AMTo:
'Asterisk Users Mailing List - Non-Commercial Discussion'Subject:
RE: [Asterisk-Users] Dial command to connect two channels and bypassasterisk
server
this is not usefull for public enviroment. clients behind
nat does not work...
turby
From: [EMAIL PROTECTED]
[mailto
Wai Wu wrote:
If Asterisk is in the public network, it will work. The problem is when
Asterisk is behind NAT and one of the client is also behind the same NAT.
No, it won't. If one of the clients is behind a NAT firewall, you cannot
tell that firewall to start accepting media directly from the
Unless you use SIP ALG (Application Layer Gateway) like the module in netfilter to set the expectations? correct?
RegardsOn 2/14/06, Kevin P. Fleming [EMAIL PROTECTED] wrote:
Wai Wu wrote:
If Asterisk is in the public network, it will work. The problem is when
Asterisk is behind NAT and one of
Moises Silva wrote:
Unless you use SIP ALG (Application Layer Gateway) like the module in
netfilter to set the expectations? correct?
If that exists on every NAT firewall in the path to both clients, yes.
___
--Bandwidth and Colocation provided by