On Wed, May 21, 2008 at 04:09:33PM -0500, Lyle Giese wrote:
Around here, the telco locks that cabinet and there is a user id/password
required to use that craft interface. (I have a key, but then I worked for
the telco for 23 years and have a few insider tools laying around)
They are
On Wed, May 21, 2008 at 05:20:27PM -0400, Alex Balashov wrote:
Not only that, but Jay's suggestion is going to give you the performance
monitoring data off the smartjack itself, not off of any portion of the
span beyond the smartjack.
So, if you are receiving errors on the part that runs
On Tue, May 20, 2008 at 07:03:06PM -0500, Lyle Giese wrote:
Is there a way to see error counts on the T1 of a PRI? Hooked up to
asterisk via a digium TE122. Looking for something to make sure I'm not
getting any CRC, framing or other errors on the T1.
Go on ebay and buy an
Hello,
In Asterisk you can type zap show status to at least show you some
basic error information:
CLI zap show status
Description Alarms IRQbpviol CRC4
wanpipe1 card 0 OK 0 0 0
wanpipe2 card 1
Joe Pukepail wrote:
Is there a way to see error counts on the T1 of a PRI?
Hooked up to asterisk via a digium TE122. Looking for
something to make sure I'm not getting any CRC, framing or
other errors on the T1.
Many moons ago I use to used a program called zttool. It
Don Pobanz wrote:
Joe Pukepail wrote:
Is there a way to see error counts on the T1 of a PRI?
Hooked up to asterisk via a digium TE122. Looking for
something to make sure I'm not getting any CRC, framing or
other errors on the T1.
Many moons ago I use to used a
Jay R. Ashworth wrote:
On Tue, May 20, 2008 at 07:03:06PM -0500, Lyle Giese wrote:
Is there a way to see error counts on the T1 of a PRI? Hooked up to
asterisk via a digium TE122. Looking for something to make sure I'm not
getting any CRC, framing or other errors on the T1.
Lyle Giese wrote:
Jay R. Ashworth wrote:
On Tue, May 20, 2008 at 07:03:06PM -0500, Lyle Giese wrote:
Is there a way to see error counts on the T1 of a PRI? Hooked up to
asterisk via a digium TE122. Looking for something to make sure I'm
not
getting any CRC, framing or other
Joe Pukepail wrote:
Is there a way to see error counts on the T1 of a PRI? Hooked up to
asterisk via a digium TE122. Looking for something to make sure I'm
not getting any CRC, framing or other errors on the T1.
Using asterisk 1.4.19 and zaptel 1.4.10
Go on ebay and buy an ADC Kentrox