On Wed, 14 Nov 2018 at 03:51, Wen Gong wrote:
>
> When test simulate firmware crash, it is easy to trigger error.
> command:
> echo soft > /sys/kernel/debug/ieee80211/phyxx/ath10k/simulate_fw_crash.
>
> If input more than two times continuously, then it will have error.
> Error message:
>
When test simulate firmware crash, it is easy to trigger error.
command:
echo soft > /sys/kernel/debug/ieee80211/phyxx/ath10k/simulate_fw_crash.
If input more than two times continuously, then it will have error.
Error message:
ath10k_pci :02:00.0: failed to set vdev 1 RX wake policy: -108
QCA6174A/QCA9377 PCIe chips support PCIe L1 and L1SS, and indicate the
L1/L1SS capabilities in PCI configuration space. Currently ath10k driver
write target PCIe config flags to disallow HW enter into L1, this leads
some HW modules are still powered up even when both system PCIe RC and
is it possible to supply a firmware for 99X0 based devices which suffer
from the same issue? i know the firmware codebase is the same for these
chipsets and there are alot of embedded
devices around which this older one. unfortunatly this device suffers
from the same issue
Sebastian
Am