hi,
which reference design? which kernel? What does the driver say?
-a
On 9 May 2017 at 16:26, Guo Feng <18511331...@126.com> wrote:
> To whomever may can help,
>
>
> Recently, I got one reference design board with a qca9994 802.11ac Wave2
> pcie module.
>
>
> And now I have bring up the boa
On 05/12/2017 12:21 PM, Steve deRosier wrote:
Hi Ben,
On Fri, May 12, 2017 at 7:12 AM, Ben Greear wrote:
On 05/11/2017 04:38 AM, Kalle Valo wrote:
Simon Wunderlich writes:
it seems like there was some discussion here and I wouldn't expect too
many
more opinions ... do you think we can h
Hi Ben,
On Fri, May 12, 2017 at 7:12 AM, Ben Greear wrote:
>
>
> On 05/11/2017 04:38 AM, Kalle Valo wrote:
>>
>> Simon Wunderlich writes:
>>
>>> it seems like there was some discussion here and I wouldn't expect too
>>> many
>>> more opinions ... do you think we can have a decision based on what
Thanks Erik for your reply. Your information is very useful to us.
Ann
On Fri, May 12, 2017 at 7:51 AM, Erik Stromdahl
wrote:
>
>
> On 2017-05-12 02:20, Ann Lo wrote:
>>
>> Hi Erik,
>>
>> We are hoping to use your new SDIO patches for QCA9377 on kernel
>> version 4.1.36. There appears to be vers
On 2017-05-12 02:20, Ann Lo wrote:
Hi Erik,
We are hoping to use your new SDIO patches for QCA9377 on kernel
version 4.1.36. There appears to be version 7 patches according to the
following email:
http://lists.infradead.org/pipermail/ath10k/2017-April/009633.html
Would you advise on the follo
What chipset, and what firmware version?
Thanks,
Ben
On 05/12/2017 07:43 AM, Krishna Chaitanya wrote:
Hi,
I am doing some comparative tests, wanted to configure common
settings btw all STA's. wanted to limit agg_size to 24 in ath10k with
the below command.
echo "3 24" > /sys/kernel/debug/ieee
Hi,
I am doing some comparative tests, wanted to configure common
settings btw all STA's. wanted to limit agg_size to 24 in ath10k with
the below command.
echo "3 24" > /sys/kernel/debug/ieee80211/phy0/ath10k/htt_max_amsdu_ampdu
The ADDBA request still has 64 and when i run iperf it is aggregati
On 05/11/2017 04:38 AM, Kalle Valo wrote:
Simon Wunderlich writes:
it seems like there was some discussion here and I wouldn't expect too many
more opinions ... do you think we can have a decision based on what has been
discussed here?
Well, there was an excellent reply from Steve and quit
