hangup, cause 100 1 NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null 1 NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null -- Hungup 'Zap/1-1' == Everyone is busy/congested at this time (1:0/0/1) -- Executing Hangup(SIP/400-c8dc, ) == Spawn extension (default, 1013, 2) exited non-zero on 'SIP/400-c8dc' 1 received TEI check request for TEI = 127 I've already tested several configurations for zapata.conf especially with the pridialplan and switchtype lines but without success. Could you help me to analyse and solve this odd problem ? Thank you in advance, -- Sébastien Mortier AbsysTech Tel : +33 3 20 50 99 02 Fax : +33 3 20 74 50 05 Gsm : +33 6 20 79 24 29 http://www.absystech.fr
RE: [Asterisk-Users] ISDN Protocol Unknom Error with Junghanns OctoBRI
I think that you are sending an outgoing caller id that is not part of the DID range. Most operators do not allow this. ISDN/Telephony Numbering Plan (E.164/E.163) (1) '1013' ] Are you using caller id 1013 ? Change it to a number that is part of your trunks. Henk -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sébastien Mortier Sent: maandag 20 maart 2006 11:52 To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] ISDN Protocol Unknom Error with Junghanns OctoBRI Hello, I recently bought a Junghanns Octobri Card. I have some problems with this card to make outbound calls but I can receive calls. I have 3 lines to PSTN and 3 lines to my existing PBX FRANCE TELECOM -- OctoBRI -- Asterisk 1.2.4-BRIstuffed-0.3.0-PRE-1h -- OctoBRI -- PABX e-Generis ISDN Phones | | SIP Phones France Telecom -- SIP Phones : Works France Telecom -- ISDN Phones : Works SIP Phones -- ISDN Phones : Works ISDN Phones - SIP Phones : Works SIP Phones -- France Telecom : DOESN'T WORK ISDN Phones - France Telecom : DOESN'T WORK Here are some characteristics of my Asterisk Setup OS Linux Gentoo 2.6.15-r1 zaptel 1.2.3 libpri 1.2.2 asterisk 1.2.4-BRIstuffed-0.3.0-PRE-1h ISDN Lines : EuroISDN not EuroISDN+ Junghanns OctoBRI PCI ISDN Card S/T 1+8 - S/T 2+7 : TE Mode S/T 3+6 - S/T 4+5 : NT Mode modprobe qozap ports=60 zaptel.conf --- loadzone=fr defaultzone=fr # qozap span definitions # most of the values should be bogus because we are not really zaptel span=1,1,3,ccs,ami span=2,0,3,ccs,ami span=3,0,3,ccs,ami span=4,0,3,ccs,ami span=5,1,3,ccs,ami span=6,0,3,ccs,ami span=7,0,3,ccs,ami span=8,0,3,ccs,ami bchan=1,2 dchan=3 bchan=4,5 dchan=6 bchan=7,8 dchan=9 bchan=10,11 dchan=12 bchan=13,14 dchan=15 bchan=16,17 dchan=18 bchan=19,20 dchan=21 bchan=22,23 dchan=24 --- zapata.conf --- switchtype = euroisdn pridialplan = dynamic prilocaldialplan = local nationalprefix = 0 internationalprefix = 00 usecallingpres = yes echocancel = yes echocancelwhenbridged = yes echotraining = 100 callprogress=yes context=isdn-incoming group = 1 ; S/T port 1,2,7,8 channel = 1-2 channel = 4-5 ;channel = 19-20 channel = 22-23 context=pbx-incoming group = 2 channel = 7-8 channel = 10-11 ;channel = 13-14 channel = 16-17 - Here's the output BRI debug when I try to make outbound calls from a SIP phone : -- Executing Dial(SIP/400-c8dc, Zap/1/1013) 1 -- Making new call for cr 137 -- Requested transfer capability: 0x00 - SPEECH 1 Protocol Discriminator: Q.931 (Cool len=26 1 Call Ref: len= 1 (reference 9/0x9) (Originator) 1 Message type: SETUP (5) 1 [1 041 031 801 901 a31 ] 1 Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0) 1 Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) 1 Ext: 1 User information layer 1: A-Law (35) 1 [1 181 011 811 ] 1 Channel ID (len= 3) [ Ext: 1 IntID: Implicit, Other Spare: 0, Preferred Dchan: 0 1 ChanSel: B1 channel 1 ] 1 [1 6c1 051 411 801 341 301 301 ] 1 Calling Number (len= 7) [ Ext: 0 TON: Subscriber Number (4) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) 1 Presentation: Presentation permitted, user number not screened (0) '400' ] 1 [1 701 051 c11 311 301 311 331 ] 1 Called Number (len= 7) [ Ext: 1 TON: Subscriber Number (4) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '1013' ] -- Called 1/1013 1 Protocol Discriminator: Q.931 (Cool len=8 1 Call Ref: len= 1 (reference 137/0x89) (Terminator) 1 Message type: RELEASE COMPLETE (90) 1 [1 081 021 871 e41 ] 1 Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: International network (7) 1 Ext: 1 Cause: Unknown (100), class = Protocol Error (6) ] 1 -- Processing IE 8 (cs0, Cause) -- Channel 0/1, span 1 got hangup, cause 100 1 NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null 1 NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null -- Hungup 'Zap/1-1' == Everyone is busy/congested at this time (1:0/0/1) -- Executing Hangup(SIP/400-c8dc, ) == Spawn extension (default, 1013, 2) exited non-zero on 'SIP/400-c8dc' 1 received TEI check request for TEI = 127 I've already tested several configurations for zapata.conf especially with the pridialplan and switchtype lines but without success. Could you help me to analyse and solve this odd problem ? Thank you in advance, -- Sébastien Mortier AbsysTech Tel : +33 3 20 50 99 02 Fax : +33 3 20 74 50 05 Gsm : +33 6 20 79 24 29 http://www.absystech.fr ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by
Re: [Asterisk-Users] ISDN Protocol Unknom Error with Junghanns OctoBRI
On Mon, 2006-03-20 at 11:51 +0100, Sébastien Mortier wrote: Hello, I recently bought a Junghanns Octobri Card. I have some problems with this card to make outbound calls but I can receive calls. I have 3 lines to PSTN and 3 lines to my existing PBX FRANCE TELECOM -- OctoBRI -- Asterisk 1.2.4-BRIstuffed-0.3.0-PRE-1h -- OctoBRI -- PABX e-Generis ISDN Phones | | SIP Phones France Telecom -- SIP Phones : Works France Telecom -- ISDN Phones : Works SIP Phones -- ISDN Phones : Works ISDN Phones - SIP Phones : Works SIP Phones -- France Telecom : DOESN'T WORK ISDN Phones - France Telecom : DOESN'T WORK zaptel.conf --- loadzone=fr defaultzone=fr # qozap span definitions # most of the values should be bogus because we are not really zaptel span=1,1,3,ccs,ami span=2,0,3,ccs,ami span=3,0,3,ccs,ami span=4,0,3,ccs,ami span=5,1,3,ccs,ami span=6,0,3,ccs,ami span=7,0,3,ccs,ami span=8,0,3,ccs,ami I was going mad with a Quadbri until I changed ccs,ami to ccs,hdb3 and it's been running 6 months now. -- Dave Cotton [EMAIL PROTECTED] ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] ISDN Protocol Unknom Error with Junghanns OctoBRI
On 3/21/06, Dave Cotton [EMAIL PROTECTED] wrote: span=1,1,3,ccs,ami I was going mad with a Quadbri until I changed ccs,ami to ccs,hdb3 and it's been running 6 months now. Dave, nice to read on this, can you explain what was going wrong when you used ccs,ami? And how did you find out about placing hdb3 there? As a quadbri user, I'm curious about this :) cheers ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] ISDN Protocol Unknom Error with Junghanns OctoBRI
On Tue, 2006-03-21 at 19:50 +0100, stoffell wrote: On 3/21/06, Dave Cotton [EMAIL PROTECTED] wrote: span=1,1,3,ccs,ami I was going mad with a Quadbri until I changed ccs,ami to ccs,hdb3 and it's been running 6 months now. Dave, nice to read on this, can you explain what was going wrong when you used ccs,ami? And how did you find out about placing hdb3 there? As far as I can remember it was much the same as the OP, I could get incoming calls but no outgoing. It was the French company that supplied the QuadBri that suggested trying the hdb3 setting. -- Dave Cotton [EMAIL PROTECTED] ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users