Hi again,
Just as an update to those who are curious, I've gotten the card working
on a Soekris running Asterisk 1.6.0.9 and Dahdi 2.1.0.4. It's not using
AstLinux though, I just ported it to the embedded distribution we
maintain internally.
I did some stress testing by having one client running
On Fri, 29 May 2009 10:18:49 -0400, Josh Mahonin wrote:
>Hi Michael,
>
>You raise a good point. I have previously been using a 1200Mhz VIA-board
>as the basis for a media gateway, which has been more than adequate for
>what I need. Unfortunately, it's running Asterisk off of a hard drive,
>and we'
Hi Michael,
You raise a good point. I have previously been using a 1200Mhz VIA-board
as the basis for a media gateway, which has been more than adequate for
what I need. Unfortunately, it's running Asterisk off of a hard drive,
and we've had stability issues with this series of boards in the past.
On Wed, 27 May 2009 10:18:28 -0500, Lonnie Abelbeck wrote:
>Interesting...
>
>TC400B - Voice Processing - Data Sheet
>http://docs.digium.com/TC400B/tc400b-datasheet.pdf
>
>It would be cool if of a lower than 120 G.729a Transcodes option was
>available for a lower cost for embedded applications.
>Interesting...
>
>TC400B - Voice Processing - Data Sheet
>http://docs.digium.com/TC400B/tc400b-datasheet.pdf
>
>It would be cool if of a lower than 120 G.729a Transcodes option was
>available for a lower cost for embedded applications.
>
>Lonnie
>
>On May 27, 2009, at 10:00 AM, Darrick Hartman wr
Interesting...
TC400B - Voice Processing - Data Sheet
http://docs.digium.com/TC400B/tc400b-datasheet.pdf
It would be cool if of a lower than 120 G.729a Transcodes option was
available for a lower cost for embedded applications.
Lonnie
On May 27, 2009, at 10:00 AM, Darrick Hartman wrote:
> I'
I've not used the transcoder hardware card. Looks interesting though.
Udev should handle creating the correct devices, but it's likely that
Digium won't officially support the card unless it's on a system with
Dahdi. We're working towards that, but won't officially support Dahdi
until after t
Hi all,
I've been using the Digium TC400 G729/G711 transcoder card in various
Asterisk installations for a while with great results, but I'd like to
start using it on an embedded platform, such as the Soekris net5501.
I grabbed AstLinux 0.6.5, and with some symlinking (/dev/zaptranscode =>
/dev/z
