Re: [asterisk-users] Sending and receiving fax with Digium FFA
The output of a failed incoming fax: http://pastebin.com/S58j0WbW A failed outgoing fax: http://pastebin.com/eqveVZgK It seems to me that I installed it. fax show licenses Fax Licensing Information == Free fax licenses: 1 Total licensed ports: 1 Also, @John, there indeed seemed to be a syntax mistake, but Asterisk never complained, so I didn't notice it. Unfortunately, even after correcting it the fax exhibits the same behaviour. On 08/11/2014 06:02 PM, Kevin Larsen wrote: Hello. I've been trying to setup Free Fax for Asterisk on a Debian machine with Asterisk 1.8. I have managed to register and installed the Digium modules. Sending and receiving through it have resulted in failure. The output of fax show capabilities is: Registered FAX Technology Modules: Type: DIGIUM Description : Digium FAX Driver Capabilities: SEND RECEIVE T.38 G.711 MULTI-DOC 1 registered modules We have a fax blackbox through which I'm trying to send faxes to the Asterisk server. Every time that I send a fax I get a timeout error. Been tinkering with the settings and whatnot to get it working. The extension to receive fax: exten = recvfax,1,Verbose(2,Receiving fax) same = n,Set(FAXDEST=/tmp/fax) same = n,Set(tempfax=${STRFTIME(,,%C%y%m%d%H%M)}) same = n,Wait(8) same = n,ReceiveFax(${FAXDEST}/${tempfax}.tiff,f,d) It's without most of the tinkering I've done, which are: setting ecm to no, tweaking the min/max rate and other things. Also, because the fax machine can't print (half broken), we receive our faxes through a fax to email service we have subscribed to, so the tests for sending have that one as a destination. The extension to send fax: exten = sendfax,1,Verbose(2,Sending fax) same = n,Set(faxlocation=/tmp) same = n,Set(faxfile=fax.tiff) same = n,Set(FAXOPT(headerinfo)=Testing FAX) same = n,Set(FAXOPT(localstationid)=123456) same = n,SendFax(${faxlocation}/${faxfile},d) same = n,Verbose(2, Fax Status: ${FAXOPT(error)}) I did the exact same thing, and tried sending from both a SIP channel and a DAHDI line. The weird thing is that when I am sending through Asterisk I get, as a response to fax, a recorded message from the telco. Sending through the same line with the fax machine works perfectly. Any advice and help is welcome. Can you post the output of the Asterisk CLI from a failed fax call? What you have looks ok for the most part, at least on the receiving end. Did you install the license key for the Free FAX for Asterisk module? -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Sending and receiving fax with Digium FFA
Hello. I've been trying to setup Free Fax for Asterisk on a Debian machine with Asterisk 1.8. I have managed to register and installed the Digium modules. Sending and receiving through it have resulted in failure. The output of fax show capabilities is: Registered FAX Technology Modules: Type: DIGIUM Description : Digium FAX Driver Capabilities: SEND RECEIVE T.38 G.711 MULTI-DOC 1 registered modules We have a fax blackbox through which I'm trying to send faxes to the Asterisk server. Every time that I send a fax I get a timeout error. Been tinkering with the settings and whatnot to get it working. The extension to receive fax: exten = recvfax,1,Verbose(2,Receiving fax) same = n,Set(FAXDEST=/tmp/fax) same = n,Set(tempfax=${STRFTIME(,,%C%y%m%d%H%M)}) same = n,Wait(8) same = n,ReceiveFax(${FAXDEST}/${tempfax}.tiff,f,d) It's without most of the tinkering I've done, which are: setting ecm to no, tweaking the min/max rate and other things. Also, because the fax machine can't print (half broken), we receive our faxes through a fax to email service we have subscribed to, so the tests for sending have that one as a destination. The extension to send fax: exten = sendfax,1,Verbose(2,Sending fax) same = n,Set(faxlocation=/tmp) same = n,Set(faxfile=fax.tiff) same = n,Set(FAXOPT(headerinfo)=Testing FAX) same = n,Set(FAXOPT(localstationid)=123456) same = n,SendFax(${faxlocation}/${faxfile},d) same = n,Verbose(2, Fax Status: ${FAXOPT(error)}) I did the exact same thing, and tried sending from both a SIP channel and a DAHDI line. The weird thing is that when I am sending through Asterisk I get, as a response to fax, a recorded message from the telco. Sending through the same line with the fax machine works perfectly. Any advice and help is welcome. Can you post the output of the Asterisk CLI from a failed fax call? What you have looks ok for the most part, at least on the receiving end. Did you install the license key for the Free FAX for Asterisk module?-- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Sending and receiving fax with Digium FFA
Hello; Just taking a quick glance at it, I think you have a syntax error in your dial plan. Instead of ReceiveFax(${FAXDEST}/${tempfax}.tiff,f,d, shouldn't it be ReceiveFax(${FAXDEST}/${tempfax}.tiff,fd) with no comma between the f and d options? Regards; John From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Dumitru Sent: Monday, August 11, 2014 9:39 AM To: asterisk-users@lists.digium.com Subject: [asterisk-users] Sending and receiving fax with Digium FFA Hello. I've been trying to setup Free Fax for Asterisk on a Debian machine with Asterisk 1.8. I have managed to register and installed the Digium modules. Sending and receiving through it have resulted in failure. The output of fax show capabilities is: Registered FAX Technology Modules: Type: DIGIUM Description : Digium FAX Driver Capabilities: SEND RECEIVE T.38 G.711 MULTI-DOC 1 registered modules We have a fax blackbox through which I'm trying to send faxes to the Asterisk server. Every time that I send a fax I get a timeout error. Been tinkering with the settings and whatnot to get it working. The extension to receive fax: exten = recvfax,1,Verbose(2,Receiving fax) same = n,Set(FAXDEST=/tmp/fax) same = n,Set(tempfax=${STRFTIME(,,%C%y%m%d%H%M)}) same = n,Wait(8) same = n,ReceiveFax(${FAXDEST}/${tempfax}.tiff,f,d) It's without most of the tinkering I've done, which are: setting ecm to no, tweaking the min/max rate and other things. Also, because the fax machine can't print (half broken), we receive our faxes through a fax to email service we have subscribed to, so the tests for sending have that one as a destination. The extension to send fax: exten = sendfax,1,Verbose(2,Sending fax) same = n,Set(faxlocation=/tmp) same = n,Set(faxfile=fax.tiff) same = n,Set(FAXOPT(headerinfo)=Testing FAX) same = n,Set(FAXOPT(localstationid)=123456) same = n,SendFax(${faxlocation}/${faxfile},d) same = n,Verbose(2, Fax Status: ${FAXOPT(error)}) I did the exact same thing, and tried sending from both a SIP channel and a DAHDI line. The weird thing is that when I am sending through Asterisk I get, as a response to fax, a recorded message from the telco. Sending through the same line with the fax machine works perfectly. Any advice and help is welcome. -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users