, November 01, 2008 1:08 PM
To: astlinux-users@lists.sourceforge.net
Subject: Re: [Astlinux-users] HP T5700 Thinclient issues with Installing
Astlinux 0.6
Darrick,
Thanks for your advice on my HP T5700 issue -- I added a rootdelay=10
in the .run.conf file on my USB stick and the result was:
sda: 0:0
MAIL PROTECTED]>
> Subject: Re: [Astlinux-users] HP T5700 Thinclient issues with
> Installing Astlinux 0.6
> To: AstLinux Users Mailing List
> Message-ID: <[EMAIL PROTECTED]>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Brian,
>
>
Brian,
I'm assuming sda is the usb stick? Some hardware requires a delay at
boot time for the usb to become ready. You can try adding rootdelay=10
to you KCMD line in the astlinux-xx.run.conf file.
May be faster/better to use an internal drive. They make some nice
direct plugin flash device
brianbarr wrote:
> My favored platform for Astlinux is the small, cheap, compact, quiet
> and low power T5700 series of x86 based thin client boxes that can be
> had for <$100 on ebay.
>
I have configured quite a few of the T5xxx series myself.
> I am having major problems, however in installin
