Thanks for Your answer and Your suggestion. After some minor problems
the build completed
and I was able to boot the iso image in my VMWare environment. Meanwhile
0.6.2 is released
and it makes sense to start with the actual version. So I will do a
build on that version with the
suggested environment variables set and then proceed to include the
FritzCard driver.
Dieter
Philip A. Prindeville schrieb:
> Try:
>
> export LANG=C SHELL="/bin/bash" ; make
>
> next time. Let me repeat for Mark and Dieter and everyone else.
> Building in any other language than English is not supported, and *will*
> break. I guarantee it.
>
> -Philip
>
>
> Dieter Raith wrote:
>
>> I got the following error message. As I have read that most developers
>> of astlinux use Ubuntu, I have setup
>> a virtual system Ubuntu 8.10. Kernel is 2.6.27.-9-generic. The reason
>> while I do not use the ready to use
>> system is the fact, that I want to use a Fritz!Card for EuroISDN which
>> is no longer supported. So if I want to
>> use it, I am forced to build the system from the SVN sources. I googled
>> about that error, but all the answers
>> seemed to have nothing to do with the problem. This error in Setup
>> happens in the defining part of the
>> subroutines and the script never started to work. I worked hours to
>> check where the problem could be without
>> success and was very close to give up. I talked with my colleagues and
>> one proposed to replace /bin/sh with /bin/bash. And it worked!!!!
>> As I am not (yet) deeply involved in the development of astlinux, I
>> hope that someone will care for it and
>> correct it in the sources if it is not a problem Ubuntu 8.10 which I use.
>> Rgds
>> Dieter
>>
>> Error message:
>> ############
>> make[1]: Betrete Verzeichnis '/raith/astlinux-0.6/build_i586/wanpipe-3.3.10'
>>
>> +--------- Wanpipe Build Info --------------+
>>
>> Compiling Wanpipe with ZAPTEL Support!
>> Zaptel Dir: /raith/astlinux-0.6/build_i586/zaptel-1.4.12.1/kernel
>>
>> touch: kann "/etc/wanpipe/.zaphdlc" nicht berühren: No such file or
>> directory
>> Zaptel HW HDLC support detected
>>
>> Please recompile and reinstall ZAPTEL after installation
>>
>> +-------------------------------------------+
>>
>> Done
>> ./Setup drivers
>> --builddir=/raith/astlinux-0.6/build_i586/wanpipe-3.3.10/ast_build_dir
>> --with-linux=/raith/astlinux-0.6/build_i586/linux-2.6.20.21-astlinux
>> --zaptel-path=/raith/astlinux-0.6/build_i586/zaptel-1.4.12.1/kernel
>> --usr-cc=/raith/astlinux-0.6/build_i586/staging_dir/bin/i586-linux-uclibc-gcc
>> --protocol=DEF-TDM --no-zaptel-compile --noautostart --arch=i386 --silent
>> ./Setup: 1357: Syntax error: "(" unexpected
>> make[1]: *** [all_bin_kmod] Fehler 2
>> make[1]: Verlasse Verzeichnis
>> '/raith/astlinux-0.6/build_i586/wanpipe-3.3.10'
>> make: *** [/raith/astlinux-0.6/build_i586/wanpipe-3.3.10/.built] Fehler2
>>
>>
>>
>
>
>
>
>
> ------------------------------------------------------------------------------
> Check out the new SourceForge.net Marketplace.
> It is the best place to buy or sell services for
> just about anything Open Source.
> http://p.sf.net/sfu/Xq1LFB
> _______________________________________________
> Astlinux-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/astlinux-users
>
> Donations to support AstLinux are graciously accepted via PayPal to
> [email protected].
>
>
--
Dieter Raith
HLRS - Universität Stuttgart
Nobelstrasse 19, D-70569 Stuttgart
Tel.: +49 (0)711 / 685-87224, Fax: +49 (0)711 / 685 77224
------------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It is the best place to buy or sell services for
just about anything Open Source.
http://p.sf.net/sfu/Xq1LFB
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
[email protected].
