> -Original Message-
> From: ath10k On Behalf Of Wen Gong
> Sent: Wednesday, May 22, 2019 2:24 PM
> To: Claire Chang ; Wen Gong
>
> Cc: open list:NETWORKING DRIVERS (WIRELESS) wirel...@vger.kernel.org>; ath10k@lists.infradead.org
> Subject: [EXT] RE: [PATCH v2] ath10k: add support for
> -Original Message-
> From: ath10k On Behalf Of Wen Gong
> Sent: Wednesday, April 10, 2019 10:45 AM
> To: Brian Norris
> Cc: MichaĆ Kazior ; linux-wireless wirel...@vger.kernel.org>; ath10k@lists.infradead.org; Wen Gong
>
> Subject: [EXT] RE: [PATCH] ath10k: Remove
Change to the interrupt handler since v1 sounds good to me.
Reviewed-by: Nicolas Boichat
On Thu, May 23, 2019 at 4:53 PM Claire Chang wrote:
>
> Tested-by: Claire Chang
Firmware will report flag with HTT_RX_IND_MPDU_STATUS_TKIP_MIC_ERR
if MIC error, the flag will be used in mac80211.
ieee80211_rx_h_michael_mic_verify will check the flag and start TKIP
countermeasures.
Now countermeasure tests pass both with WPA only and WPA2/WPA mixed
mode.
Tested with QCA6174
> -Original Message-
> From: ath10k On Behalf Of Nicolas
> Boichat
> Sent: Monday, April 29, 2019 1:21 PM
> To: Wen Gong
> Cc: Claire Chang ; linux-wirel...@vger.kernel.org;
> ath10k@lists.infradead.org
> Subject: [EXT] Re: [PATCH] ath10k: add support for simulate crash on SDIO
> chip
>
Currently, below fixed rate commands are broken,
iw wlanx set bitrates legacy-<2.4|5> ht-mcs-<2.4|5> vht-mcs-<2.4|5> \
iw wlanx set bitrates legacy-<2.4|5> ht-mcs-<2.4|5> \
vht-mcs-<2.4|5>
iw wlanx set bitrates legacy-<2.4|5> ht-mcs-<2.4|5> \
vht-mcs-<2.4|5>
There are two methods to set
Hi,
With 5.1 and head kernel, machine running as AP with qca9984 locks up
without being able to complete stack trace to console after a client
tries to associate with it. Following are (OCR transcribed) error
messages:
[ 177.161539] BUG: unable to handle kernel paging request at f7bo