I followed the instructions here:
http://www.astlinux.org/node/44
And see no instruction to gunzip, but I have been known to misread!
Once it failed, I figured that out, but others attempting to follow the
excellent step by step instructions may not.
BTW - other than that, the rest of the pr
John,
Were you not gunzip'ing the downloaded file? I updated the instructions
to make that clearer.
Darrick
On 06/26/2009 04:10 PM, John Novack wrote:
> I attempted a new install today from the web page, and found I had to
> change the procedure.
> Hp Thin client 5720 with a 1 Gig flash
>
> Bo
I attempted a new install today from the web page, and found I had to
change the procedure.
Hp Thin client 5720 with a 1 Gig flash
Boot with Damn Small Linux off a USB stick
Run fdisk to clear any partition
When I follow the procedure outlined on the Astlinux site, it fails
If instead, I gunzip
can anyone help me with settings in rc.conf for Wlan with WPA2 PSK key
i would like to use astlinux as router, as pbx with AP and firewall
i have now the nevest astlinux
nedi
--
The kernel used on the 0.6.x branch won't properly support that chipset
without a patch. An image from trunk should work fine. We hope to have
some early test images available soon if you don't want to build your own.
Darrick
On 06/26/2009 08:21 AM, Tom Lynn wrote:
> For what it's worth, I'm
For what it's worth, I'm using this same board with CentOS 5.3 with no
ethernet interface issues.
2009/6/26 Benny Strömberg
> Hi,
>
> I get the following error when booting Astlinux:
>
> r8169: eth0: link down
>
> It´s a Intel D945GCLF2D motherboard with a Realtek 8111C NIC.
> The network card
Hi,
I get the following error when booting Astlinux:
r8169: eth0: link down
It´s a Intel D945GCLF2D motherboard with a Realtek 8111C NIC.
The network card gets discovered but dhcp can´t find an address. I googled
around and there several others have had similar problems. Does anybody come
acro
