Initial QCA99X0 support has a known issue with TCP Tx throughput.
All other path such as UDP Tx/Rx and TCP Rx meet their expectation
( 900Mbps), but TCP Tx marked as low as 5Mbps when single pair is
used on iperf.
The root cause is turned out because TSO flag is not initialized
properly so that
Hi Michal
It is finally working with irq_mode=1 and kvalo-master . The output is
below; However it takes a lot of time to load/unload the device with
successive firmwares. I ll try to find a solution for this on my own.
Is it better to blacklist some module as you said earlier or create a
Alexandre Maloteaux a.malote...@gmail.com writes:
0x003405ff, 168c:003e:1a56:1525 fallback) fw killer-n1525-fw api 4
htt-ver 3.0 wmi-op 4 htt-op 3 cal otp max-sta 32 features
\xff80\xffd4\xffa8\xfff9\xff88\x\x
What's happening with the features string here?
What's happening with the features string here? What might cause that?
I used the sumdog binaries from github,maybe this is related. I ll try
with my own firmware-4.bin from dissect/assemble and board.bin from
clevo driver and i ll report if i get the same string
On 07/23/2015 03:03 PM, Kalle
Hi
I just received a Clevo P750ZM (eurocom P5 pro) with a QCA6174
06:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless
Network Adapter (rev 20)
Hi have tested the dissect/assemble procedure described here :
Hi Michal
With latest kvalo-master. I m getting this error on boot and after
irq_mode=1
I used sumdog firmwares from github :
[ 255.996373] ath10k_pci :06:00.0: enabling device ( - 0002)
[ 255.997129] ath10k_pci :06:00.0: pci irq msi-x interrupts 8
irq_mode 0 reset_mode 0
[
On 23 July 2015 at 10:47, Alexandre Maloteaux a.malote...@gmail.com wrote:
Hi Michal
There's an unofficial image that's lying in a pull request on
github[1] you could use. It probably needs skip_otp parameter to be
used.
I think this is the sumdog firmwares; i tested them and i made all the
Hi
What is the head commit id (kvalo/master) that you've used? You might
be missing a patches[1][2] that fixed a recent breakage in the dev
tree.
I m getting this issue only with kvalo-qca branch.
With kvalo master i m getting this issue below
Do you still want me to do the tracing part on
On 23 July 2015 at 11:33, Alexandre Maloteaux a.malote...@gmail.com wrote:
Hi
What is the head commit id (kvalo/master) that you've used? You might
be missing a patches[1][2] that fixed a recent breakage in the dev
tree.
I m getting this issue only with kvalo-qca branch.
With kvalo master
On 23 July 2015 at 10:05, Alexandre Maloteaux a.malote...@gmail.com wrote:
Hi
I just received a Clevo P750ZM (eurocom P5 pro) with a QCA6174
06:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless
Network Adapter (rev 20)
Hi have tested the dissect/assemble procedure
Hi Michal
There's an unofficial image that's lying in a pull request on
github[1] you could use. It probably needs skip_otp parameter to be
used.
I think this is the sumdog firmwares; i tested them and i made all the
test with the skip_otp parameter
This looks interesting. Can you please:
11 matches
Mail list logo